ESTIMATE FOR THE CONSTRUCTION OF PUMP HOUSE AT VILLAGE THANWALA UNDER KATHGARH LIFT IRRIGATION SCHEME STAGE-2

Excavation by mechanical means(JCB or Hydraulicexcavator) in trenches for pipelines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering, including the cost of dewatering of rainwater,diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15mete rcomplete in all respect.

Earth work upto 1.5 m. Depth for

All classes of soil except rocky

Compaction of earthwork & Preparation of sub grade including loosening, leveling of earth 225mm thick to player,rough dressing ofsoil, final dressing of earth to give level, camber,watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers)

Shuttering for faces of concrete foundation sand foundation beam & plinth beam (vertical or battering)

Cement concrete 1:3:6 with stone ballast or shingle mixing by manual means

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc

8 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Providing and fixing cast iron 100mm dia rain water pipe with screw and wooden plugs fixed and wall face including filling joints with spunyarn and cement mortar 1:2 excluding head and shoes etc.

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Glass panes ISI Marked at site of work Frosted 4mm thick (10.75 kg/sqm)

White washing (Three coat)

Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed)

Extra for providing mechanical device, chain and crank operation, for operating rolling shutter, exceeding 11.20 sqm in area, of the rolling shutter

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying twoormore coats toget required finish

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

PN - 16 Pipe, 16mm o/d

PN - 16 Pipe, 20mm o/d

PN - 16 Pipe, 25mm o/d

PN - 16 Pipe, 32mm o/d

Triple Layer Tanks

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in- charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

mailto:[email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Providing,Laying, fixing&jointingof P.V.C. Pipesasper ISI-4985 (ISImarkedwith the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches tocorrectalignmentandgradients, cutting, jointingand testingcompleteasper specifications.

160mmo/dPVCpipeof 2.5Kgf. / sqcm

Providingand fixing jet spraywith2'-6" long PVC pipe. With PTMT nut

Providing & fixing in position CommercialRO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stagepurificationprocessof approvedmake (to the approval of Engineer-in- charge ) including carriage and fixing in position complete in all respect.

Providing & fixing in positionWater Cooler without Stablizer of approvedmake (to the approval of Engineer-in-charge ) including carriage complete in all respect. Water Cooler Full Steel Body40/80 ltr Capacity without Stablizer

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin.

Sink with drain board overall size 1070x464mm bowl size 430x355x200mm and waste coupling

REPLACEMENT OF WIRES, SHEETS, SWITCHESANDOTHERACCESSORIES INTHEEXISTINGRECESSEDCONDUIT PIPE WIRING SYSTEM (WITH FLUSH PIANO TYPE ACCESSORIES) Derived From CSR 34.03: Replacement of PVC insulated copper conductorsinglecoreFRcable(ISImarked) overall1.5sq.mm,1100volt sgradetobe laid in existingheavygaugeweldedconduitpipe 20mm/25mmdia (1.6mmthick) ISIMarked, recessed inwall etc., completewith (Flush/ Pianotypeaccessories)Steptypeelectronic fan regulators 100watts (socket size), bell push,5Pin6Amp.,16Amp.universalsockets, 6/16/20Amp.Switchesetc. andcoveredwith brown bakelite white glazed translucent backsidepaintedsheet3mmthicketc.,PVC connector (ForFanBoxandCallBell),PVC Bush, BrassScrews, bonding toearthwith PVCinsulatedcopperconductorsinglecore FRcable (ISI marked) 1sq. mm, 1100volts grade(For6Amp.wall socket&plugcontrol point) andotherpettymaterialetc. including the cost of above material and repair of chases(withfinsihingthesurface):- (Derived From CSR 34.03

Wiring fan point (With fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring6Amp. Plugcontrol comprisingwall socket point

Wiring 16/20Amp. power plug control point

Wiring light point with double control switches.

Overall size 1.5sq.mm (48/0.20mm), 2Core

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply&erectionofPVCConduitPipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other pettymaterials etc.,asperPWDGeneral Specifications:

Heavy Gauge PVC Conduit Pipe 20 mm dia. (Flushed)

Earthing with 8S.W.G. (4mmdia.)G.I.wire in 15mmdiaG.I. pipewithG.I. reducing socket 50mm x 15mm (upto 14Metre in length)

ON LOAD CHANGEOVER SWITCH: 34.22 A ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure): Supply and erection of On Load Change over Switch with advance neutral UNIT (Panel mounting Cubical type) in the existing Cubical Panel Confirms to IS 13947 (Part-3) completewithG.I. Bolts, Nuts &Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:

On Load Change Over Switch Four Pole 63amp., 415volts

Please Enable Macros to View BoQ information