ADDITION,ALTERATION AND SPECIAL REPAIRS TO BUILDING NO. P 08 (DELHI BLOCK) AT

Amount

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m and n.exc 250m. complete all as specified and directed.

M & L for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 4 Kg/Sqm of approved make including minimum 10 cm side lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed

M &L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/Rain coat 601 of DR fixit /Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturers instructions complete all as specified and directed.

M & L repair of cracks by Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed.

M&L roof tiles, Mangalore pattern class 'AA', interlocking at side joints, laid dry complete all as specified and directed.

As as item no. 8 here in before except tile complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etc.

M & L 110 mm dia. PVC rain water pipes with Socket all as specified and directed.

S & F in repairs Stack clamps out of 50mm by 5mm including bolts and nuts and securing ends of stay to wall or roof for 110mm pipe.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M&L for Glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) and taking down old tiles complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 20 mm thick in cement mortar(1:4) for laying floor finishes and taking down old tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm and n exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm th screed bed in CM 1:6 complete all as specified and directed.

S&F in repair vitreous china wash basin ,white, flat back size 550x400 mm white excluding taps,waste coupling and pipe but including brackets all as specified and directed.

S & F in 32mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc complete all as specified and directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.

Supply and fixing 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm including bends elbows, tees etc & fixing materials i.e HDPE/PVC gum laid in trenches complete all as specified and directed

S&F Aluminium anodised tubular towel rail 19/20mm dia all as specified and directed.

S&F brackets aluminium anodised, suitable for item No.31 herein before.

S&F in repairs stop valve, cast copper alloy fancy type chromium plated with long shank & cup concealed type for iron pipe of 15mm bore of etc complete all as specified and directed.

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated, screwed for iron pipe15mm bore all as specified and directed.

S&F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S & F in repair mild steel Chromium Plated grating 125mm dia with or without waste hole fixed on floor/ nahani trap with cement mortar, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S & F 15mm bore 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed by Engr-inCharge.

S&F in repairs 80mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15mm bore GI pipe all as specified and as directed. Make:- Jaquar Cat Part No: OHS 1985 or equivalent make as specified here in after.

S&F in repairs brass chromium plated shower arms15mm dia, 190 mm long all as specified and directed. Make : Jaguar Cat No SHA-483 or equivalent in makes Marc/Kohler

S&F in repairs anodised Aluminium alloy curtain rod/hanging rod 19/20mm dia all as specified and directed

S&F in repairs anoised Aluminium alloy bracket with new screws for curtain rod all as specified and directed.

Taking down chowkats exc 1.5 Sqm but n. exc 4 Sqm with shutter (without taking off shutters from the frames) all as specified and directed.

Taking down chowkats n. exc 1.5 Sqm with shutter (without taking off shutters from the frames) all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing.

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250mm long.

S&F aluminium alloy anodised handle, cast type 100mm long.

S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

M&L for second class hardwood LAUREL/ BIJASAL/ BENTEAK/ VENTEAK/ SAL/MATTI as in scantling timber fixed or in chowkhat, style and rails of joinery, wrought, fixed in repairs all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S & F in repair 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall / cub board shutters/selves and the like, etc complete all as specified

S & F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall / cub board shutters/selves and the like, etc complete all as specified

Demolition of Concrete of any description and in any position not otherwise specifically provided for (below or above ground level complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410W(GdeE-250) quality A complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per item No.56 herein above but on steel surfaces

M&L preparing of old painted plastered surface of walls of any description including cornices and applying one coats of acrylic emulsion exterior grade, weather proof antifungal paint complete all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of ceiling including preparation of surfaces all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of surfaces all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L in repair for point wiring complete with 1.5 Sqmm two single core PVC insulated, unsheathed 1100volts agrade cable with stranded copper conductor FR grade conforming to IS-694 part II with ISI mark FR grade drawn through and including suitable size rigid non metalic PVC conduit concealed with all accessories, including suitable size sunkpresses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated unsheathed solid copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point for following

One 5 Amps socket point on independent board

All as per item No.2 here in before but for using 2.5 sqmm copper conductor multi stranded for power points on independent board.

Supply and fix in repairs Integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto 1x22 watts LED tube light. Make Havells Cat No.REGALBATTEN8UPTO1X22WDSBSWH or equivalent in Bajaj/CG

Supply and fix in repairs LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed. Make : Make Havells Cat No.CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make in Bajaj/Crompton Greaves

Supply & fix in repairs ceiling fan 1200 mm sweep including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective ceiling fan and depositing the same to MES store yard complete all as specified and directed. Make Crompton Greaves Model No Briz Air or equivlent make in Baja/Khaitan

Supply & Fix in repairs exhaust fan of 300mm sweep after assembling at site including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective exhaust fan and depositing the same to MES store yard complete all as specified and directed

Supply & fixing in repairs LED 70 Watt building light luminaire, LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.making necessary connection of Make Havells cat No..ENDURAPEARLPLUSSL70WLED757SASYTOPC or equivalent make in Philips / Havells / C&S

Supply & Fixing in reapir Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specefied and directed

Supply and fix in repairs switch piano 5 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 2 in 1, 3 pin, 5 Amps flush type, matching with existing make ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 5 Amps/16 Amp, 5 in 1 flush type, multi purpose, matching with existing make ISI marked, all as specified and directed.

Supply & fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 240 volts 20 Amps all as specified and directed.

M&L in repair for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 2.50 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. [Note :- Necessary cutting and chasing shall be measured and paid separatly under relevant items of this schedule]

M&L in repair for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. [Note :- Necessary cutting and chasing shall be measured and paid separatly under relevant items of this schedule]

Supply and fixing in repairs sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all as specified and directed.

Supply & fixing in repairs of sheet metal enclosure vertical type MCB DB TPN 4 ways double door type including 100 Amps MCCB ,25 KA incomer with suitable bus bar all as specified and directed .

Supply and fixing in repairs amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 6 to 32 Amps current rating complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN upto 32 Amps current rating complete with connection testing and commissioning.

Supply only lamp 18 watts

K.G.SHANKER

KVL CONSTRUCTION

LEKSHMI ENGINEERS

SIRI SALES AND SERVICES

Bidder Name

LEKSHMI ENGINEERS

K.G.SHANKER

KVL CONSTRUCTION

sohan construction

SIRI SALES AND SERVICES