REPAIR ROUTINE MAINT OF 04 NOS ELECTRIC LIFTS MAKE ECE IN G 3 G 14 STOREY BUILDING AT NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Repairs/ maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door simplex, collective control system with repair/maintenance of unserviceable damaged parts such as bearings bushes all type of shoes, headers, hangers, car door, door locks, control cards, connector/ links, welding of cracked/ broken MS parts, Repairs/ maintenance of unserviceable damaged door safety edge or sensor mechanical safety lock, magnetic lock or contact, car position indicator, door sill, car door sill necessary wiring hall push button assembly, Landing Operating Panel of any Size and capacity including all connected Accessories, complete with illuminated push button & direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for luminating of push button of each floors and cutting of wall, making good distrubed surface with masonary work to make with existing surface & cable as per requirement or safe operation of lifts, minor repair to cabin, cabin light, fan etc ensuring safety and smooth functioning of lift and disconnecting and repairs/ maintenance of unserviceable/ worn out parts such as worm wheel, worm shaft bushes, thrust bearing and pedestal bearing and necessary packing including overhauling, cleaning alignment of gear box assembly and after Repairs/replacement of wornout parts re-assembly and fixing with existing machine with proper alignment complete maintenance of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing complete all as specified and directed. Note : - One mechanic shall be available at the lift complaint cell for safe & smooth functioning of the lift and to carry-out rescue operation.

13 Ps (884 Kg) capacity in RIS bldg (G+3) (Total 01 lift).

13 Ps (884 Kg) capacity in R-16 bldg (G+14) (Total 01 lift).

Goods Lift ( 2000 Kg) Capacity in Bldg No R-8, R-9 ( G+14 Storey) ( Total 02 Nos Lift)

Disconnecting and taking out unserviceable COP assembly for G+3/G+14 storey building, supply and fixing new car operating panel assembly completed with illuminated push button for floor position alarm, non stop door open , door close, cabin fan, cabin light stop, attend out key etc with direction indicator,with LED display with CPI card of stainless steel face plate in and including necessary wiring for laminating push button of each floors and cutting wall, making good disturbed surface with machinary work to complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair cabin fan from car cabin, non-oscillating type, axial flow, single speed 300mm sweep, 240 volts ISI marked with grill complete all as specified and directed.

Supply and fixing in repair of automatic door drive unit with motor on car top with VVVF of 1 HP capaicity complete all as specified and directed. Make : Yasakava / Sneider complete all as specified and directed.

Dismantling and taking out unserviceable safety edge of any type & supply and fixing new full beam infrared sensor upto full length of car doors (2.00 mtr) complete all as specified and directed.

Supply and fixing in repair Emergency alarm with complete accessories including rechargeable batteries alongwith box including connecting cables for G+14 storey building all as specified and directed by Engineer-in-Charge.

Dismantling and taking out unserviceable old landing push button box along with illuminated call button with control wiring and supply & fixing landing push button box along with illuminated call button with control wiring for G+14 storey building complete all as directed by Engineer-in-Charge.

Taking down old unserviceable Announcement system and supply and installing, testing and commissioning of MP3 voice announcement system in the controller and high quality speaker on car top, with necessery provision of shaft wires and travelling cable complete as specified. The audio indicator shall announce floor position, ARD made operation, overload announcement etc and continious mild music in hindi and can be programmable for more music. The announcement system shall be in hindi and english.

Disconnecting and taking out defective dynamic breaking resistence from controller and supply and fixing new aluminium covered wire wound dynamic breaking resistor to absorb the reverse energy dissipation of motor during regeneration in control operation suitable for 11.0 kW/ 15HP motor.

Dismantling and taking out unserviceable old control panel and control wiring and supply and fixing new CAN BAS Integrated Drive based collective control panel in hinged MS powder coated cabinet with control wiring comprising with multiple microcontrolled programmed chip based controlled by pulse modulation, complete with all safties such as thermal overload protection, over current protection, auto phase reverse link to each other in net work and compitable to 18 KW /24HP capacity VVVF drive including proper connection with proper lugs, terminal connectors screws and motor connection with galvanised sheet trunking 24 SWG including wiring of main motor with suitable size of stranded copper cable etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs sealed maintenance free batteries ( Set of Four) each of 12 volts, 18 AH ( Five year maintenance free) Make :- Exide/Amaron

Taking down old unserviceable OSG Pulley from the position and supply and fixing New OSG Pulley both top and bottom for 8 & 13 Ps Lift as specified and directed by Engr-in-Charge.

Disconnecting and taking out old/unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanished sheet metal trunking of 24 SWG up to ground floor in hoist for control to all functions including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge. for G+14 Storey building.

Supply & fixing in repairs unserviceable ARD control system and commissioning and testing of new ARD system suitable for upto 11 KW motor including wiring with connected items in existing G+14 Storey building 08/13 Passenger lifts 415V, 50 Hz, 3 phase with a speed of 1.2 m /sec comprising with maintenance free battery 12 V, 18 AH (04 Nos five year Maintenance free battery, Make Exide/Amaron) to match with the existing capacity motor and controller system complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old/unserviceable Governer rope of size 8 mm dia (8/19 Construction) ungalvanised including necessary connection with pulley in machine room and shaft pit complete with clamps, nuts, bolts, and washers etc, for high rise building for 8/13/Goods lifts complete all as specified and directed by Engr-in-Charge. Make :- Usha Martin

Veer High Tech Solution (BID ID -3466442)

Monarch Enterprises (BID ID -3467762)

Escon Elevators Pvt Ltd (BID ID -3468311)

Shree Elevator Engineering Co. (BID ID -3468588)