SPECIAL REPAIRS TO KOTE BLDG AT AVA HILL OF MRC AND CERTAIN REVENUE WORK UNDER GE WELLINGTON

Amount

Demolition of cement Concrete of any description and in any position including padding concrete all as specified and directed.

50mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregates average as in levelling / padding course on roof slab, projections on similar surfaces existing with slope, making the surface even and smooth without using extra cement, including using liquid water proofing compound all as specified and directed. Note: Supply of integral water proofing compound will be measured and paid seperately.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green at any height and making the surface fair and even without using extra cement including using liquid integral WPC as per manufacturer instructions complete all as specified and directed. Note: Supply of integral water proofing compound will be measured and paid seperately.

Supply only liquid water proofing compound all as specified and directed.

APP modified prefabricated polymeric membrane, 3mm thick and weighing not less than 3.6 Kg / Sqm reinforced with non woven polyster / HMHDPE matt black finished over compatible primer @ 0.10 Ltr / Sqm having softening point not less than 300N / Sqcm, side lap & end lap 15cm, over a coat of bitumen primer @ of 1.2 Kg / Sqm and finishing with aluminium paint applied @ of 0.10 Kg/ Sqm & finished all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface, or stone masonary finished even and smooth without using extra cement all as specified and directed

Rendering 15mm thick in cement mortar 1:4 on other than fair faces of stone masonary surface using water proofing compound finished even and smooth without using extra cement all as specified and directed Note: Water proofing compound will be measured and paid seperately.

Rendering 5mm thick in cement mortar 1:3 as in ceiling surfaces including finishing the surfaces even and smooth complete all as specified and directed

Preparation of new plastered surface of wall and applying two coats of apex ultima (Anti fungal) over a coat of primer including surfaces complete all as specified and directed

Preparation of old plastered surface of wall and applying two coats of apex ultima paint (Anti fungal) or equivalent complete all as specified and directed.

Preparation of new surfaces of wall and applying three coats of white washing complete all as specified and directed.

Applying two coats of white wash on old surfaces of wall and including preparation of wall all as specified and directed.

Preparation of new surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

Applying two coats of white wash on old surfaces of ceiling and including preparation of ceiling all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Demolition of cement Concrete unreinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

75mm thick plain Cement concrete , 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection / path all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded stone aggregate in surface channels and drain complete all as specified and directed

Forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc all as specified and directed

Screed bed or bed-ding layer of mortar 15mm thick cement mortar 1:4 for laying floor finishes all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor 75mm thick all as specified and directed.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out as in hard/ dense soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq m on plan and getting out in hard / dense soil complete all as speicified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/ dense soil complete all as specified and directed

Removing excavated soil/ material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Pre-cast cement concrete block masonry with solid block exceeding 10cm in width and setting in mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Rendering 10 mm thick in cement mortar 1:6 with WPC on concrete surfaces or brick surfaces, finished even and smooth without using extra cement all as specified and directed. Note: WPC will be measured and paid separately.

Applying two coats of cement based paint over one coat of white wash on new plastered surface including preparation all as specified and directed.

Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) in lintel upto 1.5m clear span, benching, coping etc including necessary formwork all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 100mm thick all as specified and directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in sub base 25mm thick all as specified and directed.

Screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work in vertical surfces all as specified and directed.

Glazed coloured ceramic tiles in vertical surface of size 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed.

100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Aluminium handles, cast type, anodised 100 mm long complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap and flushing pipe, anti syphonage pipe, etc. complete including making good to floor all as specified and directed.

PVC low level flushing cistern 10 lts capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including brackets complete all as specified and directed.

PVC connections 15mm size with PTMT nuts and washer on both ends of length 450mm all as specified and directed.

GI tubes 15mm bore medium grade with all fittings and laid in floor/ wall/ ceiling etc complete all as specified and directed.

75mm dia PVC (SWR) floor trap/ Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed

Plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Rolled mild steel work with Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete conforming to Fe290 (Gde E-165) all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

75mm thick Cement concrete type C-2, 1:3:6, using 40 mm graded stone aggregate as in sub-base finished even and rough to receive the top layer all as specified and directed.

40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in floor finished even and smooth without using extra cement,complete all as specified and directed.

Cutting holes not exceeding 150Sqcm through brick/stone walls made in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (each cut measured) all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.

Bib tap 15mm bore fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure screwed for iron pipe and fixed all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 all as specified and directed.

Vitreous china wash hand basin, white flat back size 550 X 400 mm excluding taps, waste, chain and plug and procelain stopper but including brackets waste pipe, CP waste coupling etc complete all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

Stop valves 15mm dia bore, cast copper alloy screwed down high pressure fancy type, chromium plated screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

CP Towel rail 600mm long fixed with and including chromium plated brass screws and wooden / plastic cleats fixed on walls, complete all as specified and directed.

50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm² fixed complete to walls, ceilings or in floors etc all as specified and directed.

PVC bathroom cabinet made out of ABS matrial of size 45 x 60 cm all as specified and directed. Make: Prayag or equivalent as approved by GE

Taking down aluminium/ copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC concealed / surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/ Ex-fan point controlled by one 5Amps one way switch all as specified and directed. Note: Cutting chasing of wall / floor will be measured and paid separately.

All as per Item No 78 hereinbefore but One 5A 2pin/3pin switch socket outlet multipurpose on independent Board all as specified and directed.

All as per Item No 78 hereinbefore but One 5A switch socket outlet on same board all as specified and directed.

All as per Item No 78 hereinbefore but wiring complete with 2.5 Sqmm for 3 pin 15A socket outlet multipurpose on independent board all as specified and directed.

Switch socket combination 2 in 1, 5 Amps multipurpose flush type all as specified and directed.

Switch socket outlet multipurpose 3 pin, 15amps and one pin, 5 amps controlled by one switch all as specified and directed.

Socket outlet 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

Switch flush type 5 Amps SP, one way all as specified and directed.

Ceiling rose, 3 terminals PVC/ polycarbonate, isolated body all as specified and directed.

Wall mounted 18W LED (4ft) batten with decorative end caps electronic driver, lamp color white all as specified and directed. Make : Crompton Cat No LCTL-18-CDL or equivalent in Philips / Bajaj / Havells.

Energy saving 25W LED building security light with pressure die cast aluminium IP 66 housing including necessary accessories and GI pipe/ Bracket required size length 1.5 mtr all as specified and directed. Make : Crompton Cat No LSTS-25-CDL-1 or equivalent in Philips / Bajaj / Havells.

Taking down Submain wiring 2 x 4 Sqmm PVC insulated aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Taking down Submain wiring 2 x 2.5 Sqmm PVC insulated aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 2.5 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Taking down old wooden board with MCB DB TPN including any type MCB'S and rfixing the MCB DB TPN including any type MCBs in new teak wood board of size 60x45cm including disconnecting and reconnecting the existing wiring all as specified and directed.

Taking down old MCB/DB and supply and fix distribution board sheet steel phosphatised powder coated for MCB/ DB with copper bus bar and neutal link earthing stud 9confirming to IS-13032, IS-8623) SPN 4 way 240 volts double door all as specified and directed. Make : Legrand / L&T/ Havells.

MCB SP 6-32 Amps, 240 Volts, 50 Hz AC supply complete all as specified and directed.

MCB SPN 6-32 Amps, 240 volts, 50Hz AC supply complete all as specified and durected.

Earthing complete with galvanised steel earth plate electrode 60x60x6mm thick buried directly in ground, earth pit not less than 2.25 mtr deeep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts, hook nuts and washers of galvanised steel all as shown in electrical plate no 3 of SSR Part I connected to earthing testing point all as specified or indicated including testing on completion.

Cutting chases in stone masonry wall / concrete floor /roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good cutting not exceeding 10cm girth all as specifed and directed.

Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (Junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, clamps etc all as specified and directed.

Sand cushioning to underground cable provided with layers of dry clean sand 8cm thick before laying the cable in trenches and 15cm thick after laying and stretching of underground electric cable complete all as specified and directed. Note: Punned thickness only shall be measured and paid.

Supply and lay in trenches burnt brick, old size, sub class "B" for cable protection all as specified and directed.

Supplying, laying and testing XLPE cable insulated screened PVC bedded glavanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with standed aluminium conductor of size 4 core 16 sqmm all as specified and directed.

Supply and lay GI pipe light grade of size 40mm dia for cable protection in trenches/ floor, fixed on pole/wall etc all as specified and directed.

sree devi construction