PROVISION OF PARKING SHED FOR INFRASTRUCTURE FOR BASING OF P8I AIRCRAFT AT INS HANSA GOA UNDER GE P VASCO

Amount

Excavation in ordinary rock by Mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil within a lead of 50m all as specified and as directed.

Returning, filling in including spreading ,levelling , watering and well ramming in layer not exceeding 25 cm thick for soft/disitegrated rock all as specified and as directed.

M&L for PCC D2 type, 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for RCC M-30 using 20mm graded stone aggregate as in foundation , beams , plinth beams, bases for columns etc. basement slabs, under reamed piles and mass concrete all as specified and as directed.

M&L for RCC M-30 using 20mm graded stone aggregate as in columns , pillars , piers , posts and struts all as specified and as directed.

M&L for RCC M30 using 20mm graded stone aggregate as in beams , cantilevers , bressmmers , lintel over 1.5m span & Chajjas all as specified and as directed.

M&L for RCC M30 using 20mm graded stone aggregate for slab supported on walls, beams and columns in floors, roof, landings , balconies, canopies, deck slab and in shelves and the like all as specified and as directed.

M&L for RCC (design mix) M30 using 20mm graded stone aggregate in walls, retaining walls, basement walls, ballast walls and the like of any thicknesss all as specified and as directed.

M&L for CRS TMT Bars 10mm dia and over cut to length bent to shape required ,including cranking , bending spirally for hooping spirally for columns , hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for CRS TMT Bars 8mm dia cut to length bent to shape required ,including cranking , bending spirally for hooping spirally for columns , hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for CRS TMT Bars 5mm dia and over upto including 10mm dia as in stirrups/ spacers and binders all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings , bases of concrete foundations, bases of columns, raft and raft beams, sides and soffits (if any) for rough finished surfaces all as specified and as directed.

M & L for use and waste of form work to sides of pillars , posts , struts , piers , columns and stanchion for rough finished surface all as specified and as directed.

M & L for Use and waste form work to sides and soffits of floor or roof beams , beam haunching , girders , brssumeres , lintels, cantilever shelves including supports, over hangs etc all as specified and as directed.

M & L for Use and waste of form work of suspended slab such as roof slab, Floor slabs, landings and similar work, not exc. 200 mm thick ( Horizontal or sloping) all as specified and as directed.

M & L for Use and waste of form work to flat faces of walls, retaining walls, abutments, vertica walls etc all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks in cement concrete 1:3:6, type C5 exceeding 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm thick plaster (10+5) in cement mortar 1:4 second layer mixed with water proofing compound and finished even and fair without using extra cement all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 including finished even and smooth without using extra Cement all as specified and as directed.

M&L for rendering 5 mm thick on fair faces as in ceiling in cement mortar 1:3 and finish the surface even and smooth all as specified and as directed.

M&L for preparation of wall surface and applying two coats of weather coat paint over a coat of primer all as speciied and as directed.

M&L for preparation of concrete surface and applying three coats of white wash on walls all as specified and as directed.

M&L for preparation of concrete surface and applying three coats of white wash on ceiling all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on concrete roof surface with using water proofing compound all as specified and as directed.

Supply only Integral water proofing compound all as specified and as directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface for laying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) by forced application complete all as specified and as directed.

M & L for spreading and levelling in layers using approved earth and not exc 25cm thick filling under floors and rammed including watering all as specified and as directed.

M&L for hard core with broken stone or boulders of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to true surface all as specified and as directed.

M&L for cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate 100 mm thick as in sub base all as specified and as directed.

M&L for cement concrete type B1, 1:2:4 using 20mm graded stone aggregate 50 mm thick all as specified and as directed.

M&L for cement concrete type B-1,using 20mm graded stone aggregate 40 mm thick and finishing the concrete surface even and smooth without using extra cement all as specified and as directed.

M&L for providing dry river sand as in sand cushioning under paver block including consolidation and punning down sand in layers all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006, 80 mm thickness M-40 grade including finishing glossy or mat all as specified and as directed.

Internal Exterification

Material and labour for point wiring with PVC insulated unsheathed FRLS stranded copper conductor cable of size 1.5 sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less than 25 mm dia concealed in walls/roof/floors with MS sheet metal sunken modular switch/Terminal box 1.2 mm thick and modular plate and brass screws with cup washers for one light point controlled by one way switch complete all as specified and as directed. Note : Rate is inclusive of cutting/chases of wall/floor/ceiling.

S & F modular switch piano flush type single pole one way 5 Amps all as specified and as directed.

S & F 6 way modular white cover plate with frame all as specified and as directed.

S & F 6 way modular metal flush box all as specified and as directed.

S & F ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and as directed.

S & F LED tube light fittings decorative ultra slim linear fixture with extruded aluminum heat sink environmental friendly Energy efficient ready to use pack, 1 x18/20 watt, 4 feet, surface mounting type extruded PVC, Snap on installers and domestic electronic Driver, connector block etc, with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75 x 75 mm- 02 No's etc all as specified and as directed.

S & F LED security/street light fittings 15 watt wall mounting type extruded metal/aluminium body and electronic LED driver etc with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size etc all as specified and as directed.

Supply & fix GI pipe bracket 25 mm dia 0.9 m long & 2 set of clamps made out of 30 x 5 mm MS flat & fixed with anchor bolt suitable for 15 W security light fittings all as specified and as directed.

M & L for submain wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 single core of size 2.5 sqmm, earth continuity conductor of size 2.5 sqmm to be drawn through in and including PVC conduit fixed on walls/roof/floors all as specified and as directed. Note : Two run of 2.5 sqmm, one run of 2.5 sqmm and one run of PVC conduit shall be measured as one unit

M & L for MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and din rail, 230 volts SPN with 4 way double door IP -43 – IK 09 protection grade all as specified and as directed.

M & L for MCB SPN 215 volts, ‘C’ series, breaking capacity 10 KA of rating 32 Amps (for lighting DB) all as specified and as directed.

M & L for MCB SP 6-32 Amps , ‘C’ series, breaking capacity 10 KA, 240 volt of rating all as specified and as directed.

Chauhan Construction

M/S. M M S ENTERPRISES

M/S jvsr constructions

Tara Construction