Repair/Replacement of internal wiring and light at MD and OTM Accn at AFS Amla

Amount

Taking down carefully copper/aluminium point wiring i.e. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surface of ceiling, wall, floors, etc.

M&L for point wiring using approved colour coding as per IS with 1.5 sqmm two single core PVC insulated but unsheathed FRLS cable, 1100 volts grade, ISI-694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 Sqmm cable (including connecting to earth dolly) drawn through ISI Marked heavy duty rigid PVC concealed conduit with all accessories etc with mild steel sunken box duly,concealed in wall and having PVC modular cover plate with frame suitable for modular switch/Sockets/regulators for the following :-

One light / fan controlled by one switch one way.

One light point controlled by two 2 way switches

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell/ buzzer point controlled by one bell push

All as per item No : 03 but for point wiring with 2.5 Sqmm two single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

M&L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm 1100 voilts grade cable FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- Note: Circuit conductor from MCB DB to Switch boards should not be less than 2.5 sqmm.

One light/fan point controlled by one No one way switch

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell / buzzer point controlled by one bell push

All as per item No : 5 but point wiring with 2.5 Sqmm two single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

2 runs of 1.5 Sqmm size main cable and one run of 1.5 Sqmm size earth continuity conductor

2 runs of 2.5 Sqmm size main cable and one run of 2.5 Sqmm size earth continuity conductor

2 runs of 4 Sqmm size main cable and one run of 4 Sqmm size earth continuity conductor

2 runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor

S&F in Replacement with ceiling rose with earth terminal connection, 3 terminal/PVC/Polycarbonate, isolated body of size 60 x 50 mm

S&F in replacement with modular electric bell ding dong, AC, 230V single pole.

S&F in replacement with modular switch, 1 module, single pole one way 6 Amp conforming to IS:3854 and ISI marked complete all as directed.

S&F in replacement with modular switch, 1 module, single pole one way 16 Amp conforming to IS:3854 and ISI marked complete all as directed.

S&F in replacement with module socket 6A, 3 pin, 2 module conforming to IS:1293: 2019 and ISI marked complete all as directed.

S&F in replacement with modular socket 6/16A, 3 pin, 2 module conforming to IS: 1293 : 2019 and ISI marked complete all as directed.

S&F in replacement with modular bell push switch, 1 module, single pole one way 6Amp ISI marked.

S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way ISI marked.

S & F in repair highly efficient LED retrofit Lamp 09 W used as a ready replacement for existing GLS/CFL all as specified and as directed. Make: LED Adore 9w of Havells or equivalent in Crompton/Bajaj

Supply and Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F surface mounted modular PVC Gang box, of 8 module for mounting of modular switches and sockets including blank plate for blank module.

All as per item No - 18.00 above but of modular surface mounted PVC gang box, 6 module.

All as per Item No - 18.00 above but of modular PVC Gang box, 3 module.

All as per Item No - 18.00 above but of modular PVC Gang box, 2 module.

All as per Item No - 18.00 above but of modular PVC Gang box, 1 module.

S&F modular white cover plate with frame, 8 module

S&F modular white cover plate with frame, 6 module

S&F modular white cover plate with frame, 3 module

S&F modular white cover plate with frame, 2 module

S&F modular white cover plate with frame, 1 module

S&F in repair for wall mounted LED 8W/10W CRCA fitting 230 V with extruded aluminium heat sink provided for efficient heat dissipation and integral LED rod, electronic driver and connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multistranded copper conductor of size 0.5 sq mm from ceiling rose to fitting including necessary LED polycarbonate tube 2FT 8W complete all as specified and directed. Make:- Cat no SZSLAMX010 of Shakti or equivalent in Crompton/Bajaj/ Havells

S&F in repair for wall mounted LED 18/20 W CRCA fitting 230 V with extruded aluminium heat sink provided for efficient heat dissipation and integral electronic driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multistranded copper conductor of size 0.5 sqmm from ceiling rose to fitting including necessary polycarbonate LED tube 4 feet, 18/20 W complete all as specified and directed. Make:- Cat no SZSLAMX020 of Shakti or equivalent in Bajaj/Havells/Crompton

S&F in repair for suspended type 4FT 36/40W LED fitting linear in sleek design 230 V with integral electronic driver connector block etc. complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 0.5 sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make: - Cat part no SZWXPMX040 of Shakti or equivalent in Crompton/Bajaj/Havells

S&F in repair decorative recess mounted luminaire 34/36 Watt LED suitable for 600 mm x 600 mm recess which provides glare free cool white symmetrical illumination and having integral electronic driver connector block etc. complete & necessary mounting arrangement , provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No LCTLRNE-36-FO-CDL of Crompton or equivalent in Bajaj/Havells/Shakti

S&F in repair decorative recess mounted luminaire 18-Watt LED, round shape and having integral electronic driver connector block etc. complete & necessary mounting arrangement, provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No BGSLO SLEEK 18W WH RD of Bajaj or equivalent in Crompton/Havells/Shakti

S&F in repair decorative Surface mounted 18W LED luminaire round shape with PDC Aluminium housing & high translucent frosted plastic diffuse and having integral electronic driver connector block etc. complete & necessary mounting arrangement , provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat No BGSLO SLEEK SURFACE 18W WH RD of Bajaj or equivalent in Crompton/Havells/Shakti

S&F in repair for environment friendly high efficiency with better thermal management type building security light 24/25Watt with integral electronic driver connector block etc. complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 1 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No SZPSLMM024 of Shakti or equivalent in Bajaj/Crompton/Havells

S&F in repair GI pipe bracket bent to shape drilled / welded made out of 20 to 40 mm dia bore light grade GI Pipe 0.9 metre long for fixing of building security light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of Aluminium paint over one coat of red oxide primer complete all as specified and directed.

Suply and fixing in repair LED decorative post top lantern fitting 25W, 230V AC integral pole mounted with spherical shaped polycarbonate diffuser and weatherproof IP 65 protection and resistant to impact and corrosion with necessary electrical connection complete all as specified as directed. Make: Cat No BLPTSP 25W LED WW of shakti or equivalent model in crompton greaves/Havells / Philips

Supply & fix in repair decorative cylendrical shaped energy saving LED Bollard light fitting 08 to 10 watt (including 9w/10w LED bulb) 600mm long pressure die cast powder coated housing with diffuser with integeral electronic driver connector block etc complete with all accessories internally prewired with neccessary mounting arrangement complete all as specified and directed. Cat Part No SZP-GBMX009-C of shakti or equivalent.

S&F in repair Surface mounted 15/18 watt LED slim panel light, square shape with PDC Aluminium housing & high translucent frosted plastic diffuse and integral electronic driver connector block etc. with all accessories internally prewired including necessary mounting arrangement complete all as specified and directed. Make:- Cat no BGSLO SLEEK SURFACE 15W WH SQ of Bajaj or equivalent in Crompton/Havells/Shakti

Supply & fix in repair RGB 18 watt LED under water light with all accessories and mounting arrangement for under water purpose complete all as specified and directed. Make:- SZLFUMX018 or equivalent in Crompton/Bajaj/Havells

S&F in repair Environmental friendly, new generation, energy saving, decorative 7W/9W spike light using COB LED as light source and PDC Aluminium housing high translucent frosted plastic diffuser and integral electronic driver connector block etc. including all accessories internally prewired including necessary mounting arrangement complete all as specified and directed. Make: - Cat No BGSBL 9W LED WW of Bajaj or equivalent in crompton/Havells/ Shakti

Supply & fix in repair decorative wall mounted energy saving red & Green Light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories complete all as specified and directed. Make:- Any ISI marked make approved by GE

Supply & fix in repair wall mounted energy saving 20 watt LED Spot light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories complete all as specified and directed. Make:- SZSTCMX020 of Shakti or equivalent in Bajaj/Crompton/Havells

S&F in repair for MCB DB TPN 4 way double door sheet metal enclosure comprising of OEM/manufacturer specified bus bar 415 volts, 50 Hz bus bar and neutral link complete including inserting in wall complete all as specified.

S&F in repair for MCB DB VTPN 4 way double door sheet metal enclosure comprising of OEM/manufacturer specified bus bar 415 volts, 50 Hz bus bar and neutral link suitable for MCCB incomer & MCBs outgoing complete including inserting in wall complete all as specified.

S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete to fixtures all as specified.

S&F in repair for MCB DB SPN 08 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete to fixtures all as specified.

S & F in repair MCCB 4 pole 415 Volts, 63/100 Amps, 16 KA

S&F in repair MCB triple pole and neutral 415 Volts, 63 Amps, 10 KA.

S & F in repair 'C' curve MCB SPN 240Volts 32/40 Amp.

S&F in repair 'C' curve MCB SP 240 volt 6 to 30 Amp.

M&L in repairs for Design, Supply, install, test and commissioning of free standing floor mounted, dust and vermin proof LT cubical panel outdoor type, fabricated with 3 mm thick CRCA MS sheet for load bearing members and 2mm thick for doors and covers as per IS-5039/1983, supplied by CPRI approved panel manufacturer, with aluminium bus bar of size 200 Amps for phases and half natural mounted on insulators MS sheet shall be painted with epoxy powder paint by means of electro static gun after rigorous per treatment comprising of cold phosphating process on all internal and external surface after due preparation of surfaces. The panel shall be provided with double stud hinged door, front openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 cycles, AC supply and to with stand short circuit fault level of not less than 10KA and degree of protection shall be IP 54. The panel shall be fixed with angle iron frame made of angles of size 50 x 50 x 6mm, embedded 200mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following: -

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Paragon Electrotechnics (BID ID -3087565)