REPAIR TO JOINERY SANITARY FITTINGS FLOORING PLUMBING CEILLING PERIODICAL SERVICES AND INTERNAL ELECTRIFICATION INLCUDING DAY TO DAY MAINT AT 2ND 3RD 4TH 5TH FLOOR AND TERRACE OF COMD HOSP UNDER GE P CH CHANDIMANDIR

Amount

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm complete all as directed.

Coloured Vitrified ceramic tiles digital 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed

All as per item No 02 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match including 10 mm thick screed bed or bedding layers in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar complete all as specified and as directed.

Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and as directed.

Baroda green marble work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed.

Non skid coloured cermaic tiles 300x300x7mm thick as in floor patches (area n exc 1 Sqm ) set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in CM (1:6) including dismantling and removing old tiles from outside of premises etc complete all as specified and directed.

Non skid coloured cermaic tiles 400x400x7mm thick as in floor patches (area n exc 1 Sqm) set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in CM (1:6) including dismantling and removing old tiles from outside of premises etc complete all as specified and directed.

Coloured Vitrified ceramic tiles 600x600x9mm thick as in floor patches (area n exc 1 Sqm) set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in CM (1:6) including dismantling and removing old tiles from outside of premises etc complete all as specified and directed.

Glazed coloured cermaic tiles (300x450mm)x6-7mm thick as in vertical surfaces of walls in patches (area n exc 1 Sqm each) set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in CM 1:4 including dismantling and removing old tiles from outside of premises etc complete all as specified and directed.

Glazed coloured cermaic tiles (300x200mm)x6-7mm thick as in vertical surfaces of walls in patches (area n exc 1.0 Sqm each) set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in CM 1:4 including dismantling and removing old tiles from outside of premises etc complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and directed. Note : Rate also includes labour and material cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engineer-in-Charge

All as per item No 14 above but exc. 1.5 Sqm and n. exc 4 Sqm each completed all as specified and as directed.

Taking down shutter of any description n exc 1 sqm each completed all as specified and as directed.

Taking down shutter of any description exc 1 sqm but nexc 2 sqm each completed all as specified and as directed.

Taking down shutter of any description exc 2 sqm each completed all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out shash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick single piece extruded PVC profile on the front face & 2mm plain coloured single piece extruded PVC profile on back face etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

100mm butt hinges, extruded brass with brass hinge pin bright polished and fixed etc complete all as specified and directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed.

Mortice lock brass 4 levers, vertical type 100 mm, fixed in repairs, complete all as specified and as directed.

Powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc fixed in repairs, completed all as specified and as directed.

Brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc, fixed in repairs, completed all as specified and as directed.

Floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc, fixed in repairs, complete all as specified and as directed.

Aluminum (extruded section body) door closer hydraulically regulated, universal type suitable for door 61 to 80 Kg, fixed in repairs, of approved make complete all as specified and as directed.

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc completed all as specified and as directed. (Thickness of section not less than 3.00MM)

Powder coated aluminium door shutters partly glazed and partly panelled, (thickness of powder coating not less than 50 microns) made out of hollow extruded aluminium sections of size not less than 100mmx44-45mmx2mm for top rail, 83mm x 44-45mm x 2mm for vertical siles & 150mmx44mmx2mm for bottom/middle rail with & including 5.5mm thick tinted glass/ 12mm thick prelaminated particle board/stainless steel wire cloth and necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and as directed. Each door shall be having 2 Nos American handles, 2 Nos 200mm long aluminium tower bolts, aluminum hinges, 1 No 6 lever brass mortice lock cost of which shall deemed to be included in unit quoted rate.

Powder coated aluminium window/ventilator shutters (thickness of powder coating not less than 50 micron), made out of hollow extruded aluminium sections of size not less than 83mmx44-45mmx2mm, fixed to frame including necessary joining cleats, glazing clips, rubber packing, screws, anodised aluminum fittings such as snap beading, lock type handle of size 75mm, 02 Nos 150mm long aluminium tower bolts, 02 Nos 100mm Hinges (per leaf) with & including glass/ wire cloth etc complete all as specified and as directed.

5.5mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed.

All as per item No 35 above but exc 0.50 sqm in each pane.

0.56mm thick plain aluminium sheeting as in ridges, hips, valley gutter, drip and straight flashing etc, fixed in repairs, complete all as specified and directed.

Dismantling of wooden boarding of any description and fixed in any position with screws etc complete all as directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side with white lamination as in cupboard side box,cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and directed.

9mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked ( IS: 12853) fixed as panels in aluminium joinery etc in repair complete all as specified and directed.

Preparation of new wood surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old wood surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc completed all as specified and as directed.

Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying two coats of oil emulsion distemper etc complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying two coats of oil emulsion distemper etc complete all as specified and directed.

Complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer and a coat of Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

Complete removal of old treated surfaces on wall and applying one coat of alkali resistant primer and a coat of Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of plastic emulsion paint etc complete all as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.

Mineral fibre acoustical suspended ceiling system with Sierra Microlook 90 Edge tiles of size 600x600x13mm with Suprafine 15mm exposed grid incl anchor fasterner with hanger hole, pre straightened hanger wire of dia 2.5mm alongwith adjustable hook clips, etc and laid as per manufacturer instruction all as specified and directed by Engr-in-charge. MAKE- Armstrong/Durlum/Lindner

Designer ceiling boards of size 595mm x 595mm x 4-6mm thick placed in existing false ceiling grid made of aluminium /GI/MS including grid repair/repalced as per manufacturers instruction etc, fixed in repairs, complete all as specified and directed.

25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

Welding in repairs exc 2.5cm but n. exc 5 cm in length & n. exc. 6mm thickness of metal to be welded complete all as directed.

Preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.

1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc, fixed in repairs, complete all as directed.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers completed all as specified and as directed.

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc completed all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth completed all as specified and as directed.

Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc, fixed in repairs, complete all as specified and as directed.

15mm bore brass CP fancy Type center hole basin mixer for mixing hot & cold water screwed down for iron fixed etc, fixed in repairs, complete all as specified and directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions, fixed in repairs, complete all as specified and directed.

Waste fitting (brass, chromium plated) of any size for sinks, wash basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed etc, fixed in repairs, complete all as specified and as directed.

PVC waste pipe 32/40mm dia etc, fixed in repairs, complete all as specified and as directed.

Ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe, fixed in repairs, complete all as specified and as directed. For low level flushing cistern.

Cast iron sand soil waste or vent pipes 100 mm bore in any length with or without ears with cement joints laid in trenches, floors or fixed to walls, fixed in repairs, complete all as specified and as directed.

All as per Ser Item No 70 above but 75 mm bore.

Cast iron bends 100 mm bore (any radius) diminishing pieces or tapers (larger bore measured), fixed in repairs, completed all as specified and as directed.

All as per Srl Item No 72 above but 75 mm bore of pipe

CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe, fixed in repairs, complete all as specified and as directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts incl making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete etc, fixed in repairs, complete all as specified and as directed.

Elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm, fixed in repairs, complete all as specified and as directed.

CP Toilet paper holder, fixed with CP brass screws etc, Fixed in repairs, complete all as specified and as directed.

Viterous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap, front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and connections to flushing cistern/pipe and making good disturbed portion to match existing surface etc, fixed in repairs, completed all as specified and as directed.

Flush pipe PVC for low level flushing cistern including jointing to WC, fixed in repairs completed all as specified and as directed. ( Make : as per sample)

Vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device, fixed in repairs complete all as specified and directed.

Plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device etc, fixed in repairs, complete all as specified and directed.

Vitreous china wash basin white flat back size 550 mm x 400mm incl all fittings incl cutting for and pinning in ends of brackets or erecting stand etc, fixed in repairs, complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate)

Fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc, fixed in repairs, complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc completed all as specified and as directed.

PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe, fixed in repairs, complete all as specified and as directed.

PVC syphone with handle complete for low level flushing cistern, fixed in repairs, complete all as specified and as directed.

110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/fixed to walls etc, fixed in repairs, complete all as specified and directed

All as per item no 88 above but 75mm dia PVC (SWR) pipes

110 mm dia PVC (SWR) bends of any radius complete all as specified and directed

75 mm dia PVC (SWR) bends of any radius complete all as specified and directed

Grating CP 110 mm dia etc, fixed in repairs, complete all as specified and as directed.

15 mm dia 450/600 mm long PVC connection pipe with 02 Nos nut at each ends with rubber washer etc, fixed in repairs, complete all as specified and directed.

Repairs fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.

75mm dia cast iron nahani trap/floor trap, with stainless steel grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including taking out old floor trap

Brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc, fixed in repairs, complete all as specified and as directed.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for the following Make of cable : Plaza/Finolex/Havells/polycab/KEI

One light point controlled by one switch/ one fan point controlled by one switch & fan regulator.

One socket outlet three pin, 5 Amps on the same board.

One socket outlet three pin, 5 Amps, independent.

One light point controlled by one bell push.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells/polycab/KEI

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells/polycab/KEI

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC caping and casing with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and sheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified Make of cable : Plaza/Finolex/Havells/polycab/KEI

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and caping with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells/polycab/KEI

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor/ABB

Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed. Make : Make :SSK/Legrand/Anchor/ABB

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make :SSK/Legrand/Anchor/ABB

Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. Make :SSK/ Legrand/Anchor/ABB

Switch modular type single pole one module, 6 Amps complete all as speciifed.Make :SSK/Legrand/Anchor/ABB

Switch modular type single pole one module, 16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor/ABB

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make :SSK/ Legrand/ Anchor/ABB

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make :SSK/Legrand/ Anchor/ABB

Modular bell push single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/ Anchor/ABB

Modular blank plate one module.

Modular fan step regulator 120 watts for 48"/56" sweep ceiling fan 1 module complete all as specified.

Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified. Make : CONA/ANCHOR/LEGRAND.

Supply and fixing in replacement LED battern made out of CRCA MS sheet/ alumunium, 4 feet long ,box with miniumu depth of 25mm with front openable cover both side connection arrangement suitable for rertrofit led tube complete all as specified and directed.Make : Halonix/Crompton/Anchor Panasonic/ Havells

Supply fixing in replacement Retrofit LED tube light 18/20 watt minimum lumens 1980 of 4 feet size with adjsutable holder with back spring with aluminium housing heat shrink both end connection. Make : Halonix/Crompton/Anchor Panasonic

Supply and fixing in replacement Deep type recess mounted LED 36 watt Luminaire equiped with CRCA powder coating housing , antiglare diffuser with separate energy electronic driver of capacity 36 Watt minimum, 5700 K , 595mmX595mmX75mm dimensions, including fixing arrangement with existing complete all as specified and directed. Make : Pansonic/Halonix/C&S/Crompton

Supply and fixing in replacement Indoor decorative LED battern with milky diffuser including 8 - 10 Watt 5700K LED strip including driver ,accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation complete all as specified and directed .Make : C&S/ Halonix/Panasonic/ havells

Supply fix in replacement of surface/recess mounted slim square type led panel with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 10 watt LED panel light,3000k,having dimension 120mmX120mmX35mm and making connection accessories complete all as specified and directed. Make : C&S/ Halonix/Panasonic/ havells

LED Luminaire 42 Watt, 6500 K suitable for armstorng/grid cealling/surface mounting, with its super bright LED, 2X2 GRID CEILING,including 42 watt LED strip recess mounted complete with drivers and others accessories as per manufactures recommendation complete including fixing arrengement with existing including taking down existing complete all as specified and directed. Make : Hallonix/ Panasonic/ C&S

Decorative wall mounted Bed side light including 5 watt LED bulb/strip Lamp of size: 13.4 cm x 12.4 cm x 8.2 cm Lamp Material: Metal, Synthetic, Color: White including taking down existing complete all as specified Make : Philips/ Wipro/Hallonix/ Crompton/Bajaj /Anchor Panasonic/HPL

Replacement of surface/ recess mounted circular LED down lighter with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 15 Watt LED down light,6000k, and making connection accessories complete all as specified and directed.Make : Panasonic/Halonix/C&S/ Havells

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etccompleted all as specified and as directed.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits with following size Notes: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: FINOLEX/RPG/PLAZA./Havells.

2 run of 6 Sqmm cable + 1 run of 6Sqmm

2 run of 4 Sqmm cable + 1 run of 4Sqmm

25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces including painting of wall matching with exisiting colour after concealing the conduit in wall all as specified.

Taking down carefully opper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified.

MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 12 way, fixed in repairs, all as specified. Make : Legrand / C&S/Havells/ABB/Indoasian.

MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way including taking down existing complete all as specified and directed. Make : ABB/Hager/Legrand/ABB/Indoasian/Havells.

MCB SPN, 'B' series. 10 KA, 240 Volts 40 Amps capacity, fixed in repairs, Complete all as specified and as directed. Make : Legrand/ C&S/Siemens/Hager

MCB SP, 'B' series. 10 KA, 240 Volts, 40 Amps capacity, fixed in repairs, Complete all as specified and as directed. Make : Legrand/C&S/ Siemens/Hager.

MCB SP, 'B' series. 10 KA, 240 Volts, 6-32 Amps capacity, fixed in repairs Complete all as specified and as directed. Make : Legrand/C&S/ Siemens/Hager.

MCB TPN , 'B' series. 10 KA, 240 Volts, 63 Amps capacity, fixed in repairs, Complete all as specified and as directed. Make : Legrand/C&S/ Siemens/Havells/Hager.

Flush type single pole, one way 5 Amps switchs 240 volts, fixed in repairs, Complete all as specified and as directed.

Socket outlet 2-in-1,3 pin, 5 Amps flush type, fixed in repairs, Complete all as specified and as directed.

Flush type single pole, one way 15 Amps switch 240 volts, fixed in repairs, Complete all as specified and as directed.

Socket outlet 2-in-1, 3 pin, 5 and 15 Amps flush type, fixed in repairs, Complete all as specified and as directed.

Multipurpose 16 Amps combination PVC Gang box of size 7" x 4" including one switch and socket of 16 Amps, fixed in repairs, complete all as specified and directed. Make : /Anchor/SSK/ABB/Kingal

Multipurpose 6 Amps combination PVC Gang box of suitable size including one switch and socket of 6 Amps, fixed in repairs, complete all as specified and directed. Make : Kingel/Anchor/SSK/ABB

Switch modular type single pole one module, 6 Amps fixed in repairs, Complete all as specified and as directed. Make :SSK/Legrand/Anchor/ABB/Kingal.

Switch modular type single pole one module, 16 Amps fixed in repairs, Complete all as specified and as directed. Make :SSK/Legrand/Anchor/ABB/Kingal.

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps fixed in repairs, Complete all as specified and as directed. Make :SSK/Legrand/Anchor/ABB/Kingal.

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps fixed in repairs, Complete all as specified and as directed. Make :SSK/Legrand/Anchor/ABB/Kingal.

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor/ABB/Kingal.

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module fixed in repairs, Complete all as specified and as directed. Make :SSK/Legrand/Anchor/ABB/Kingal.

Caping casing 20/40/25 mm as per requirement of sight any ISI marked Complete all as specified and as directed.

Electronic driver of 36 watt,2.5 KV search protection as per existing in site suitable of LED Ceilling light 2X2 ,1X 4 ft , input suppply 140V -270V and output 12 Volt DC, complete all as specified and as directed. Make : Crompton/Hallonix/Panasonic/CNS.

Sheet metal enclosure Two way , two module ,IP30 degree portection enclosure for 32 Amp MCB DP complete all as specified and directed. Make : Hager/Legrand/ Hensel/ABB/ Havells/Indiasian/ CNS

Plug and socket outlet (with industrial plug and socket ) with provision to mount MCBs 20 A including 20A SP MCB , B series , 1 module , IP 30 degree protection complete all as specified and directed . Make : Hager/Legrand/ Hensel/ABB/ Havells/Indiasian/ CNS

VTPN DB 4-ways, IP 43 - IK 09 with metal door (DPX3 160+12) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall, fixed in repairs, complete all as specified and directed. Make : Legrand / Siemen/Hager/C&S/ABB/Benlo

TPN DB , 4 Way (4+12 modules) double door , IP43 degree protection fixed in repairs, Complete all as specified and as directed. Make : Hager/ Legrand/ C&S/ ABB/ Indoasian

VTPN DB 12-ways, IP 43 - IK 09 with metal door (DPX3 250+36) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall, fixed in repairs, Complete all as specified and as directed. Make : Legrand / Siemen/ Hager/ C &S/ABB/Indoasian.

MCCB 160 Amps 3 pole 415 volts 25 kA Ics=75% Icu including extended terminals complete all as specified and directed.Make: Legrand / Siemen/Hager/ C&S/ABB

MCCB 250 Amps 4 pole 415 volts 36 kA Ics=75% Icu including extended terminals complete all as specified and directed.Make: Legrand / Siemen/ Hager/C&S/ABB

Earhting complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvenised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 05 connected to earthing test point all as specified or indicated including testing on completion.

Supply, install testing and commissioning of Automatic transfer switch (ATS) of capacity three phase 415 Volt, 50Hz, 4 pole and 160 Amp having suitable to 02 incoming and one out going with inbuilt time delay. The ATS should be capable of transfering load of first feeder to second feeder on failure of first feeder and wise versa automatically. the switch should have provision for automatic operation as well as manual operation and should be able for wall mounted including sheet metal enclouser with extrended terminal if required easy fixing of incoming and outgoing connection with free maint of work. Make: Havells/ Legrand/Hager

Supply, install testing and commissioning of Automatic transfer switch (ATS) of capacity three phase 415 Volt, 50Hz, 4 pole and 100 Amp having suitable to 02 incoming and one out going with inbuilt time delay. The ATS should be capable of transfering load of first feeder to second feeder on failure of first feeder and wise versa automatically. the switch should have provision for automatic operation as well as manual operation and should be able for wall mounted including sheet metal enclouser with extrended terminal if required easy fixing of incoming and outgoing connection with free maint of work. Make: Havells/ Legrand/Hager

m/s krishna engineers1

chahalbuilders