E-Quotation for SITC of VT pump set at intake well Bhalki MVR pipe ws scheme and SITC of HSC CF pump set allied works at WTP Bhalki MVR pipe WS scheme Under D.W S Mech. Div jsr.

(A) Intake well (Raw water pumping plant)Supplying, Installation, testing and commissioning of water lubricated single or multistage, Radial/Mixed flow Vertical turbine pump(make-Kirloskar /Jyoti/WPIL / WILO Mather & platt) having discharge of 45 m³/hr against a total head of 72 meters consisting of pump bowl assemblies with dynamically balanced bronze impeller , stainless steel pump shaft , S.S. line shaft 1.5 mtr length each , 60 feet MS fabricated flanged type column assembly , strainer, non- reverse rachet coupling and discharge head etc. coupled with suitable Vertical hollow/solid shaft -IE3 energy efficient SPDP Squirrel cage induction motor (Kirloskar/ Jyoti/ CGL make) confirming to IS 12615:2011 with latest amendments having 10% more BHP than that of Pump operating on 3-PH, 50Hz, 415 ± 10%, 1450-1500 rpm with required size of ISI marked heavy duty CIDF sluice valve & CIDF NR valve , Pressure gauge, MS clamp including cost of construction of new foundation with suitable size of nut ,bolts and packings etc. all complete or as per site requirement or direction of E/I.

Cost towards supplying, Installation, testing & commissioning of free standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper busbar arrangement 4 pole consisting of following accessories: (i) 200 Amp MCCB – 1 No. (Incoming feeder) (ii) 100 Amp MCCB – 02Nos (outgoing feeder). (iii) 100 Amp MCCB – 01No. (As spare) (iv) 32 Amp MCB -1 No. for lighting load and other utility load. (v)Fully Automatic Star Delta (FASD) Starter (L&K/Havell’s/Siemen’s/Schneider/BCH make) suitable for Above pump set or more etc.- 2 Nos. (vi) 3-phase Digital display Voltmeter & Amp Meter -2 Sets, Phase indicating light R-Y-B -3 Nos. (vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant.

Cost towards making and fitting of MS Common Header 200 mm with suitable Blind Flange for both ends of MS Common Header.

Cost towards supplying and laying of 3.5 core 95 sq.mm aluminium armored cable from transformer to MCP (Motor Control Panel).

Supplying, laying and fitting of 25 sq. mm x 3 core X 1.1 KV grade with ISI mark XLPE/PVC insulated and unarmored flexible copper Cable from MCP to motor terminal box with suitable copper thumble socket etc.

Cost towards breaking of old PCC foundation and removing of all residuals from pump house to outside with lead of 200m with all tools and tackles complete job and lifting of old 20HP VT pump set with column pipes, line shafts etc. from intake well including all labours, tools and tackles etc. all complete.

Chemical earthing 3 meters and 80mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangements including soldering, riveting, jointing G.I. flat strip 50mm X 6mm to all equipments or as per direction of E/I

Supplying and fitting of lightening arrester suitable for building protection with Earthing Electrode, Earthing Compound, copper wires and earth work etc. all complete job or as per direction of E/I

Supplying and fitting of 90watt LED street lighting luminaire with pressure die cast housing and toughened glass cover, operating voltage range 100V-270V AC with structure, stand, clamp, tee, wires and switches etc. all complete

Supplying and fitting of 415volt S-D-F FN 200 Ampere TPN main switch and SS enclosure suitable for DIN Fuse link with HRC fuses make L&K/ Havells/C&S with all Labour & tools and materials installing at pump house

Renovation of light wiring inside and outside of pump house by doing short point light wiring, long point light wiring as per requirement, 35watt CFL- 02 Nos etc. All complete work including all labour charges.

(B) WTP (Clear water pumping plant)Cost towards supply, installation, testing, commissioning and of Horizontal split casing type centrifugal pump Make- Mather & Platt/ Kirloskar /WPIL/Jyoti capable of discharging - 45 m3/hr. clear water against total head 90 meters, coupled with suitable 3 phase, 1450 RPM, 50 Hz TEFC sq. cage induction motor Make-Kirloskar/CGL/ ABB/Jyoti mounted on a common M.S. channel fabricated base plate with following accessories- 1. Suitable size N.R. Valve-01 No. 2. Suitable size sluice valve-01 No. 3. Suitable size Check valve/Foot Valve-01 No. 4. Pressure gauge -01 No. 5. M.S. Base Plate-01 No. 6. Tyre coupling set-01 No. etc. all complete.

Supplying, Installation and commissioning of 200 Amp,440 Volt Motor Panel Board made of 2mm thick sheet of suitable size, dust and vermin proof consisting of following accessories: (i)200 Amp MCCB – 1NO. (Incoming Feeder) (ii)125 Amp MCCB – 2 NOS. (Outgoing Feeder) (iii)125 Amp MCCB-01 No. (As Spare) (iii)32 Amp MCB- 01 NO. for lightening load and other utility load. (v)Fully Automatic Star Delta (FASD) Starter (L&K/Havell’s/Siemen’s /BCH make) suitable for above HP pump set or more etc.- 2 Nos. (vi)3-phase Digital display Voltmeter & Amp Meter-2 Sets, Phase indicating light R-Y-B-3 Nos. (vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant.

Cost towards supply installation and testing of single stage centrifugal Backwash pump of Make- Mather & Platt/ Kirloskar /WPIL capable of discharging -9 LPS. Head range-12 mtrs. to 19 mtrs. ,Duty point head- 16 meters, Size of Pump-80x65 mm, Pump Eff.- 65%, coupled with suitable -3 phase, 2840 RPM, 50 Hz, TEFC sq. cage induction motor Make-Kirloskar/ CG/ ABB mounted on a common M.S. channel fabricated base plate with following accessories- 1. Suitable size N.R. Valve - 01 No. 2. Suitable size sluice valve - 01 No. 3. Suitable size Check valve/Foot Valve-01 No. 4. M.S. Base Plate-01 No. etc. all complete.

Dismantling of old Foundation and removing the residuals out of the pumping plant and making of new PCC foundation 2.5’X2’X2’ size and MS joint 4’’X6” -02 Nos with supplying all mortar materials and foundation bolts 06 Nos with all labour tools and tackles loading unloading with alignment leveling and jointing as per P.W.D specification (1:2:4) Etc. at WTP in Filter Unit all complete.

Dismantling of old Foundation and removing the residuals out of the pumping plant and making of new PCC foundation 4’X3’X2.5’ size and MS joint 4’’X6” -02 Nos with supplying all mortar materials and foundation bolts 06 Nos with all labour tools and tackles loading unloading with alignment leveling and jointing as per P.W.D specification (1:2:4) Etc. at WTP campus clear water pumping plant all complete.

Cost towards installation of above pump set connecting suction 80mm Dia MS pipe -50ft with flange 80mm Dia- 06 Nos, MS Bend – 80mm Dia- 01 No. Nut Bolt, Rubber insertion, paints, cutting and welding charges etc. with all labour and tools & tackles. complete job.

Supplying, installation, testing and commissioning of 0.75HP suitable 3 phase, 1400 RPM, 50 Hz TEFC sq. cage induction motor Make-Kirloskar/CGL/ ABB/Jyoti/Havells mounted on inline Helical Gear Head (IBC 128: 47.6: 200-19) system suitable for mixing alum/lime in chemical mixture tank with all necessary arrangements. Complete set.

Supplying, installation, testing and commissioning of 1.5KW suitable 3 phase, 1400 RPM, 50 Hz TEFC sq. cage induction motor Make-Kirloskar/CGL/ ABB/Jyoti/Havells mounted on M.S. channel fabricated base plate coupled with Gear-pinion system (Gear ratio 50:1, RPM 1500,1.47KW) used in flocculator With all necessary arrangements. Complete set.

Supplying and laying of 6 sq. mm x 3 core X 1.1 KV grade with ISI mark PVC insulated and unarmored flexible copper Cable from MCP to Backwash motor terminal box with suitable copper lugs socket etc. work for new Backwash motor, Alum/Lime mixture motor & flocculator motor etc. at filter unit.

Cost towards s/f of DOL starter suitable for operating of 3HP backwash Pump Motor having relay range 7-10 Amp., working on 415 Volt,50 Hz. with relay contact, On-off Push buttons. Make-Havells/C&S/L&T make. (3 H.P. DOL satarter)

Cost towards s/f of DOL starter suitable for operating of 02 HP single phase, 1415 RPM, 50 Hz, 1.5 kW, Duty S1, Effn-80%, Sq. cage induction motor having relay range 13.2-20 Amp., working on 215 Volt,50 Hz. with relay contact, On-off Push buttons. Make-Havells/C&S/L&T make. (2 H.P. DOL satarter)

Supplying and fitting of 415volt S-D-F FN 63 Ampere TPN main switch and SS enclosure suitable for DIN fuse link with HRC fuses make L&K/ Havells/C&S /HPL with all Labour & tools and materials installing at filter unit.

Supplying and fitting of 415volt S-D-F FN 32 Ampere TPN main switch and SS enclosure suitable for DIN fuse link with HRC fuses make L&K/ Havells/C&S /HPL with all Labour & tools and materials installing at filter unit.

Renovation of light wiring inside and outside of pump house and filter unit by doing short point light wiring, long point light wiring with 14’’×4’’ PVC board-05 nos., 2.5 sq mm copper pvc insulated wire 90 m, five pin socket-05 nos., on-off switch- 25 nos, fuse 05- nos, indicator- 05 nos. 1.5’’ upvc wiring pipes-90m, 32amp MCB- 01 nos. with board , saddle, board for holder- 2.5’’×2.5’’- 10 Nos. bulb holder- 10 nos. as per requirement, 35watt CFL- 02 nos. and LED bulb 10- Nos etc. All complete work including all tools, tackles and labour charges.