Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.9 Cr
EMD Value
₹6.1 L
Closing Date
8 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE (AF) GANDHINAGAR
CE (AF) GANDHINAGAR Lekawada Patia, Chiloda, Gandhinagar-382042
DEMOLITION OF BUILDINGS T 4 AND P 40 VISITORS ROOM AND CONSTRUCTION OF REGIMENTAL SHOPS OTHER DEFICIENT OTM ACCN AND DEFICIENT OMQS AT AF STATION JAIPUR
2025_MES_725808_1
80335/E8
Open Tender
Civil Works
Lump-sum
548 days
AGE (I) AF Jaipur
AS PER NIT
7 documents required · 7 mandatory
₹3,000
AGE (I) AF JAIPUR
₹6.1 L
Yes
31 Oct 2025
12 Aug 2025
10 Nov 2025
12 Aug 2025
8 Nov 2025
1 Nov 2025
16 Aug 2025 - 23 Aug 2025
NOTE: Schedule ‘A’ Part I to XV under Ser No. 1.00 to 15.00 are prepriced by MES. Bidders shall insert their lumpsum amount in the green coloured field under Col-6 only.
Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A' Part I.
Lump sum price worked out for EXCAVATION, EARTH WORK AND SITE CLEARANCE as listed in Sch 'A' Part II
Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A' Part III
Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part IV
Lump sum price worked out for ROAD/ PATH/ HARDSTANDING/ CULVERT as listed in Sch 'A' Part V
牯畭瑬獩牴湡敤潣灰牥挠湯畤瑣牯漠楳敺㈠⼳⸰㤱″牦浯挠楥楬杮爠獯潴映瑩楴杮挠浯汰瑥污獡猠数楣楦摥愠摮愠楤敲瑣摥ƀ匀灵汰⁹湡楦⁸䕌⁄畴敢氠杩瑨映瑩楴杮洠物潲祴数眠瑩污浵湩畩潨獵湩Ⱨ栠杩畯灴瑵搠晩畦敳′敦瑥〱眠瑡⁴㈲‰⁖䍁敤潣慲楴敶琠灹楷桴搠楲敶潨摬牥愠摮䰠䑅氠浡ੰ湩汣摵湩潣湮捥楴杮甠⁰楷桴琠牨敥挠牯汦硥扩敬挠灯数潣摮捵潴慣汢景猠極慴汢楳敺映潲散汩湩潲敳琠楦瑴湩楷桴眠牡慲瑮⁹灯楴湯漠‵敹牡牦浯搠瑡景椠獮慴汬瑡潩潣灭敬整愠汬愠灳捥晩敩湡楤敲瑣摥洮畓灰祬愠摮䤠獮慴汬瑡潩景匠慭瑲吠牨敥倠慨敳䴠瑥牥漠楤晦牥湥⁴慭敫渨瑯洠牯桴湡㌠″‥景愠瀠牡楴畣慬慭敫 湩汣摵湩潰祬慣扲湯瑡潢數楷桴琠慲獮慰敲瑮挠癯牥琠楶睥洠瑥牥搠獩汰祡眠瑩桴潦汬睯湩灳捥晩捩瑡潩獮愨 䍁吠牨敥倠慨敳䘠畯楗敲慔灭牥倠潲景瑓瑡捩䴠瑥牥漠汃獡⸱ⰰ㌠砠㈠〴嘠〵䠠ⱺㄠ䄰ㄭ〰ⱁ眠瑩㘱〰椠灭汵敳数坋…噋牁ⱨ䰠䑅映牯爠汥祡猠慴畴ⱳ挠湯潦浲湩潴䤠ⵓ㘱㐴‴瑳湡慤摲眠瑩湩畢汩⁴散汬汵牡漠湩畢汩⁴㘸ⴵ㘸‷䡍⁺‶潌⁷䅐⁎敍桳删摡潩䘠敲畱湥祣挠浯畭楮慣楴湯映捡汩瑩⁹楷桴猠汥敨污湩敍桳渠瑥潷歲眠瑩敤慦汵⁴湡湯搠浥湡楤灳慬ⱹ戠汩楬杮搠瑡敧敮慲楴湯映捡汩瑩ⱹ愠瑮慴灭牥映慥畴敲ⱳ䴠捩潲牰捯獥潳湡䍌⁄慢敳楤灳慬⁹湯祬眠瑩潣灭瑡扩敬䤠㕐‴潣灭楬湡⁴潰祬慣扲湯瑡潢⁸潦畯摴潯潭湵楴杮眠瑩灯楴慣潰瑲瀠潲楶楳湯漠敭整潢ਠ戨 敍整桳畯摬猠灵潰瑲琠敨映汯潬楷杮搠瑡㩡ㄠ⼵〳洠湩椠獮慴瑮湡潥獵搠瑡潦潖瑬条ⱥ䌠牵敲瑮潐敷慦瑣牯潐敷Ⱳ䌠浵汵瑡癩湥牥祧愠摮映敲畱湥祣潭瑮汨⁹楢汬湩慤慴愠摮愠瑮瑩浡数敦瑡牵獥潌摡猠牵敶⁹慤慴映牯㐠‵慤獹眠瑩〳洠湩椠瑮来慲楴湯瀠牥潩潦坫ⱨ嘠汯慴敧畃牲湥ⱴ映敲畱湥祣攠捴ਮ挨 敍整桳畯摬栠癡潣湮捥⽴搠獩潣湮捥⁴畦据楴湯污瑩⁹灯牥扡敬映潲牰灥楡楢汬湩潳瑦慷敲愠摮猠慨汬猠潨⁷慢慬据湯搠獩汰祡ਮ搨 桔敭整桳畯摬猠灵潰瑲漠数潣浭湵捩瑡潩牰瑯捯汯䐠䵌⁓楷桴琠敨猠景睴牡上瑯獥ⴺ⠠⥩䤠⁴桳畯摬爠湵琠敨洠瑥牥椠潢桴瀠敲慰摩愠摮瀠獯灴楡潭敤⠊楩 桔敭整獲猠潨汵慣牲⁹‵敹牡眠牡慲瑮⠊楩⥩传䵅猠慨汬栠癡睯䅎䱂愠捣敲楤整慬潦整瑳湩敭整獲愠数卉ㄠ㐶㐴愠摮挠牥楴楦慣楴湯猠慨汬戠牰癯摩摥搠牵湩慳灭敬愠灰潲慶੬椨⥶吠敨洠瑥牥挠獯⁴桳畯摬椠据畬敤䐠啃 慇整慷⁹湡敲数瑡牥挠獯⁴潦䙒挠浯畭楮慣楴湯洠瑥牥杳畓灰祬愠摮䤠獮慴汬瑡潩景匠慭瑲匠湩汧桐獡敍整景搠晩敦敲瑮洠歡獥⠠潮⁴潭敲琠慨㌳┠漠慰瑲捩汵牡洠歡⥥椠据畬楤杮瀠汯捹牡潢慮整戠硯獥眠瑩牴湡灳牡湥⁴潣敶潴瘠敩⁷敭整楤灳慬⁹楷桴琠敨映汯潬楷杮猠数楣楦慣楴湯㩳⠊⥡䄠⁃楓杮敬倠慨敳吠潷圠物ⱥ吠浡数牐潯ⱦ匠慴楴敍整景䌠慬獳ㄠ〮㐲‰ⱖ㔠‰穈䄵㘭䄰楷桴㌠〲‰浩異獬獥瀠牥䬠桗䰬䑅映牯†桐獡牰獥湥散愠摮䰠䑅映牯删汥祡猠慴畴ⱳ挠湯潦浲湩潴䤠ⵓ㘱㐴‴瑳湡慤摲眠瑩湩畢汩⁴㘸ⴵ㘸‷䡍⁺‶潌⁷䅐⁎敍桳删摡潩䘠敲畱湥祣挠浯畭楮慣楴湯映捡汩瑩⁹楷桴猠汥敨污湩敍桳渠瑥潷歲眠瑩敤慦汵⁴湡湯搠浥湡楤灳慬ⱹ戠汩楬杮搠瑡敧敮慲楴湯映捡汩瑩ⱹ愠瑮慴灭牥映慥畴敲ⱳ䴠捩潲牰捯獥潳湡䍌⁄慢敳楤灳慬⁹湯祬眠瑩潣灭瑡扩敬䤠㕐‴潣灭楬湡⁴潰祬慣扲湯瑡潢⁸潦畯摴潯潭湵楴杮眠瑩灯楴慣潰瑲瀠潲楶楳湯漠敭整潢ਠ戨 敍整桳畯摬猠灵潰瑲琠敨映汯潬楷杮搠瑡㩡ㄠ⼵〳洠湩椠獮慴瑮湡潥獵搠瑡潦潖瑬条ⱥ䌠牵敲瑮潐敷慦瑣牯潐敷Ⱳ䌠浵汵瑡癩湥牥祧愠摮映敲畱湥祣潭瑮汨⁹楢汬湩慤慴愠摮愠瑮瑩浡数敦瑡牵獥潌摡猠牵敶⁹慤慴映牯㐠‵慤獹眠瑩〳洠湩椠瑮来慲楴湯瀠牥潩潦坫ⱨ嘠汯慴敧畃牲湥ⱴ映敲畱湥祣攠捴ਮ挨 敍整桳畯摬栠癡潣湮捥⽴搠獩潣湮捥⁴畦据楴湯污瑩⁹灯牥扡敬映潲牰灥楡楢汬湩潳瑦慷敲愠摮猠慨汬猠潨⁷慢慬据湯搠獩汰祡ਮ搨 桔敭整桳畯摬猠灵潰瑲漠数潣浭湵捩瑡潩牰瑯捯汯䐠䵌⁓楷桴琠敨猠景睴牡上瑯獥ⴺ⠠⥩䤠⁴桳畯摬爠湵琠敨洠瑥牥椠潢桴瀠敲慰摩愠摮瀠獯灴楡潭敤⠊楩 桔敭整獲猠潨汵慣牲⁹‵敹牡眠牡慲瑮⠊楩⥩传䵅猠慨汬栠癡睯䅎䱂愠捣敲楤整慬潦整瑳湩敭整獲愠数卉ㄠ㐶㐴愠摮挠牥楴楦慣楴湯猠慨汬戠牰癯摩摥搠牵湩慳灭敬愠灰潲慶੬椨⥶吠敨洠瑥牥挠獯⁴桳畯摬椠据畬敤䐠啃 慇整慷⁹湡敲数瑡牥挠獯⁴潦䙒挠浯畭楮慣楴湯洠瑥牥ॳ䕐⁒䕍䕔�畓灰祬湩Ⱨ䘠硩湩Ⱨ䌠浯業獳潩楮杮愠摮琠獥楴杮漠潣普杩牵瑡潩景挠潬摵戠獡摥瀠敲慰摩猠景睴牡楷桴映汯潬楷杮洠摯汵獥›⠊⥩䴠瑥牥䐠瑡慍慮敧敭瑮䴠摯汵㩥吠敨洠瑥牥搠瑡慭慮敧敭瑮洠摯汵潷汵敢爠獥潰獮扩敬映牯挠汯敬瑣湩桴慤慴映潲桴慤慴挠湯散瑮慲潴湡慭敫琠敨搠瑡癡楡慬汢潴琠敨戠汩楬杮猠獹整吠敨猠獹整潷汵畳灰牯⁴景汦湩敭整慤慴攠瑮祲吠敨洠瑥牥搠瑡慭慮敧敭瑮猠獹整潷汵慣瑰牵湡牰癯摩桴潦汬睯湩慤慴愨 〳業湩瑳湡慴敮畯慤慴映潲污桴敭整獲映牯猠癥湥瀠牡浡瑥牥䌠浵汵瑡癩湅牥祧潐敷Ⱳ䌠牵敲瑮潖瑬条ⱥ倠睯牥映捡潴湡牆煥敵据⠊⥢䴠湯桴祬愠摮焠慵瑲牥祬戠汩楬杮猠牵敶⁹慤慴映牯挠浵汵瑡癩湥牥祧愠摮洠硡搠浥湡Ɽ䰠慯畓癲祥䐠瑡ⱡ吠浡数癅湥獴⠊楩 潃浭湵捩瑡潩潭畤敬›桔祳瑳浥猠潨汵牰癯摩潣浭湵捩瑡潩景攠敮杲⁹慤慴愠摮戠汩獬瘠慩瀠楲瑮浥楡⠊楩⥩䴠瑥牥䴠獡整慄慴㨠吠敨猠獹整桳畯摬猠灵潰瑲洠瑥牥搠瑡敲潰楳潴祲桔祳瑳浥猠潨汵畳灰牯⁴敭整敲汰捡浥湥⁴牰捯獥⠊癩 硅散硅潰瑲›桔祳瑳浥猠潨汵畳灰牯⁴硥潰瑲漠敭整楲杮愠摮戠汩楬杮搠瑡湩攠捸汥映牯慭ੴ潎整㩳椨 潓瑦慷敲猠慨汬戠潣灭瑡扩敬眠瑩污慭敫景猠慭瑲洠瑥牥愠摮猠慨汬戠䕃呒䤭⁎散瑲晩敩牦浯䌠剅⁔灡牰癯摥瘠湥潤獲映牯愠祮挠批牥猠捥牵瑩⁹敲慬整桴敲瑡愠摮挠浯汰楹杮愠数久⁃畧摩汥湩獥ਮ椨⥩䤠⁴桳污污潳椠据畬敤爠捥牵楲杮匠卍挠慨杲獥浅楡慧整慷⁹湩整牧瑡潩档牡敧ⱳ瀠祡敭瑮朠瑡睥祡挠慨杲獥映牯漠汮湩敭整敲档牡敧攠捴湡桳污敢椠据畬敤湩焠潵整慲整映牯㈠礠慥獲搠晥捥⁴楬扡汩瑩⁹数楲摯ਠ椨楩 牐癯獩潩潦潣灭敲敨獮癩灯牥瑡潩湩汣摵湩数楲摯捩挠慨杲獥漠整敬潣灯牥瑡牯浳牡⁴敭整楢汬湩牦浯挠浯汰瑥潩景眠牯楴汬琠敨挠浯数楴湯漠敤敦瑣氠慩楢楬祴瀠牥潩景㈠礠慥獲ਮ椨⥶吠敨猠景睴牡桳畯摬戠潨瑳摥漠䕍呉⁙䍇⁃灡牰癯摥猠牥敶㈠礠慥獲栠獯楴杮挠獯獴猠潨汵敢椠据畬敤۳䴀瑡牥慩湡慬潢牵映牯洠楡瑮湥湡散映敲档浥捩污攠牡桴湩整档潮潬祧眠瑩潣灰牥戠湯敤瑳敥潲″敭牴潬杮㈠⸵‰浭搠慩眠瑩㔲ⴰ業牣湯䌠灯数潢摮摥挠慯楴杮愠摮唠⁌楬瑳摥桔牥桳畯摬戠整浲湩污映牯挠湯敮瑣潩景ㄠ〵砠㔠‰⁸‶浭眠瑩‴潨敬景ㄠ′浭搠慩愠潬杮眠瑩′慢獧漠㔲䬠獧攠捡景攠牡桴攠桮湡楣杮挠浯潰湵吠敨挠敨業慣潣灭畯摮猠潨汵敢琠獥整湡散瑲晩敩祢愠祮丠䉁⁌捡牣摥瑩摥氠扡牯瑡牯⁹楷桴㤠‵数捲湥⁴慣扲湯挠湯整瑮桔整瑳湩慬潢慲潴祲猠潨汵敢愠卉⁏〹愠摮ㄠ〴挠牥楴楦摥漠敮桔慥瑲湥慨据湩潣灭畯摮猠潨汵敢䤠䍅㘠㌲ㄲ桔桰瘠污敵漠潣灭畯摮猠潨汵敢㜠㠭汅捥牴摯桳畯摬戠畤祬琠獥整湡散瑲晩敩祢䌠剐ⱉ䜠癯⁴景䤠摮慩映牯愠洠湩猠潨瑲挠物畣瑩挠牵敲瑮漠㔲欠⁁浲潦‱敓椠据畬楤杮渠捥獥慳祲戠牯湩景猠極慴汢楤灵潴爠煥極敲敤瑰湩愠祮琠灹景猠楯潦湩敳瑲湩潣灰牥爠摯愠摮映汩楬杮漠档浥捩污湡潰祬瀠慬瑳捩瀠瑩挠癯牥漠慭整楲污潰祬敭潢祤☠挠癯牥搠浩湥楳湯㌠㠰洠䰨 ⁸〳‸浭⠠⥗砠㈠㐱洠䠨 敢牡湩慣慰楣祴㜠㔮吠湯愠灰潲敶牦浯丠䉁⁌灡牰癯摥
㈀ᰃ匀ࠀ界灭猠浵瀠楲散眠牯敫畯⁴潦塅䕔乒䱁䔠䕌呃䥒䥆䅃䥔乏愠楬瑳摥椠捓䄧‧慐瑲䤠ṘḀ㘀ᰀ刀ࠀ界灭猠浵瀠楲散眠牯敫畯⁴潦塅䕔乒䱁圠呁剅匠偕䱐⁙獡氠獩整湩匠档✠❁倠牡⁴䥖䥉3IȈ䰀浵⁰畳牰捩潷歲摥漠瑵映牯䄠䕒⁁剄䥁䅎䕇愠楬瑳摥椠捓䄧‧慐瑲嘠䥉+JȈ䰀浵⁰畳牰捩潷歲摥漠瑵映牯匠坅䝁⁅䥄偓协䱁愠楬瑳摥椠捓䄧‧慐瑲嘠ṉḀⴀᰀ儀ࠀ界灭猠浵瀠楲散眠牯敫畯⁴潦佃偍問䑎圠䱁⁌乁⁄䅇䕔愠楬瑳摥椠捓䄧‧慐瑲堠ṉḀ㐀ᰀ嘀ࠀ界灭猠浵瀠楲散眠牯敫畯⁴潦䕄位䥌䥔乏䄠䑎䐠卉䅍呎䥌䝎愠楬瑳摥椠捓䄧‧慐瑲堠䥉8QȈ䰀浵⁰畳牰捩潷歲摥漠瑵映牯䘠剉⁅䥆䡇䥔䝎匠卙䕔⁍獡氠獩整湩匠档✠❁倠牡⁴䥘䥉2^Ȉ䰀浵⁰畳牰捩潷歲摥漠瑵映牯䄠剉䌠乏䥄䥔乏义⁇乁⁄䕒剆䝉剅呁佉⁎獡氠獩整湩匠档✠❁倠牡⁴䥘ṖḀ䀀ᰀ㼀ࠀ界灭猠浵瀠楲散眠牯敫畯⁴潦䥌呆愠楬瑳摥椠捓䄧‧慐瑲堠ṖḀ∀ᰀ᐀慎敭漠潗歲›䕄位䥌䥔乏传⁆啂䱉䥄䝎⁓ⵔ‴…ⵐ〴⠠䥖䥓佔卒删住⥍䄠䑎䌠乏呓啒呃佉⁎䙏删䝅䵉久䅔⁌䡓偏ⱓਠ呏䕈⁒䕄䥆䥃久⁔呏⁍䍁乃䄠䑎䐠䙅䍉䕉呎传免⁓呁䄠⁆呓呁佉⁎䅊偉剕††††††††††††††††††††††††††††††††††††††††††††⠠䥆䕌丠⹏㠠㌰㔳䔯⤸"䄀剉䌠乏䥄䥔乏义⁇乁⁄䕒剆䝉剅呁佉低畓灰祬愠摮映硩眠污潭湵整䕌⁄潢⁸祴数琠扵楬桧⁴楦瑴湩✴砠㈠地瑡獴椠摮獵牴慩潣浭牥楣污椠瑮牥潩慢瑴湥映牯猠牵慦散洠畯瑮摥湡摯穩摥攠瑸畲敤污浵湩畩潨獵湩Ⱨ栠杩牴湡浳獩楳楴楶祴搠晩畦敳Ⱳ栠杩畬敭畯灴瑵戠硯琠灹楦瑴湩Ⱨ㈠〳瘠汯獴愠摮椠瑮敲牧瑡摥攠敬瑣潲楮牤癩牥挠湯敮瑣牯戠潬正攠捴楷桴眠牡慲瑮⁹灯楴湯漠‵敹牡牦浯搠瑡景椠獮慴汬瑡潩潣灭敬整眠瑩污捡潣獳牯敩湩整湲污祬瀠敲楷敲湡敮散獳牡⁹潭湵楴杮愠牲湡浧湥獴愠摮瀠潲楶楳湯漠
Lump sum price worked out for RETAINING WALL as listed in Sch 'A' Part X
SCHEDULE 'A' PART - XVI MISCELLANEOUS ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.
INTERNAL ELECTRIFICATION
Supply and fix highly efficient LED bulbs, 10 Watt, used as ready replacement for existing GLS/ CFL direct fit lamp in B22 cap complete all as specified and directed.
SEWAGE DISPOSAL
Supply, laying and testing of double wall corrugated (DWC) high density polythylene pipes (HDPE) of 150mm dia and stiffness class-8 (SN-8) as specified in IS 16098-2013 part-2, ISI marked with and including all fittings and jointing material including elastomeric sealing 'O' rings as per manufacturer's instructions complete to make the sewer line functionalcomplete all as specified and directed. Note: (i) Construction method shall be strictly complied as per clause no A-4 of Annex lA of IS 16098 Part II. (ii) The quoted rate shall be deemed to include for laying of pipes level or to falls in trenches etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified. (iii) The quoted rate shall be deemed to include for all necessary extra joints, waste and cutting etc.
EXTERNAL WATER SUPPLY
Material and labour for construction of valve chamber of size 600 x 600 x 600 mm internal dimensions with brick masonry in CM 1:6 with internal plastering in CM 1:6 from the top of surface including cover of MS sheet 3.15 mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting with two coat of synthetic enamel paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement mortar 1:3, foundation using cement concrete type C2 1:3:6, including necessary earthwork complete all as specified and directed and shown on drawing no. CEAA/TD/57.
EXTERNAL ELECTRIFICATION
Supply and laying double wall corrugated (DWC) high density polythylene pipes (HDPE) of nominal outer dia 90 mm and nominal inner dia 76 mm, having corrugation on the outer wall and plain surface on the inner wall confirming to IS:14930 (Part I and II) for protection of underground cables with all fittings laid in trenches/ under roads/ nallah or fixed along walls for cable protection, complete all as specified and directed.
Supply and laying double wall corrugated (DWC) high density polythylene pipes (HDPE) of nominal outer dia 63 mm and nominal inner dia 50 mm, having corrugation on the outer wall and plain surface on the inner wall confirming to IS:14930 (Part I and II) for protection of underground cables with all fittings laid in trenches/ under roads/ nallah or fixed along walls for cable protection, complete all as specified and directed.
Supply and fix 4 Pole MCCB 32 Amps with rotary handle, adjustable thermal magnetic release type, 415 Volts, Ics = 100% Icu, 18 KA breaking capacity fixed in suitable size of 2 mm thick sheet metal enclosure including all fixing accessories and provision of both ends spreader links complete all as specified and as directed.
Supply and fix 4 Pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type, 415 Volts, Ics = 100% Icu, 18 KA breaking capacity fixed in suitable size of 2 mm thick sheet metal enclosure including all fixing accessories and provision of both ends spreader links complete all as specified and as directed.
Supply, fabrication, installation and testing of LT Panel, factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof IP 65 protection, made out of 3.15 mm thick CRCA sheet of suitable size to accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side and provision of suitable bus bar chamber and switch gear compartments for MCCB incoming and outgoing feeders etc. with copper extension links of suitable current carrying capacity not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provision for termination with incoming and outgoing cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminous paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed and including the following accessories:- Note: All extension link/ interconnection shall be insulated with heat shrinkable colour coded sleeves.
DEMOLITION AND DISMANTLING
Taking down sanitary fittings such as wash hand basin and EWC etc. complete all as specified and directed.
Taking down carefully copper/ aluminium submain wiring of any size from surface/ concealed or existing conduit of any height and removing materials to MES store for taking credit complete all as specified and directed.
Taking down old/ unservicable distribution board by disconnection of electric connection carefully, SPN DBs/ TPN DBs/ Main Switch including old servcable MCCBs/ MCBs, isolators etc. and carrying to MES store for taking credit complete all as specified and directed.
Dismantling and taking down electric energy meter of any type and size and carrying to MES store complete all as specified and directed.
Taking out/down unservicable LT UG cable of size 2 core x 10 sqmm from trenches/ pipes/ ducts/ pole complete all as specified and directed.
Taking out/down unservicable LT UG cable of size 3.5 core x 50 sqmm from trenches/ pipes/ ducts/ pole complete all as specified and directed.
FIRE FIGHTING SYSTEM
Supply and fix 3 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend and horn, wall mounting bracket/ floor trolley mounting accessories along with suitable signage complete all as specified and directed.
Supply and fix 4 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683:2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket/ floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed.
Supply and fix 9 litre mechanical foam type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket/ floor trolley mounting accessories along with suitable signage complete all as specified and directed. (In parking area)
Supply and fix 9 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683:2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket/ floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed. (1 No. at entry/ exit)
Supply and fix galvanised mild steel fire bucket (filled with dry sand) conforming to IS 2546: 1974 round bottom type enamel painted, white inside and red outside and letters "FIRE" in black outside and handle with mounting bracket complete as specified and directed.
Supply and fix signage made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board with mirror fasteners complete of size 300 mm X 150 mm reading "EXIT" in 12.5 mm block letters in green and white background, properly spaced to provide good legibility located directly in corridor near to each staircase and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed.
Supply and fix signage made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board with mirror fasteners complete of size 450 mm X 150 mm reading "FIRE EXTINGUISHER" in 12.5 mm block letters in white and red background, properly spaced to provide good legibility located directly in corridor near to each Manual call point/ Fire Extinguisher and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed.
Supply and fix CL#150 rated three-piece design 25 mm NB cast steel (CS) straight pattern ball valve, conforming to IS 9890: 1981 and tested as per BS 6755-1, having cast iron body, stainless steel AISI 304 ball, renewable PTFE seat and gland packing, CS fastners and lever having screwed/ socket weld end connection with accessories complete all as specified and directed.
Material and labour for 1100 Volts grade 3 core, 6 mm² copper conductor, XLPE armoured cable conforming to IS 7098-1: 1988, having stranded aluminium compact shaped conductors as per CI. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/ wire and PVC Type ST-2 outer sheath conforming to IS 5831-1984, icluding necessary clamping/ dressing with cable ties and termination complete all as specified and directed.
Supply and fix PN 1.6 rated air vent valve having brass body, cover, adopter, disc assembly and cap, stainless steel strainer, plastic float and 25 mm screwed threaded ends suitable for maximum operating temperature 100 ˚C installed on all high points in the water piping system to automatically remove the trapped air with necessary accesories complete all as specified and directed.
Supply and fix orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed.
Supply and fix ductable central air cooling unit, of air flow capacity 34000 CMH/ 20000 CFM, 3 phase single speed - AMCA certified DIDW forward curve centrifugal fan with motor, IE3/ IE2, 4 Pole, IP 55, high efficiency honey comb cooling pads, three/ four side, box type HDPE non-woven mesh filter, efficiency 90% down to 10 micron, auto control float valve for continuous water supply, water recirculation pump 50 Watt, cabinet with powder coated GP sheet with extruded aluminium profile framing, cooling pads with large capacity water tank and with following specifications complete all as specified and directed. (i) Discharge type - side (ii) Air flow - 34000 CMH, 20000 CFM (iii) Static pressure - 40 mmwg (iv) Motor power - 9.30 KW (v) Main power - 415 Volts, frequency - 50 Hz (vi) Fan type/ fan speed - Centrifugal blower, 3 Phase, single speed (vii) Noice level - less than 70 dBA (viii) Water tank capacity - 700 Litres (ix) Controller type - Manual Knob Controller (x) Evaporation efficiency - 80%
Supply and fix electric controller with 2 meter 4 core copper wire with 415 Volts, 50 Hz, starter equipped with MCCB/ MPCB, contactor, start and stop push button, protection with electronic overload relay, single phase preventer and short circuit protection complete all as specified and directed.
Supply and fix aluminium powder coated air grills without damper complete all as specified and directed.
Supply and fix flexible canvas connection complete all as specified and directed.
NOTE: Amount of credit of Rs. 5,38,887.00 for retrieved materials is mentioned in schedule of credit of tender documents in pdf form which will be deducted offline while acceptance of tender.
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.06 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.18 MB
09to13.rar
Additional Documents • 26.16 MB
14to5R.rar
Additional Documents • 23.09 MB
06Rto23R.rar
Additional Documents • 11.32 MB
BOQ_812452.xls
BOQ • 4.28 MB
80335uploading.rar
Tender Documents • 2.00 MB
01to04.rar
Additional Documents • 24.83 MB
05to08.rar
Additional Documents • 25.91 MB
doc04499220251017144627.pdf
PDF • 0.36 MB
80335.pdf
PDF • 0.32 MB
doc04421120250929200001.pdf
PDF • 0.35 MB
doc04391820250920154529.pdf
PDF • 0.34 MB
doc04350520250909191410.pdf
PDF • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .