Renovation of existing slaughter house at Nelpettai in ward 49

Amount

Dismantling AC Sheet Roofing without roof timbers GI

Clean removal of cement plaster from walls etc, complete.

Manufacturing and supplying the M.S. WELDMESH GRILL in position as directed by the Departmental officers with necessary columns bolt and nuts etc. complete The weldmesh grill made out of 25 x 25 x 6mm M.S.angles as outer frame alround with 20mm x 3mm M.S.flat welded both horizontally and vertically and stiffeners as per horizontally and vertically and stiffeners as per required design the total surface (0.50 metre centre to centre) and covered and welded with 3" x 1" weldmesh of 10 x 6G grinding and smoothin the entire welded portion conveying the finished materials to the work site and fixing them in position with required clamps, bolt and nuts including the labour charges for drilling the project portion of R.R. Masonry to neat the frame of weldmesh work removing the R.R. Stone or drilling the required of size of holes for insarting the clamps aligning the grill the plumb filling and two coats of Approved enamels paint over one coat of red oxide and etc., Complete

Plain Cement Concrete1:4:8 (one cement four fine aggregates and eight coars eaggregates)using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing,laying and labour charges and all incidential charges such as water providing etc.,complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4"X41/4"X 2 1/4 including finishing, curing, etc., complete complying with standard specification - 100CFT Ground Floor

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Redadooing the sides of wall with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set TWAD-DATA-P-176

Supply and fixing of single box type 4'40W flu Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. TWAD-DATA-P-204

Plastering with CM1:3(one cement and five sand) 20mm thick 10m2.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. hmm MS square tubes for top. lock and bottom rails. The steel tubes shall be covered with Smm thick solid PVC sheets. Shutter using Smm thick solid PVC sheets foi paneling shall hqiaiy fixed in position including necessary furniture and fittings. The over all size at styles shall be 50mm x 30mm. The over all size of top rail, Lock nail and bottom rail shall be 75mm x 30mm The over all si2e of frames shall be 50mm x 45mm with suitable rebate for housing the shutter and should have provision to fix AL drops, tower bolt hinges and lock plates inclusive of cr›st of all materials etc complete complying with thew standard specifications.R

Providing water closet 580X440mm size Orissa type Indian make with (P) trap including fixing a pair of foot rests over a bed of brick jelly concrete in LM 1:2 using 40mm broken brick jelly 100 mm thick and top plastered with C.M. 1:3 (one cement and three sand) 20mm thick etc. complete.

Fabricating supplying and fixing of prepainted galvanized ironsheets with the following specification.The materials should be of PPGI tile profile with ared colour or any other approved design 0.47mm thick 24guage having width 1050mm. The sheet should be G.I. base prepainted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish option al matt finish.The sheet to be fixed with making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site condition and as directed by the departmental officers.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 MDU-CORP-BUILD-DATA-P-62-Sl-87

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors

160mm 6 ksc pvc pipe Supply of pipe and pvc special as per ISI etc., completed

160mm 6 ksc pvc bend

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Supplying Fabricating erecting of Oramental grill work(for required size 2.30x0.60cm)for top welded type using ms channel angle flat and squire bars etc conforming to is specification includind primer coating and enamal painting as per design given by the departmental officers etc,complete as per std specification.,

Supply and Delivery of Barbed wire using 10Gauage two Play and four Proposed galvansh iron wire of all size including cost and conveyance all labour charges etc complete.

Labour Charges for Barbed wire and Chain Link using 10Gauage two Play and four Proposed galvanished iron wire of all size including cost and conveyance all labour charges etc complete.FENCING

Supply and Delivery of Chain Link - 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes) including cost and conveyance all labour charges etc omplete. (S.I No:134)

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm X 30cm X45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATER MARK on the sheeting surface for identification. Single Arrow Big Size NAME BOARD Double Arrow Big Size 96"X 48"NAME BOARD

Add GST 18%

C SATHIYASEELAN (BID ID -1111038)