TAS REVAMPING BALASORE NEW IRD

SUPPLY OF MFM 3" — FLOWMETER,MASS; MANUFACTURER:N/A; MODEL:N/A; PRESSURE DESIGN,FLANGE:N/A; ADDITIONAL INFORMATION:SIZE:3 IN; INGRESS PROTECTION:IP 65; RANGE,INSTRUMENT:200/1500 LPM; FOR WHITE OIL CONFIRMING AND IEC/ EN60529 AND CUSTODY TRANSFER APPROVAL AS PER OIML R117 AND COMMUNICATION OVER RS 485 AND OTHER SPECIFICATIONS AS PER TENDER SPECIFICATIONS AND APPROVED DATASHEETS

ERECTION OF MFM 3" — ERECTION OF 3 INCH MASS FLOW METERS IN WHITE OIL GANTRY, STRAINER CUM AIR ELIMINATOR WITH DPG AS PER APPROVED DRAWING. SCOPE INCLUDES DISMANTLING OF OLD ITEMS AND STORAGE OF SAME AS PER INSTRUCTION OF SITE IN CHARGE.

TESTING & COMMISN MFM 3" — TESTING AND COMMISSIONING OF 3 INCH MASS FLOW METERS, STRAINER CUM AIR ELIMINATOR WITH DPG AS PER APPROVED FDS AND MEETING THE REQUIREMENT OF HPCL EIC.

SPLY OF STRAINER AIR — ELIMINATOR; TYPE:AIR,STRAINER; MATERIAL:CARBON STEEL; PRESSURE RATING:15 KG/SQ.CM; TEMPERATURE RATING:-20 TO 50 DEG; SIZE:80 MM; CLASS 150, ANSI B16.5, RAISED FACE, MESH 40/60, SIRE ELIMINATOR, MATERIAL SPEC: ASTM A 352 LCB, SEAL VITRO/BUNA N

ERECTION OF STRAINER 3" — ERECTION OF ABOVE STRAINER CUM AIR ELIMINATOR AS PER APPROVED DRAWING. SCOPE INCLUDES DISMANTLING OF OLD ITEMS AND STORAGE OF SAME AS PER INSTRUCTION OF SITE IN CHARGE.

TESTING & COMMNG OF — TESTING AND COMMISSIONING OF 3 IN STRAINER CUM AIR ELIMINATOR AS PER APPROVED FDS AND MEETING THE REQUIREMENT OF HPCL EIC.

SUPPLY OF 3" DCV — VALVE,CONTROL; MANUFACTURER:N/A; MODEL:N/A; TYPE:DIAPHRAGM,DIGITAL; MAT SPEC,BODY:N/A; PRESSURE DESIGNATION:1500 LPM; SPEC,LEAKAGE:N/A; TYPE,ACTUATOR:N/A; PRESSURE,AIR SUPPLY:N/A; SERVICE:N/A; FLOW COEFFICIENT (CV):N/A; SIZE:75 MM; EXPLOSION PROOF CLASS 1, GROUP II A AND II B, T3 AND WEATHER PROOF TO IP65 AND AS PER TENDER SPECIFICATIONS AND APPROVED DATASHEETS FOR WHITE OIL.

ERECTION OF CONTROL — ERECTION OF 3 INCH DIRECTIONAL CONTROL VALVES AS PER APPROVED INSTALLATION DRAWING. SCOPE INCLUDES DISMANTLING OF OLD ITEMS AND STORAGE OF SAME AS PER INSTRUCTION OF SITE IN CHARGE.

TESTING & COMMNG 3" DCV — TESTING AND COMMISSIONING OF 3 INCH DIRECTIONAL CONTROL VALVES AS PER APPROVED FDS AND MEETING THE REQUIREMENT OF HPCL EIC.

VALVE,BALL,FLG,#150,75MM — VALVE,BALL,FLANGED; DESIGN SPEC:ASME B16.5; SERVICE:N/A; PRESSURE DESIGNATION:CLASS 150; TYPE OF BORE:N/A; FACING,FLANGE:SLIP-ON RAISED FACE; FINISH,FLANGE FACING:125AARH; MATERIAL,BODY:N/A; SIZE:75 MM; TYPE: MANUAL ISOLATION, API-6D, FIRE SAFE, ANTI STATIC, DESIGN CODE: BS5351.