15th FC Chlorinator Retender

Amount

Supplying and Errection of Cholorination Tank

PREPATION TANK & STORAGE TANK

Make: Corrotech.. Type: 300 Litres, Cylindrical Vertical Flat Bottom.Size (IDX Height x Thickness): Standard. Lifting Hook: Suitable lifting device shall be provided on skid.Usable Capacity: 325 Litres (Preparation & Storage).Liquid/Solution to be Handled: Chlorine.Material of Construction: PP (Polypropylene) / LLDPE (Linear Low-Density Polyethylene). Design Pressure: ATM + Full of Liquid.Testing: Leakage Test (Water Fill-Up.

DOSING PUMP / TRANSFER PUMP

Make: Vrito.Model: MMDP-1.Type: Mechanical Diaphragm Type.Offered Capacity: 0-30 LPH. SPM / Ratio: 100 / 15:1. Diaphragm: PTFE (Polytetrafluoroethylene).Flow Control: Manually operated.Turn Down Ratio: 10:1.Pump Standard: Manufacturer’s Standard.Efficiency/Accuracy: 97% / ± 3%.Suction: Flanged Type.Discharge Pressure: 4.0 kg/cm².PRV Set Pressure: 5.0 kg/cm². Connection (Suction): 15 NB.Connection (Discharge): 15 NB.Material of Wetted Parts: PP.

PUMP DRIVE MOTOR

Make: CGL/BBL.Type: Squirrel Cage Induction Motor (IEC Zone- IE2). Supply System: 3-Phase Induction, AC, 415V ±10%, 50Hz ±5%. Mounting/Protection Degree: B3 (Foot Mounted) / IP55.No. of Poles / RPM: 4 Poles / 1440 RPM.Insulation Class / Temp Rise: Class F / Limited to Class B.Method of Cooling: TEFC (Totally Enclosed Fan Cooled).Applicable Standards: IS 325.

MOTOR-PUMPSHAFT COUPLING

Type: Love Joy / Suitable Flexible Coupling.

FLANGES

Fittings (As per ANSI 16.11B) Make: Reputed & Approved ISO 9000 Certified Supplier. Type: 15 NB (SW). Material of Construction: PP (Polypropylene) •Flanges (As per ANSI 16.5 B) Size: 15 NB SWRF #150.Material of Construction: PP / UPVC.Inlet Terminal Flanges / Tank Flanges: 15 NB SWRF #150. Outlet Terminal Flanges / Companion Flanges: 15 NB SWRF #150.

PULSATION DAMPNER

Volume Bottle Type. Capacity: 1.5 Litres.Material of Construction: PP / UPVC

PRESSURE GAUGE WITHI SOLATION VALVE

Type: Bourdon Sensing Type.Mounting: Direct Bottom. Dial Size: 100 mm.Material of Construction: SS (Stainless Steel).Accuracy: ±0.16.Range: 0-14 kg/cm².

NRV(Non-Return Valve) (Vrito)

• Type: Lift Check Type.End Connection: 15 NB SW.Material of Construction: PP / UPVC.

Pressure Relief Valve (PRV) (Vrito)

Type: Spring Loaded.Connection: 15 NB 300#. PRV Set Pressure: 5.0 kg/cm².Material of Construction: PP / UPVC

STRAINER

Filtration Rating: 40 Mesh.Size: 15 NB.Material of Construction: PP / UPVC.

LEVELGUAGE

Type: Transparent Tubular Type.Material of Construction: PP. End Connection: 15 NB 150# Flanged

BALL VALVE (Astral / Finolex / Standard)

Type: Ball Valve for Suction & Discharge.Material of Construction: PP / UPVC. End Connection: SW.Size: 15 NB SW#150

PIPING WITH IN THE SKID

Size / Rating of Pipe: 15 NB Seamless SCH40 / 80.Suction MOC: PP / UPVC.Discharge MOC: PP / UPVC.

GASKETS

Material of Construction: Spiral Wound Gasket CS Outer, Inner SS

FASTNERS

Make: Standard.Material of Construction: MS Galvanized

SKID / BASE FRAME

Base Frame: A common base frame for tank, pump, and lifting lugs. Supports shall be provided. Stool for Pump: Pump shall rest no less than 300 mm.Foundation Bolt: M-12 x 150 mm.Material of Construction: CS (IS: 2062).Primer / Zinc-Rich Epoxy Finish / High-Built Epoxy: Frame shall be painted with 2 coats of epoxy primer and 2 coats of epoxy paint, color – Blue (Standard).

AGITATORwithControlPanel Set

Power: 0.5 HP (1 No)