Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.8 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹4.8 L+₹1,108.10 (0.23%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹4.8 L+₹2,794.33 (0.58%)Admitted-Finance | L3 | Admitted-Finance | ||
| 4 | L4₹5.0 L+₹16,525.09 (3.43%)Admitted-Finance | L4 | Admitted-Finance | ||
| 5 | L4₹5.0 L+₹16,525.09 (3.43%)Admitted-Finance | L4 | Admitted-Finance |
Tender Value
₹4.8 L
EMD Value
₹9,636
Closing Date
5 Aug 2026, 2:00 pmClosed
AE_CHETLA_SUB_DIVISION_PWD
Assistant Engineer, Chetla Sub-Division, PWD 1st Floor 32_Belvedere Road Alipore Kolkata_700027
Repair and renovation of wooden wall panelling with Lamination of the Chamber, anti chamber and attached office of ADG, Room no-202, WB at 2nd floor of Bhabani Bhaban main building, Alipore, Kolkata-27 during the year 2026-27.
2026_WBPWD_5017056_4
WBPWDAECSD/NIET01CSD/26-27
Open Tender
CIVIL WORKS
Percentage
15 days
ALIPORE
Please refer Tender documents.
5 documents required · 5 mandatory
₹9,636
Yes
28 Sept 2026
21 Jul 2026
7 Aug 2026
24 Jul 2026
5 Aug 2026
24 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.[concrete plaster will be paid separately] | 90 | sq.m | 55 | ₹4,950 |
| 2 | ii) Godrej Hydraulic door closer fitted and fixed complete.
(a) Heavy type | 2 | nos. | 2,064 | ₹4,128 |
| 3 | A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost
of nails, screws etc.) (The quantum should be corrected upto three decimals) (iii) Sal : Malayasian in 2nd floor | 0.84 | kg | 83,683 | ₹70,544.77 |
| 4 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work
and teak wood batten/Lipping]
(iv) 12mm | 93.6 | sq.m | 1,737 | ₹1,62,583.2 |
| 5 | (A) Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid
span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and
Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed
perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia
G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). | 31.5 | sq.m | 591 | ₹18,616.5 |
| 6 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.
The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre.
(i) Thickness of laminate 1.5mm | 172.8 | sq.m | 830 | ₹1,43,424 |
| 7 | GST @ 18% | 4,04,247 | GST | 0.18 | ₹72,764.46 |
| 8 | Cess @ 1% | 4,77,011 | Cess | 0.01 | ₹4,770.11 |
stage.html
html • 0.15 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
Tendernotice_2.pdf
PDF • 1.21 MB
BOQ_5087032.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .