PROVN OF 150 METER SECURITY WALL WITH SWAN NECK WITH BARBED WIRE IN EME WORK SHOP UNDER AGE BR II AT FAIZABAD

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. in soft/loose soil and getting out, complete all as specified and directed.

M&L for Plain cement concrete type D-2 1:4:8 using ( 40mm graded crushed stone aggregate) as in foundation laid and well rammed ,complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of Cement base paint over a coat of alkali resistant perimer ,complete all as specified and directed.

Surface dressing n exc 15 cm deep getting out in soft/loose soil, complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-1 ( Using 12.5 mm graded crushed stone aggregate ) as in coping, Gola etc including form work , complete all as specified and directed.

M & L for Broken glass coping on top of walls fixed in and including cement mortar 1:3 complete all as specified and directed.

S&F Mild steel work as in posts struts in fencing including cutting tops to shape as directed, drilling holes, notching of wire etc, flat iron fillet (for securing wire etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 , complete all as specified and directed.

M&L Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pins etc complete all as specified and directed

Removing excavated (soil), material to a distance n.exc 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M&L for returning filling in soft/loose soil, incl spreading levelling watering and well ramming in layers n exc 25 Cm all as specified .

M&L Preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with ornamental looks, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ,complete all as specified and directed with Fe 410-W (Gde E-250).

S & F concertina coil fencing with punched taps concertina coil 600mm dia, having 60 nos round per 10 m length , spring core wire (2.5mm thick ) of high tensile strength of 145 to 165 Newton per Sq. mm,(Reinforced Barbed Tape ) wire ,stud tied with G.I staple sand G.I clips to retain horizontal , including necessary bolts, complete all as specified and directed.

Saket Traders

KRISHNA BUILDTECH