CWE/FZR-40/2023-24 Provn of overhead shed with stone set hard standing for 02 x ARV(WZT-3) near bldg No P-90 of Fd Wksp Coy EME under GE(West) Fzr Cantt

Amount

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cespits, manholes, pier holes etc n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning filling in layers including leveling watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed by Engineer-in-Charge.

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Use & waste of formwork to sides of concrete foundations,footings,bases or column,raft and raft beams,sides and soffits if any of foundations and plinth beams and similar work,vertical or batter etc rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.

Use & waste of formwork to sides of pillars,posts,struts,piers,columns and stanchions ect fair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Use & waste of formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for RCC(1:1.5:3) type B1 20mm graded stone aggregate as in foundations including rafts,footings,foundations beams ,bases of column etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for RCC(1:1.5:3) type B1 20mm graded stone aggregate as in columns,pillers,piers,posts and structs etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for RCC(1:1.5:3) type B1 20mm graded stone aggregate as in beams,cantilevers,bressummers,lintels over 1.5 m span complete all as specified and as directed by Engineer-in-Charge.

Material and labour for TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per item No 13 above but 5 mm dia and over upto and including 10 mm dia in stirrups spaces and binders complete all as specified and as directed by Engineer-in-Charge.

Material and labour15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour10mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Rolling and cosolidating formation surface in cuttings with power roller 8/12 tonne capacity complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100mm hard core of broken bricks gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and ramed to a true surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in sub base for floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 150mm thick cement concrete Type B2 1:2:4(40mm graded aggregate) as in flooring complete all as specified and as directed by Engineer-in-Charge.

Material and labour for stone set flooring with stone sets of size 200 to 250 mm long,150 to 200mm wide and 150mm deep and sides dressed,bedded in cement mortar 1:3,joints 20mm thick,grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and as directed by Engineer-in-Charge.

Material and labour for edge stones to flooring with stone setts of size 250 to 300 mm long x 150 to 200 mm wide,and 450 mm deep and sides dressed,bedded in cement mortar 1:3,joints 20mm thick,grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Mild steel plates(plain or chequered) channels,square cut or notched(ordinary and counter sunk) forming holes,without any attachment and fixing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other,or screwed bolt ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5 cm long and n.exc 10 cm long and dia of shank 11 to 15 mm etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick hard core gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and ramed to a true surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Material and labourPreparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches/bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for One light/fan/Bell Point controlled by one single pole one way switch.

Ditto all as per Item No 33 above but one 3 pin socket outlet 5 Amp on the same board controlled by one single pole one way switch

Ditto all as per Item No 33 above but one 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

Ditto all as per Item No 33 above but but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply and fixing Switch piano flush type 6 amps, one way complete all as specified and directed.

Supply and fixing Switch piano flush type 16 amps, one way complete all as specified and directed.

Supply and fixing Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed.

Supply and fixing Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and directed.

Supply and fixing ceiling rose surface type, PVC/polycarbonate, isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and as directed by Engineer-in-Charge

S&F sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge

S&F MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and as directed by Engineer-in-Charge

Supply & Fixing MCB single pole (SP) 240 volts, 6-32 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge

Supply & Fixing LED tube light fitting 18/20 Watts,4 feet long decorative ultra slim linear LED lighting fixture (White/Warm white) with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge

Ms Hari Singh

M/s Sarup Singh

M/S KRISHNA ENTERPRISES

B.L. Chaudhri and Co.