15TH FINANCE COMMISSION 2025-2026 TIED GRANT IInd ALLOTMENT

Amount

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification. i) Square Column

ii) Grade Beam

iii) Side Wall

6) Supplying, fabricating and placing in position TMT steel Bar for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials)

8) Cement concrete of mix 1:2:4 (One cement Two sand Four aggregates) using 20mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 83/4"x41/4"x23/4" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Painting the new walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M50 grade 80mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Charges for conducting Geophysical survey to locate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc complete complying with standard specification.

Drilling 150 mm” dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the casing pipe etc complete as per standard specifications

Supply and delivery of 1PVC CASING PIPE AS PER IS 12818 / 2010 inculding all charges etc., complete. 150mm CM Pipe

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. Thepump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150M (100Lpm x125m)

Supply and delivery of GI Pipe and Pipes Special including all charges etc., 4 Sqmm Submersible cable

50 mm GI Pipe (B Class )

50 mm GI coupling

50 mm GI Elbow

50 mm GM non return valve

50 mm GI Hex Nipple

50 mm dia Flange set

50 mm dia Bore well m.s clamp

180 mm dia Bore well Cover

63 mm dia PVC MTA

63mm dia PVC Elbow

63 mm dia PVC Pipe 6kg/m2

63 x 90 mm dia PVC Reducer

25 mm dia PVC Wiring Pipe

Labour charges for the erection of submersible pump set in Borewell including fixing Jointing submersible cable with proper clamps up to starter to required depth and also fixing of riser pipe to the recquired depth including errection of clamps, presure gauge up to exterear wall of pump room and erection of pannel board consisting of TPICN Switches, starter, volt meter, Ammeter, three Pilot indicating lamps Capacitor single phasing preventer water leavel guard and laying and joinding of cable and twin earthing as per IE rules etc., and testing the pumpset and trail run of ten days. up to 7.50 HP. TWAD page no 308

K.AVUDAIYAPPAN (BID ID -1476491)

M MAMUNDI (BID ID -1476072)

Periyasamy P (BID ID -1476352)

BABUNATHAN AND CO (BID ID -1475723)