Neerpur and Patikara, Augmentation of water supply scheme based on canal filteration CM Announcement under Head Rural Augmentation, District Mohindergarh E.Cost Rs. 407.65 lacs. Laying of raw water Inlet Channel, Construction of 1 No. Raw Water Balan

Amount

Supply & erection of Horizontal centrifugal spilt casing type pumps conforming to all respect IS 1520-1972 of following duties directly coupled to AC squirrel cage induction type electric motor conforming to IS 325-1978 with accessories as described in Schedule No. II complete in all respect (the make shall be of Kirloskar, Crumpton, ABB, Siemens, NGFE/ GEC) A) Raw water pumping set at Raw Water Boosting Station(Self priming non clog type) i) 900 LPM with 30 mtrs head pump with squirrel cage induction type electric motor of 1440 RPM, 3 phase 50 Hz of 4-Star rating

B) Raw water pumping set at CB WW Neerpur i) 800 LPM with 12 mtrs head pump with squirrel cage induction type electric motor of 1440 RPM, 3 phase 50 Hz of 4-Star rating

C) Clear water pumping set at CB WW Neerpur i) 800 LPM 45 mtrs head pump with squirrel cage induction type electric motor of 1440 RPM, 3 phase 50 Hz of 4-Star rating

Supplying & fixing of C.I. Double flanged pipe conforming to IS-7181 and amended upto date with ISI marked including cost of Jointing materials, jointing and testing in position as directed by Engineer-in-Charge complete in all respect specification as described in Schedule No. II. 150 mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories. 1. Incomer Switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp 3. Volt Meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T)

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet dully stouted with suitable angle iron frame work and completed powder coated of approximate size 1200x900mm having following items A) For Raw Water Pumpsets for 900 lpmx 30 M Head = 2 Nos. a) Main switch – Amp. 2 Nos. (L&T, Siemens, ABB) b) Volt Meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp. Meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3= Nos. (AE/KAPPA/L&T) e) VSS = 1 No. & ASS = 2 Nos. of approved make f) SPP 2 No. of approved make g) Motor starter, star delta 2 No. for 2600 lpm x 12 M. Head motor (L&T Simens AAB) h) Capacitor of suitable capacity = 2 Nos. i) Indicating lamp = one set j) Change over switch = Amp. 1 No.

A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet dully stouted with suitable angle iron frame work and completed powder coated of approximate size 1200x900mm having following itemsA) For Raw Water Pumpsets for 800 lpmx 12 M Head = 2 Nos. a) Main switch – Amp. 2 Nos. (L&T, Siemens, ABB) b) Volt Meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp. Meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3= Nos. (AE/KAPPA/L&T) e) VSS = 1 No. & ASS = 2 Nos. of approved make f) SPP 2 No. of approved make g) Motor starter, star delta 2 No. for 2600 lpm x 12 M. Head motor (L&T Simens AAB) h) Capacitor of suitable capacity = 2 Nos. i) Indicating lamp = one set j) Change over switch = Amp. 1 No.

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet dully stouted with suitable angle iron frame work and completed powder coated of approximate size 1200x900mm having following items A) For Raw Water Pumpsets for 800 lpmx 45 M Head = 2 Nos. a) Main switch – Amp. 2 Nos. (L&T, Siemens, ABB) b) Volt Meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp. Meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3= Nos. (AE/KAPPA/L&T) e) VSS = 1 No. & ASS = 2 Nos. of approved make f) SPP 2 No. of approved make g) Motor starter, star delta 2 No. for 2600 lpm x 12 M. Head motor (L&T Simens AAB) h) Capacitor of suitable capacity = 2 Nos. i) Indicating lamp = one set j) Change over switch = Amp. 1 No.

Supply, erection, testing ISI marked copper wire for 6 Nos. motors with underground system in PVC and flexible pipes copper wire size three core complete in all respects with accessories like thimble etc. 10 mm sq. three core

6 mm sq. three core

Supply erection testing and commissioning of Electronic FLOW METER (KRONE Make) with digital display for required size complete in all respect specification as described in Schedule No. II 150 mm i/d

Supply erection, and commissioning of electric operated dewatering pump of 3.00 BHP (Kirlosker make) complete from priming with wiring starters switches etc. also including with the required GI pipe (B Class), valves, special etc. complete in all respect specification as described in Schedule No. II

Supply erection testing and commissioning of Pressue gauge with glistening immersed complete in all respect.

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete with suitable G.I sheet Ducting in meter room and pump Chamber and energy for the sites.

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make with suitable GI pipe complete in all respect.

Supply & fixing of insulated rubber matting suitable for 11 KV instllation 1 Mtr. x 2 Mtr. x 3 mm / as per panel space for sites as per specification giving in IS code 15650-2006 complete in all respect.

Supplying & fixing S.S. (Stainless Steel) floating arms along with swivel bend as per required specifications approved by Engineer-in-Charges (250 mm i/d)

Supplying erection & testing of LED Light of 200 watts (Manufactured by reputed make i.e. Phillips/ Bajaj/ Crompton/ G.E./ Wipro) including all required fittings like PVC copper wire, MCB Switch and other required accessories complete in all respect.

Providing laying jointing and fixing of cast iron "V" notch duly marked with beam including embedding in 1:2 cement and grouting leveling and finishing complete in all respect.

Operation and maintenance for the complete scope of work mentioned in the DNIT (Disinfection material supplied by the PHED) as per Schedue-IV for a period of 5 years after 12 months during defect liability and 3 months trial run period (Will be charges to the A/Mtc. Estimate) Operation and maintenance during defect liability period (operation only) after 3 month trial run period

For 1st year Operation and maintenance after defect liability period

For 2nd year Operation and maintenance

For 3rd year Operation and maintenance

For 4th year Operation and maintenance

For 5th year Operation and maintenance

Bidder Name

Amount

M/s Shree Jagdamba Ji Tubewells Narnaul(GSTN-06AGIPK1100H1Z0)

Devinder Kumar Contractor(GSTN-06CEEPK3098C1ZN)

Devender Singh Contractor(GSTN-NA)

SUKHBIR SINGH CONT(GSTN-NA)

SUNIL KUMAR CONTRACTOR(GSTN-NA)

Devinder Kumar Contractor

SUNIL KUMAR CONTRACTOR

Devender Singh Contractor

SUKHBIR SINGH CONT

M/s Shree Jagdamba Ji Tubewells Narnaul

SUNIL KUMAR CONTRACTOR

SUKHBIR SINGH CONT

Devinder Kumar Contractor