IMPROVEMENT TO SEWAGE DRAINAGE SYSTEM AND TOILET AT 26 ED AF UNDER GE (AF) MARATHAHALLI

Amount

M & L for Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing servicable tiles to store and rubbish off the premises.

M & L for Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, dry and pointed etc all as specified and as directed.

M & L for Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness below or ground level all as specified and as directed.

M & L for Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store all as specified and as directed.

M & L for Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removal to store all as specified and as directed.

M & L for Taking down wooden/PVC shutters exceeding 1Sq.m. and not exceeding 2 Sqm each all as specified and as directed.

M & L for Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden/PVC not exceeding 1.5 Sqm each.

Taking down cement plaster on brick/stone wall including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Taking down cement plaster on RCC Ceiling including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

M & L for Hacking out old broken glass of any thickness and description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and as directed.

M & L for Demolition of brick or stone masonry work built in cement or cement lime mortar of any description including quoins, arches, pillars, etc., all as directed.

M & L for Dismantling structural steel work including doors, windows,gates, rolling sutters etc

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repairs complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC bends of 110 mm dia complete all as specified and directed.

S&F PVC bends of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) 110mm dia branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 110mm dia vent cowl complete all as specified and directed.

S&F PVC (SWR) 75mm dia vent cowl complete all as specified and directed.

M & L for Plain cement concrete 25mm thick 1:2:4, type B0 using 12.5mm graded stone aggregates as in levelling course for tiles all as specified and directed.

M & L for joint free coloured non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 1:4 15mm thick all as specified and as directed

M & L for Glazed ceramic tiles in vertical surface for toilet & Kitchen, 450mm x 350mm x 7 mm /350x250x 7 thick, dark coloured/any design pattern,on wall surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match over 10 mm thick rendering in CM 1:3 all as specified and as directed.

M & L for Refixing of wooden shutters in same opening exceeding 1Sq.m. and not exceeding 2 Sqm each all as specified and as directed. (Note :`refixing' includess taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.

M & Lfor granite (of any type) work (table rubbed and polished) 20mm thk in steps, jambs, pillers, window-cills, cooking platform and like including cutting any shapes for fixing of counter sunk washbasins in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with of pigment to match with shade of granite etc., including 20mm screed bed in CM1:4 all as specified and as directed.

S & F Countersunk Wash hand basin, in repairs,vitreous china, white, flat back, of size 560 x 385mm, with plug and porcelain stopper, brackets,fixing of taps all as specified and as directed.

S & F Countertop Wash hand basin, in repairs,vitreous china, white, flat back, of size 560x 420mm, with plug and porcelain stopper, brackets, all as specified and as directed.

Rigid PVC waste pipe, 32 mm dia, 750mm long, suitable for WHB all as specified and as directed.

M & L Cutting chases, pinning in making good to facings where required in Brick walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20 cm girth all as specified and as directed.

S&F 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fixed in repairs

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fixed in repairs

S&F Bib taps, brass, chromium plated, fancy type, long body, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed.

S&F Push taps, brass, chromium plated, fancy type, for urinals screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed.

Supply and fix in repairs only Pillar taps, brass chromium plated, fancy type, foam flow, screwed down high pressure screwed for iron pipe 15mm bore, fixed in repairs, all as specified and as directed.

S&F Pillar taps long body suitable to countertop wash handbasin, brass chromium plated, fancy type, foam flow, screwed down high pressure screwed for iron pipe 15mm bore, fixed in repairs, all as specified and as directed.

S&F 2in-1 PTMT Bib taps, long shank with flange, regular half turn with foam flow 15mm size fixed in repais all as specified and directed

S&F Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed in repairs all as specified and as directed. (Note: Seat cover make should be same as of WC make)

S&F PVC connections 450mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed.

S&F in repairs PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed.(Note: cistern make should be same as of WC make)

S&F in repairs Health faucet, PTMT with 1 metre flexible tube with wall hook, all as specified and as directed.

S&F in repairs Health faucet, CP with 1 metre flexible tube with wall hook, all as specified and as directed.

S & F PTMT towel ring min wt 90gms, fixed in repairs, all as specified and as directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

S & F Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, all as specified and as directed.

S & F Soap dish, any type vitreous China white, approximate size 160x 160x90mm, fixed in repairs all as specified and as directed.

S & F waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms / 40mm-60 gms) for 32mm dia , all as specified and as directed.

S & F in repairs Stainless steel gratings with frame, 125 mm dia, with or without hole for waste pipe connection all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floor complete, fixed in repairs all as specified and as directed.

S&F Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floor complete fixed in repairs all as specified and as directed.

Removing and refixing of old Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe refixing in old work all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction , with block board core and ply wood face panels, with commercial face veneers on both sides all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by EIC.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, with 150mm long cover plate including provision of vulcanised rubber piece, all as specified and as directed.

S & F extruded aluminium handles 150mm long fabricated type anodised all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and directed.

M & L for 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed type C21 all as specified and as directed.

S&F first class hardwood small fitting such as brackets of any type,latch and hinge blocks, shaped door & window stops and the like, including all necessary labours article not exc 200 cucm each all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, with 150mm long cover plate including provision of vulcanised rubber piece, fixed in repairs, all as specified and as directed.

S & F extruded aluminium handles 150mm long fabricated type anodised fixed in repairs.

S&F Aluminium, anodised, barrel tower bolt of extruded section, 150mm long fixed in repairs.all as specified and directed.

S&F Aluminium alloy 300mm, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs., all as specified and as directed.

M & L for 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed type C21 fixed in repairs all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement.

M & L for Rendering 5 mm thick in cement mortar 1:3 on concrete ceiling finished even and smooth without using extra cement all as specified and directed.

M & L for pre cast cement concrete block masonry with solid block exc 10 cm thk in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C1) all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in n.exc 0.5 sq.m in each pane

M & L for Disconnecting existing PVC water tank of 500 lt. to 1000 lt. Capacity, setting aside or lowering for carrying out roof repairs etc. Including cleaning and removal of all scale , dirt etc from tanks and mouths of circulating pipes, hoisting the tanks, re-connection and re- fixing in position, all as specified and as directed.

M & L for Excavation trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts, wells cesspits, manholes, pier holes etc., n.exc 10Sqm on plan and n.exc 1.5mtr in depth and getting out hard/dense soil.

M&L PCC 1:4:8 type D-2(using 40 mm graded aggregate ) as in foundation filling of manholes or drains

Cutting in to existing man holes for connecting new drains for internal dia of pipe up to 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type 'B1' smooth finished and reforming benching as required complete all as directed.

M & L for Demolition and breaking up drain pipes of internal dia up to 150mm (salt glazed ware, AC or reinforced concrete, PVC of any description) set cement mortar all as specified and directed.

M & L for 150mm bore Reinforced Cement Concrete pipes, class NP 2, laid and jointed complete with and including RCC collars all as specified and as directed.

M&L for concrete bed cement concrete 1:3:6 type C2 150mm dia drain pipe including packing under, and haunching against the sides of pipes after they are laid and tested.

Returning, filling in hard/dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for One coat of white wash on old decorated surfaces of ceilings including necessary preparation of surfaces all as specified and as directed.

M & L for Three coat of white wash on newly plastered surfaces of ceilings including necessary preparation of surfaces, chalk whitening on plastered surfaces all as specified and as directed.

M & L for Complete removal existing tretment on walls washing, rubbing down and stopping of existing treatment applying two coats of white wash on old decorated surfaces of walls including necessary preparation of surfaces all as specified and as directed.

M & L for One coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M & L for 50 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor or path all as specified and as directed.

M & L for providing cement concrete in 1 :2:4 type B1 20mm stone aggregate as in copping

M & L for providing pre cast cement concrete in landing cover slabs (for man holes etc) PCC 1:2:4 type B1 20 mm grade aggregate as in cover slabs set in CM 1:4

M & L for TMT steel bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips

Taking down carefully copper / aluminum point wiring (Light/Fan/Socket/power) complete including fittings and fixtures such as switches , ceiling roses , pendents , regulators , sockets , light fittings etc., and making good the disturbed surfaces of walls/ floors etc complete all as specified and as directed .

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing new steel terminal boxes with new 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One light point controlled by one switch.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc. and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing new steel terminal box with new 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One Exhaust fan point controlled by one switch.

Supply and fix Switch piano flush type single pole one way 5 Amps, 230 V complete all as specified

Supply and Fixing in repairs LED Tube light fitting 1 x 20 W, Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 20W-1 No LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings Complete all as specified and as directed. Make: (i) Cat part No:DMLN1L8-16 of Crompton batten for fitting or its equivalent in Philips / Havell`s. (ii) Cat part No: LTTB-20 tubular lamp LED light Cromption or its equivalent in Philips / Havell`s.

Supply and fix ceiling rose surface PVC / polycarbonate isolated body with three terminals all as specified and as directed.

supply and fixing sheet metal enclouser MCB DB SPN 4 way single door type type suitable bus bar complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 Amps 230 volts 10 KA rupturing capacity

Supply and fix MCB single pole and neutral 6 to 32 Amps 230 volts 10 KA rupturing capacity

Supply fix Exhaust fan 300 mm sweep heavy duty single phase 240 volts AC 50 Hz complete including lovers all as specified and as directed.

All as per item No. 69 here-in-before but exceeding 1.5 m deep and not exceeding 3.00m deep.

Dismantling and breaking up CI pipeset in Cement mortar, 100mm bore and getting out from trenches.

Demolation & breaking up 200mm bore drain pipes (salt glazed ware,AC or reinforeced pipes) set in cement mortar

S&F 200mm dia Reinforced concrete pipes, class NP 3 laid in trenches and joined complete with collars.

S&F 150mm dia Reinforced concrete pipes, class NP 3 laid in trenches and joined complete with collars.

M & L for PCC (1:3:6) type C2 for concrete bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested, compllete all as directed.

M&L for precast cement concrete block masonery with solid blocks, of (1:3:6) type C1 using 20mm aggregate exc. 10cm in width and setting in cement mortar (1:6) complete.

M & L for PCC (1:2:4) type B1(using 20mm graded stone aggregate) as in benching including finishing the concrete surfce even & smoth without using extra cement.

M&L for forming fair finish to channel in main holes using extra cement.

M & L for rendering 15mm thick in CM 1:4 on fair faces brick or cement concrete surfaces & finised even & smoth without using extra cement.

Supply only water proofing compound.

Demolition of RCC of any description and any position.

M&L for Pre-cast cover slab using PCC (1:2:4) type B1 using 20mm aggregate and set in CM 1:6 with top surface finished even and fair complete all as specified.

M&L for TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking bending spirally or hoping for columns, Hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete as repair.

Removing excavated soil to a distance exceed 500m and not exceeding 1.50 Km and deposting at level not exceeding 1.50m above the starting point.

S & F 100mm cast iron solid, waste and went sand cast pipe in any length with or without ears, with cement joints, laid in trenches or in floors/walls.

M & L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in coping and other similar bands complete as directed.

M&L for cement concrete 50mm thick 1:3:6 type C1, using 20mm grade aggregate for repair to damage plinth Protection finished even & smooth without using extra cement complete.

PRAGATHI BUILDERS