REPAIR/MAINT OF AREA DRAIN, COMPOUND WALL, GATE AND CERTAIN MISC WORK AT AEC TRG COLLEGE AND CENTRE, PACHMARHI

Amount

Demolition of unreinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down cement plaster on brick or stone surfaces ,walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description or thickness including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good distrurbed ground in concrete complete all as specified and as directed.

Dismantling of fencing wire mesh, any type complete all as specified and as directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in Hard/Dense soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in Hard/Dense soil complete all as specified and directed.

M&L for PCC 1:2:4, B-0 (using 12.5mm graded stone aggregate) as in benching/coping etc complete all as specified and directed.

M&L Cement concrete 1:2:4 type B-1 using 40mm graded aggregate as in surface channels and drains incl necessary form work complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in foundation,filling in and mass concrete complete all as specified and directed

Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc complete all as specified and directed

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4)mixed with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered wall surfaces including brooming down and applying two coat of white washing complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M & L for brickwork with modular size fly ash bricks , straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for providing reinforcement cement concrete Type B1 1:2:4 (Nominal Mix using 20 mm graded stone aggregate) as in columns and pillars etc complete all as specified and directed.

M & L pre-cast RCC cover slab 1:2:4 type B-1 (using 20 mm graded stone aggregate) incl all form work and set in cement mortar 1:4 complete all as specified and directed

S & F mild steel TMT bars 8 to 10 mm dia cut to lenth bent to shape requir including cranking banding spirally and binding with MS wire not less than 0.9 mm dia complete all as specified and as directed.

Supply and fix in repair PVC bends 110mm bore, any radius complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius of 75mm bore , any radius complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Preparation of plastered old decorated wall surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and directed.

M&L for preparation of old cement based surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

S&F as in repair 40 mm dia light density polyethylene pipes (LDPE) of pressurerating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

M&L for precast cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be mearued separately) set in CM 1:4 complete all as specified and as directed.

M & L 20mm thick Granite (of any type)tiles machine cut, in skirting/dado laid over cement screedand jointed with grey cementslurry, and pointed with whitecement with admixture ofpigment to match the shade ofgranite stone including grindingand polishing complete including 10 mm thick plaster in CM 1: 4 complete all as specified and as directed.

Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc complete all as specified and as directed.

Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Preparing old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L painting new steel surface of any description n exc 10cm width or grith including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and as directed.

M&L painting old steel surface of any description n exc 10cm width or grith including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (20mm aggregate) as in bed blocks incl necessary form work complete all as specified and directed.

S&F chain link MS galvanised fencing, 4mm dia wire and size of mesh 100x100mm x 3.15mm including line wires to any type of standered rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire etc completeof any size or type complete all as specified and as directed.

S&F wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessay drilling bolting or riveting etc, and similar work confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L mild steel round bar 10mm dia and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165) complete all as specicifed and directed.

S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut but length of bolt exc. 5cm and n. exc. 10cm long and bolt one side embedded in concrete posts etc complete to fix fencing wire dia of shank11to15mm complete all as specified and directed.

M & L for cutting of bushes small trees ( Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 (12.5 mm graded stone aggregate) / Brick work in CM 1:4 as required at site and complete all as specified and as directed.

Dev Enterprises

DEEPAK JAISWAL

GHASI RAM SAHU