REPAIRS TO WOODEN AND ALUMINIUM JOINERY ALONGWITH CERTAIN REPAIRS TO ROOF, WALL PLASTER AND FLOORING UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR

Amount

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sqm each and crediting to contractor under Sch of credit complete all as specified and as directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and crediting to contractor under Sch of credit all as specified and as directed.

Taking down Shutters of any description n. exceeding 1.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed.

S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S & F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900)and joined together with solvent cement, supplying & fixing in the frame at site as per specification & directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed.

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm size medium weight

S&F in repair Stainless steel butt hinges 100mm size medium weight

S & F Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised all as specified and as directed.

S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete

S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified. NOTE: (i) Unit rate quoted shall deemed to include M&L for rubber beading, fittings such as handles, SS friction stay hinges and fixing only of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately.

Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane.

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed.

S&F in reapir 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing all as specified

S&F in repair Aluminium anodised 'XPM' of size 3.00 x 1.5mm x 22 Gauge for mosquito proofing fixed to aluminum shutters including necessary adjustements, dismantling and re-securing all as specified

S&F in repair Aluminium anodised window and ventilator members for replacement of unserviceable members in window, ventilators etc.

S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc all as directed.

S&F in repair for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet/shelves/wardrobe/wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and directed

S&F in repair heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg all as specified and directed

S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters all as specified and directed

S&F in repairs using plywood, grade BWP, type BB 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and directed.

M&L Decorative laminate 0.9mm thickness sheet type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufactures instructions.

M & L 100mm Extruded brass handles, fabricated type polished all as specified and directed

S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed all as specified and directed.

S & F Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed.

Minor repair to aluminum joinery and making serviceable the same by meance of adjustment, greacing as necessary etc all as specified and directed

S&F mild steel works as in small articles such as hold fast of flat iron 25x3mm bent to shape making holes etc complete.

Cutting holes in brick walls, one brick thick wall in cement mortar for inserting hold fast and making good disturbed portion in CM 1:3 or PCC (1:2:4) type B-1 in all respect all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and as directed.

All as per item No 42 above but two coats of oil emulsion distemper all as specified and directed

All as per item No 42 above but as in ceiling all as specified and directed

M&L for applying a layer of wall care putty on wall and making surface even and smooth complete all as specified and as directed.

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of syanthetic enamel paint all as specified and as directed.

M&L for applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed Note : Rate inclusive of scaffolding as necessary

M&L for applying two coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed Note : Rate inclusive of scaffolding at any height

M&L for preparation of old surfaces of wall and applying one coat of Cement based paint complete all as specified and as directed.

M & L for cleaning the exting floor / Concrete surfaces/Path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algac/organic particles and applying one coat of weather resistant floor paint complete all as specified and as directed. Make - Indigo or make mentioned in PS

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed..

M&L for rendering 15mm thick plaster in CM 1:4 on brick/block wall or concrete surfaces finished even & fair complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.

M&L for applying two coats of cement based paint over a coat of chalk whitning on newly plastered surface of wall including preparation complete all as specified and as directed.

M&L for applying two coats of acrylic emulsion weather coat premium quality antifungal exterior emulsion over a coat of primer on newly plastered surface of wall including preparation all as specified and directed

M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer

M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L Non skid cermic coloured tiles 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM 1:6 all as specified and directed.

All as per item No 62 abov but as in vertical surfaces/skirting/daddo over and including 10mm thick backing coat in CM 1:4 all as specified and directed .

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified and directed

M&L for glazed ceramic coloured tiles (light shade) of size 300x200x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 all as specified and directed .

S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 all as specified and directed .

M & L For coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in cm 1:6 etc. complete all as specified and directed.

M & L for 300 x 300 x 10mm thick coloured heavy duty vitrified exterier chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and as directed.

M&L for 20 mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over screed bed incl pointing in white cement with admixture of pigment to match with shade of granite stone incl grinding and polishing over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified and directed

S&F in repairs aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F Rolled sections / Tubular MS pipes as in cross beams, hip and jack rafters, vertical posts, purlins where connected to commonn rafters fixed with angle cleats or other connecting plates including welding and all necessery works Fe-410-W (Gde-E-250) complete all as specified and directed

S&F in repair Pre-laminated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions including dismantling all as specified and directed

All as per item No 74 above but plain steel sheet as in ridges and vally gutters all as specified and directed

S&F in repair Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting all as specified and directed .

Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length all as specified and directed

S&F in repair for 3mm thick PVC laminated sheet fixed in position with all fixing arrangements as directed by Engr-in-Charge

S&F 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed.

S&F in repair decorative globes for curtain rails to be fixed at both end all as specified and directed

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, aluminum extruded body suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed

BISAKHA PLUMBING WORKS

KRISHNA TRADING COMPANY

Kathir Marketing Services