Deck Highest Point And Wetland Habitat

Part "I" : Deck : Highest Point (Deck 1) Construction of 0.30 M wide x 0.15 Mtr thick with stone and brick masonary mixed for proper levelong work and racking work should be completed with CM 1:4 mortar and plaster work in cement sand mortar 1:3 with thickness of 12 mm . The top of above wall should be completed with 100 mm thick RCC by using minimum Reinfrocement and 1:1.5: 3 mixture ratio . The wooden finishing work should be done on above wall specification and one visible site completed by bamboo/ Bally design and drawing approved by site incharge enginerr.

Making of Railling as per following specification and design 2 nos vertical pole should be made in 1.0 mtr distance and 1.0 mter height and also 3 inch thickness . 2 nos cross pole should be made as per above specfication and 1.0 nos horizontal pole should be use made on top side as per above specification 1 nos 8 mm size bar should be used every pole with 6 nos rings of 4 mm GI wire. the staireless steel murga jalli should be fixed with every pole of CC works or all poles should be completed by 1:1:2 ratio RCC mixture. the plaster work should be completed by 1: 2 mortar or not less 12 mm thickness. finishing work should be completed by white cement oxside set colou as per direction and made the pillar in bally or bomboos design a=or as per direction after finishing work should be done two coated touch wood work should be done as per direction of engineer.

Part "II" : Deck : Near Wetland Habitat (Deck 2) Construction of 0.30 M wide x 0.15 Mtr thick with stone and brick masonary mixed for proper levelong work and racking work should be completed with CM 1:4 mortar and plaster work in cement sand mortar 1:3 with thickness of 12 mm . The top of above wall should be completed with 100 mm thick RCC by using minimum Reinfrocement and 1:1.5: 3 mixture ratio . The wooden finishing work should be done on above wall specification and one visible site completed by bamboo/ Bally design and drawing approved by site incharge enginerr.

Making of Railling as per following specification and design 2 nos vertical pole should be made in 1.0 mtr distance and 1.0 mter height and also 3 inch thickness . 2 nos cross pole should be made as per above specfication and 1.0 nos horizontal pole should be use made on top side as per above specification 1 nos 8 mm size bar should be used every pole with 6 nos rings of 4 mm GI wire. the staireless steel murga jalli should be fixed with every pole of CC works or all poles should be completed by 1:1:2 ratio RCC mixture. the plaster work should be completed by 1: 2 mortar or not less 12 mm thickness. finishing work should be completed by white cement oxside set colou as per direction and made the pillar in bally or bomboos design a=or as per direction after finishing work should be done two coated touch wood work should be done as per direction of engineer.