Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
8 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document- 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any signaling work involving trenching, cable laying, termination and outdoor wiring. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
31 conditions · 14 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Sectional Signal Maintenance Contract (SSMC) for the sections of DSTE/FZR for one year.
433-Sig-T-03-26-27
433-Sig-T-03-26-27
Open
Works - General
12 Months
Firozpur, Punjab
₹0
₹3.0 L
8 May 2026
13 Apr 2026
24 Apr 2026
131 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 40,48,644.69 | ||
| — | 400.00 | — | — | ||
| Supply of Signal No. Plates as per Drg. No. RST -11393. Inspection: Consignee. | — | — | — | 2,03,392 | |
| — | 500.00 | — | — | ||
| Supply of Insulation for 'L' type bracket for point fitting IRS type as per drg. No. SA- 8800-01(Adv.) or latest complete consisting of insulation rail joint splice plate - 01 No. conforming to drg. no. S-8804 Nylon Type-66 as per IRS-S-40/84 with latest amendment, Ferule - 02 Nos. conforming to drg. no. S-8813 as per spcn. no. IRS:S-40/84 material nylon type-66, washer - 04 Nos. conforming to RDSO drg. no. T-10371 ALT-2 IRS-40/84 nylon type-66. (Inspected by Consignee) | — | — | — | 16,310 | |
| — | 500.00 | — | — | ||
| Supply of Gauge tie plate insulation as per RDSO drg.no. T-10372/ Alt. 2, T- 10371/Alt.2 ,T-10368/Alt. and to IRS S-23 and S-40. Inspection by Consignee. | — | — | — | 24,780 | |
| — | 1000.00 | — | — | ||
| Supply of William stretcher bar insulation set suitable for ground connection as per RDSO Drg no. T-10367, T-10368, T-10384, IRS-23-88 with Amdt. 1 and S-40-84 with latest amendment. (Inspection: Consignee) | — | — | — | 32,620 | |
| — | 500.00 | — | — | ||
| Supply of Insulation for 'P' bracket for point fitting IRS type complete consisting of Rail Joint splice Plate for 'P' bracket LH side - 01 No. as per RDSO Drg. no. S-3266 Nylon Type -66 as per IRSS-40/84 with latest amendment, Insulation rail joint splice Plate for 'P' bracket RH side - 01 No. as per RDSO Drg. no. S-3265 Nylon Type -66 as per IRS-S-40/84 with latest amendment, Bush for 'P' bracket -04 Nos. to Drg No. S-23199 as per spcn. IRS:s- 40/84 material Nylon Type, Insulating washer for insulated 'P' bracket -04 Nos. to RDSO Drg. no. S-8640 as per spcn. no. IRS-S-40/84 nylon type-66.(Inspection: Consignee) | — | — | — | 72,705 | |
| — | 1000.00 | — | — | ||
| Supply of Screw less mounted 2.5 sqmm. -4 wire front entry two input, two output disconnect cage clamp terminals block for test and measurement (wago or Phonix or Elmex) as per site requirement as per RDSO/SPN/189/2004 ver. 3.0 or latest. Procurement should be done from RDSO approved sources. The color will be decided by Engineer in charge (Preferably in Blue, Red and Grey color in the ratio of 1:2:3) (Inspection : Consignee). | — | — | — | 1,07,860 | |
| — | 200.00 | — | — | ||
| Supply of Steel carrier Rails 35mmx7.5mm, 1mm/0.039 in thick unslotted, yellow with Chrome Wago or similar as per RDSO/SPN/189/2004 Ver.3.0 or latest. Inspection :Consignee. | — | — | — | 29,542 | |
| — | 200.00 | — | — | ||
| Supply of End and Intermediate Plate 2.5 mm/0.098 in Thick Wago or similar as per RDSO/SPN/189/2004 Ver.3.0 or latest. Inspection :Consignee | — | — | — | 3,682 | |
| — | 200.00 | — | — | ||
| Supply of screw less end stop 10mm/0.394 in wide for carrier rail DIN 35 Grey Wago or similar as per RDSO/SPN/189/2004 Ver.3.0 or latest. Inspection :Consignee | — | — | — | 3,202 | |
| — | 20.00 | — | — | ||
| Supply of True RMS Digital Multimeter, 4000 count, 1000 V 4000 counts, updates 3/sec, Resolution of 1mA on AC/DC A ranges & .001 V on V ranges, AC/DC A ranges 5000mA/50/100A, AC/DC ranges V 50/300V, 500 ohm/5/50/500k ohm etc. The meter comprises of minimum additional facility of AC/DC voltage measurement, Resistance measurement, frequency measurement & continuity measurement, Continuity beeper, with One year warranty and backlight display facility.. Make/Model :Fluke 17B+, DI-LOG 9206, or similar or better. (Inspection by Consignee) | — | — | — | 2,11,866 | |
| — | 10.00 | — | — | ||
| Supply of Digital insulation Tester (Megger) 100V, Motwani, Philips or better make. (Inspection by Consignee) | — | — | — | 54,244.3 | |
| — | 300.00 | — | — | ||
| Supply of drill bit size 7.14mm HSS parallel shank twist drill (jobber series) make addison or better. (Inspection: Consignee) | — | — | — | 67,644 | |
| — | 20.00 | — | — | ||
| Supply of 21 KHz/25 KHz web mounted Receiver coil Assembly of HASSDAC (Rx 21/25) as per RDSO Spec. No. RDSO/SPN/177/2012 Ver.-3 or latest compatible for G.G.Tronics make HASSDAC. (Inspection by RDSO) | — | — | — | 7,39,860 | |
| — | 20.00 | — | — | ||
| Supply of 21 KHz/25 KHz web mounted Transmitter coil Assembly of HASSDAC (Tx 21/25) as per RDSO Spec. No. RDSO/SPN/177/2012 Ver.-3 or latest compatible for G.G.Tronics make HASSDAC. (Inspection by RDSO) | — | — | — | 7,39,860 | |
| — | 20.00 | — | — | ||
| Supply of base clamp mounting type axle detector for G.G. Tronic Make SSDAC/HASSDAC. (Inspection by RDSO) | — | — | — | 4,01,200 | |
| — | 30.00 | — | — | ||
| Supply of Lead wool of Good Quality. (Inspection: Consignee) | — | — | — | 11,053.2 | |
| — | 220.00 | — | — | ||
| Supply of Signal Unit polythene cover (100 micron) to protect CLS unit from rain water insertion for 2 aspect Unit. Inspection by Consignee. | — | — | — | 23,183.6 | |
| — | 160.00 | — | — | ||
| Supply of Signal Unit polythene cover (100 micron) to protect CLS unit from rain water insertion for 3 aspect Unit. Inspection by Consignee. | — | — | — | 23,753.6 | |
| — | 40.00 | — | — | ||
| Supply of Signal Unit polythene cover (100 micron) to protect CLS unit from rain water insertion for 4 aspect Unit. Inspection by Consignee. | — | — | — | 7,480.4 | |
| — | 200.00 | — | — | ||
| Supply of Signal Unit polythene cover (100 micron) to protect CLS unit from rain water insertion for Route Arm. Inspection by Consignee. | — | — | — | 37,402 | |
| — | 200.00 | — | — | ||
| Supply of Fiber type Track lead junction Box as per IRS drg. no. SA-20101/M made of FRP material conforming to RDSO/SPN/151/97 or latest with 450mm long and 25mm dia. pipe. (Inspection: Consignee) | — | — | — | 2,32,544 | |
| — | 3000.00 | — | — | ||
| Supply of CAT-6 (STP) cable as per RDSO specification RDSO/SPN/TC/65/2016 Rev. 3.0 or latest. Material should be procured from RDSO approved vendor or OEM supporting certificate shall be provided that the material has been manufactured as per RDSO specification attached. Make-D-Link/Amp/Systimax. Inspection by Consignee | — | — | — | 1,07,580 | |
| — | 8.00 | — | — | ||
| Supply of Single mode 6 Fiber Armored Optic Fibre Cable. It shall Comply to TEC Spec. No. GR/OFC-02/03 September 2003. (TEC Standard Number-TEC 85010-2003) (Inspection: Consignee) | — | — | — | 2,63,216.72 | |
| — | 70.00 | — | — | ||
| Supply of 6 pin emergency socket as per IRS/TC/42/87 (Amd-1) or latest. Inspection by Consignee. | — | — | — | 20,766.2 | |
| — | 1000.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | 3.00 | — | — | ||
| — | 10.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRGCC2022ACS11.pdf
ATTACHMENT
Final_GCC_2022_uptoACS4.pdf
ATTACHMENT
IRGCC2022ACS5.pdf
ATTACHMENT
IRGCC2022ACS6.pdf
ATTACHMENT
IRGCC2022ACS7_1.pdf
ATTACHMENT
IRGCC2022ACS8_1.pdf
ATTACHMENT
IRGCC2022ACS9_1.pdf
ATTACHMENT
StandardTenderDocument2022_1.pdf
ATTACHMENT
correctionslip1toSTD2022_1.pdf
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks1_1.pdf JPO for Protection of ST cables
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
Specialconditionsofwork.pdf
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks1_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .