Electrification for modify NA-II quarters to Inspection quarters-II at Kanyakumari Lighthouse

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

8 Module (125mm * 125mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

Two way 5/6 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing PVC batten/ angle holder including connections etc. as required. (fancy type)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & Switch box excluding modular plate as required

Installation, testing, Commissioning of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete all connections including connections etc, as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of Exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required

Upto 450mm Sweep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm(for Lamp Holder)

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole 10A

Single pole 20A

Supplying and fixing following rating, four pole, 415 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1Kv grade of the following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

upto 35 SQ.mm

Providing, laying and fixing the following dia G.I. pipe (medium class) in ground complete including trenching (75 cm deep)and re-filling etc as required (for CC road crossing)

100mm dia

Supply of Indoor Industrial LED Batten 36 Watts 1150 mm. (refer Sl No. 19 for installation)

Supply of 12W round LED Recessed Luminaire operating 140V to 280 V at 50 Hz AC / SMD LED Chip as per LM 80/IS16106 (refer Sl No. 18 for installation)

Supply of 24W Square LED Recessed Luminaire operating 140V to 280 V at 50 Hz AC / SMD LED Chip as per LM 80/IS16106 (refer Sl No. 18 for installation)

Supply of 22W Square LED Surface mounted Luminaire operating from 100v 50Hz supply (refer Sl No. 18 for installation)

Supply of 30W LED flood/focus Light of IP65 suitable for out door purpose. (refer Sl No. 19 for installation)

Supply and fixing of LED type 700mm dia multi colour hanging type Classic chandeliers of 50 Watt suitable fixing at middle of the hall

Supply of 200mm sweep exhaust fan suitable for bath rooms and kitchen (refer Sl No. 21 for installation)

Supply of 1200mm BLDC decorative ceiling fan 5star rating with remote control for speed regulations. (refer Sl No. 20 for installation)

Supply and laying of 4 core X 10 sq.mm Copper armoured PVC insulated/PVC sheathed XLPE power UG cable as required. ( Laying from Pump room to IQ) (refer Sl No. 38 for Laying)

12W Wash Basin Cum Mirror Light (refer Sl No. 18 for installation)

Supply of LED LAMP 10W(Base B22 10-Watt LED T Tube)

Supply and fixing on wall 4pole sheet metal type powder coated MCB Gang box suitable to fix 4pole 63A Isolator at Pump room.

Supplying and drawing of 4 core x 10 sq.mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required for incomer connections.

Supply and fixing of Single module modular indicator operating 230V/50Hz supply.

Fixing of 6 way TPN double door vertical, distribution box in recessed by cutting and breaking the black stone Masonry and plastering etc as required

Supply and Fixing of single pole 16A C curve Modular MCB in existing 2M / single metal box and plate for Air conditioner.

Supply of Bare Copper wire, 8 SWG earth wire.(refer Sl No. 37 for installation)

Labour charge for laying 8 SWG wire from ground level to Distribution box through pvc pipe recessed.

Supply and Installation of multi Musical call bell with flash light.

Supply of decorative wall mounting type fancy light fitting (refer Sl No. 18 for installation)

Supply of High contrast IP65 water proof out door rope Light suitable for false ceiling decorations. (refer Sl No. 64 for installation)

Charges for connections Laying of rope light in the existing cavity on the false ceiling

Supply of 4Module LED foot light (refer Sl No. 18 for installation)

supply of 1/2" flexible hose for ceiling Lights

Black stone cutting charges for laying the PVC pipes and switch boxes for concealed wiring as buildings are constructed by black stone

Charges for making 10.5" square hole on black stone masonry wall for fixing of Exhaust fan

Core cutting charges for making 4" hole on black stone masonry wall of installation of air conditioners in Hall, Bed room 1 & Bed Room 2

Making earth pit charges(additional) of Sl No.16 due to the site located near beach area and sand area difficult to digging earth pit (take out water and labour charges)

Charges for removing the existing wiring, Light fittings, fans etc and handed over to Incharge of Lighthouse.

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, cable ties, 25mm PVC bends, tees, 1,2,3,4 way junction boxes, Fan rod for extension, SS Clamp, PVC insulation tape etc.,

Fairway Marine Services

SHAN POWER SYSTEM