SPL REPAIR FOR EXTERNAL PLASTERING AND PAINTING TO BLDG NO. P-188/1-4, P-197/1-20,P-215/1-12, P-217/1-12,P-220/1-12, P-230/1-9,P-234/1-9 AT RT LINE MD ACCN OF 11CSR AND CERTAIN REV/MINOR WORKS IN THE AOR OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description on brick or stone masonary, including raking out joints, hacking for key, scrubbing down with water etc. by using mechanical/ electrical method complete all as specified and directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto four storey complete all as specified.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Taking up or down steel tubing 20mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed.

Refixing 20mm dia old steel tubing and connection in new or old position (wall ceiling floor etc including cutting altering the size or changing the new fittings etc complete all as directed by Engr-in-Charge.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from floors or walls complete all as specified and as directed.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from floors or walls complete all as specified and as directed.

Supply and fixing 100mm dia cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in floors or fixed to walls etc. complete all as specified and directed.

Fixing only 100mm dia cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in floors or fixed to walls etc. complete all as specified and directed.

Supply and fixing 75mm dia cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in floors or fixed to walls etc. complete all as specified and directed.

Fixing only 75mm dia cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in floors or fixed to walls etc. complete all as specified and directed.

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore pipe complete all as specified and directed.

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.

Supply and fixing cast iron branch pipes, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing cast iron branch pipes, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing cast iron cowls, 75mm size complete all as specified and directed.

Supply and fixing cast iron cowls, 100mm size complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Complete removal of existing surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of old surface of wooden of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for preparation of old surface of steel of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Demolition of cement concrete (reinforced) of any description in ground floor and paving not exceeding 15 cm in thickness (below or above ground level) complete all as specified and as directed.

Supply, hoist and fixing in position, 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all required fittings complete all as specified and as directed.

Supply and fixing 20mm ball brass valve high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and complete all as specified and as directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specifed and as directed.

Surface excavation in soft/ loose soil n. exc. 30cm deep and averaging 15cm deep and getting out all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete etc, complete all as specified and as directed.

Material & labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in cills, blocks, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets,roof padding, water troughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining ( veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick in cement mortar (1:4) screed bed or bedding layer complete all as specified and directed.

Supply and fixing mild steel framed work for such as guard bars/ grills, gate,grating etc with ornamental and intricated design including MS angle, channel, flat iron, round bars, plate etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.

Material and labour for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour 80mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note: Sand for sand cushioning shall be measured and paid for separately.

Rounding/ moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.

KAMAL AGGARWAL

ADITI CONSTRUCTION CO