Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC A 95 SANJAY NAGAR BHARATPUR RAJ 321001 | BHARATPUR | BHARATPUR | RAJASTHAN | 321001 | L1 | Accepted-AOC L1 quoted | |
| 2 | L2₹25.0 L+₹1.0 L (4.18%)Rejected-AOC | L2 | Rejected-AOC L2 quoted | |
| 3 | L3₹26.3 L+₹2.3 L (9.54%)Rejected-AOC H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L3 | Rejected-AOC L3 quoted | |
| 4 | L4₹28.9 L+₹4.9 L (20.5%)Rejected-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | MOHALI | SAS NAGAR | PUNJAB | 160059 | L4 | Rejected-AOC L4 quoted | |
| 5 | L5₹29.9 L+₹5.9 L (24.5%)Rejected-AOC | L5 | Rejected-AOC L5 quoted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Chandigarh
GE (AF) Chandigarh, AF Stn Chandigarh PIN-160003
WELCOME MAINT AND MISC B/R REPAIR TO OMQS AT SECTOR 31-B AND 31-C AT AF STATION CHANDIGARH UNDER GE (AF) CHANDIGARH
2022_MES_522933_1
GE(AF)/CHD/T-01/2022-23
Open Tender
Civil Works
Item Rate
183 days
Chandigarh
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) Chandigarh
₹80,000
Yes
3 Aug 2022
9 May 2022
13 Jun 2022
9 May 2022
6 Jun 2022
23 May 2022
9 May 2022 - 17 May 2022
60 days
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise, complete all as specified.
Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified.
M&L for 25 mm thick, PCC (1:2:4), type B-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified.
M&L First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.
M & L for glazed ceramic (digital glossy finish) coloured tiles 350x450x8 mm thick, joint free on vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, Complete all as specified and directed by Engineer-in-Charge.
M & L for Vitrified ceramic coloured tiles, dark shed, 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.
All as per item no 06 but as in dado/skirting over 10mm thick cement plastering in Cement mortar 1:4, complete all as specified and as directed.
M & L for Granite (of any type) 16-18 mm thick, work (table rubbed and polished) fine grained 'Z' black/red in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in cement mortar 1:3, complete all as specified.
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified.
Demolition of brick masonry in any position built in any cement mortar, complete all as specified.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, complete all as specified.
All as per item No.11 above but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 10 here-in-before shall be used after proper washing.
M&L for rendering 15 mm thick on brick on concrete surface (Chajja, Beam, Balcony, facia, staircase) in cement mortar (1:4) mixed with water proofing compound @200 ml per bag finished even and smooth without using extra cement over and including complete all as specified. Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 Mtr height building. 2.The rate quoated by contractor include for water proofing compund and nothing shall be paid extra.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 3.50 Mtr height building.
M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top,bottom of chajjas, balcony ceiling,roof slab etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 Mtr height building.
Material and labour preparation of new plastered surfaces and apply two coat of oil bound distemper over 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed.
M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty including rubbing down and stopping of surfaces using sand paper and applying one coat of oil bond distemper complete all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying 1mm thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of oil bond distemper, complete all as specified and directed.
M&L for preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. Note For Srl Item No. 20 to 26 :- The rates quoted against those items shall being to be included for the use of scafolding, ladders, cradles etc, removing nails, making good holes, cracks etc removing furnitures, cub boards, washing floors, floor and wall tiles, cleaning glasses, joineries, electric fittings, wiring, conduits etc of drops, splashes and living premises clean and tidy upto entire satisfaction of Engineer-in-Charge,
Taking down eaves gutter and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe as directed complete all as specified.
S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified.
S&F in repairs 100mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or in trenches complete all as specified.
S&F 75mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe as directed complete all as specified.
S&F in repairs 75mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified.
S&F in repairs 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified.
S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal, oval access doors, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed by Engineer-in-Charge.
Demolition of lime concrete/ lean concrete/ brick bats from sunken portion exc. 15 cm thickness (above ground level), including removal of rubbish outside MoD land, complete all as specified.
Water proofing treatment to sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approved in Technical Instruction 5/ 2003:- (a) 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 3 % by weight of cement on floor and wall, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Supply only water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.488 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sq.m. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
M&L for PCC (1:2:4), type B-1, using 20 mm graded mechanically crushed stone aggregates, using integral water proofing compound @ 3% by weight of cement, as in padding concrete to sunken floor, covering to junction of floor and vertical walls including chamfering on edges, complete all as specified and directed by Engineer - in -Charge. Note: Supply only water proofing compound shall be measured and paid separately
Supply only integral water proofing compound, complete all as specified.
S&F Steel water tubes, 40 mm bore, medium grade, galvanized, as in spout for sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed by Engineer - in -Charge.
M&L lean concrete (1:5:10), type E-2, using 40 mm brick coarse aggregate, as in sunken portion, complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.
Material and labour, PCC (1:2:4), 40mm thick, type B-1 using 20mm graded mechanically crushed stone aggregates, as in flooring, finished even & smooth using extra cement @1.2Kg/Sqm, laid in panels, complete all as specified and directed. Note: Glass dividing strips shall be measured and paid separately for paneling.
Supply and fix in position, Glass dividing strips, 3 mm thick and 38mm wide, as in floors, complete all as specified and directed.
M& L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge.
Refixing of Shutters after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description n.exc 1 sq. m each in same opening complete all as specified and directed.
Refixing of Shutters after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description exc 1 sq. m and n exc 2 sq. m each in same opening, complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified
Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed portion in CM 1:4 & finished with similar specification as exists, complete all as specified
Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed portion in cement mortar 1:4 & finished with similar specification as exists, complete all as specified
Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate etc, including cement concrete 1:2:4 with 12.50 mm graded aggregate in backfilling of chowkhat etc complete all as specified and directed.
Supply and fix, factory made pressed steel frames for doors with two rebates, of size 125mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate etc, including cement concrete 1:2:4 with 12.50 mm graded aggregate in backfilling of chowkhat etc complete all as specified and directed.
Supply and fix, flush shutters 35mm thick,solid core construction with particle board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood lipping on edges alround, fitted to chowkats, complete all as specified & directed.
S&F factory made panel shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I) and as specified in SSR Part-I section 8 clause 8.24(a), kiln seasoned and chemically pressure treated, complete all as specified.
M&L for 30 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified.
S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified. (Make : M/S Rajshri/Sintex or Equivalent)
S & F factory made moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm prelam PVC sheet on back face, complete all as per manufacturer instructions complete all as specified.(Make : M/S Rajshri/Sintex or Equivalent)
S&F Butt hinges, aluminium alloy with galvanised mild steel hinge pin, anodized and fixed, type B-21, 100 mm, ISI marked, complete all as specified.
S&F 100 mm, ISI marked, butt hinges, heavy duty, medium weight, mild steel cold rolled anodised and fixed in repair complete all as specified.
Supply and fixing 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.
Supply and fix 150mm size aluminum handle, 'D' type, anodized, ISI marked, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete.
S&F spring for doors 300 mm mild steel ordinary rat tail rod pattern spring including roller & roller plate, complete all as specified.
S&F for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 & 3/3.
S&F for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.
S&F for factory made box type steel ventilator fixed type, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.
S&F for factory made box type steel ventilator with glazed shutter or gauzed shutter with glazing bars or flat iron 12 x 3mm dovetailed or welded for fixing wire mesh/glass and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.
M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.
M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified
Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed by Engineer-in-charge.
S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New wooden required for glazing glass in wooden window will be paid for separately.
S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.
Supply and fixing in repairs, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with PVC finals/finnels, connected accessaries, rubber packing, required screws and PVC rawl plugs as required complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
M&L for taking down and refixing the same position to existing rolling shutters by repair/replacement of roller springs, locking device,laths etc if required as per site including necessary cleaning, welding, oiling greasing complete all as specified and as directed by Engineer-in-Charge.
S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified.
Dismantling boarding any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.
Dismantling of framed work i.e fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section.complete all as specified and directed.
S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.
S&F for 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed by Engineer-in-Charge.
S&F for block board 18mm / 19mm thick, grade 2 quality, interior grade, commercial type, decorative both side with teak finished fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed.
S&F Continuous (piano) hinges, stainless steel, bright finish or electro galvanised, 30 mm wide flap (when open), complete all as specified.
S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.
S&F 100mm size aluminum handle, 'D' type anodized complete all as specified and as directed.
S&F for 40mm dia, cupboard knobs fixed with nut, washers / screws etc., of brass polished, bright finished, complete all as specified and directed.
S&F magnet catcher suitable for kitchen cabinet/cupboard with steel plate and stainless steel as required complete all as specified and as directed.
S&F in repair telescopic channel (Heavy Duty) 45mm width and 1.5mm thickness suitable for kitchen cupboard complete all as specified and directed by Engineer-in-Charge.
S&F in repair floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified.
S&F in repair for 40mm dia, cupboard knobs fixed with nut, washers / screws etc., of brass polished, bright finished, complete all as specified and diercted.
S&F in repair magnet catcher suitable for kitchen cabinet/coupboard with steel plate and stainless steel as required complete all as specified and as directed.
S & F in repair mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.
Supply and fix in repair 150mm size Extruded aluminium alloy handle, 'D' type, anodized, ISI marked, complete all as specified and directed.
S&F in repair 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete.
M&L for Cutting opening through brick wall built in cement mortar for window type AC of standard size, forming jambs etc. to opening, making good under cills or over lintels, 2nd class hard wood, plain, fillets, square or rectangular in section, clean swan, sectional area exceeding 13 Sq.cm but not exceeding 25 Sq.cm, including painting & distempering to match existing and removing rubbish out side MoD land, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, complete all as specified and directed by Engineer - in -Charge.
S&F in repairs Vitreous China squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.
S&F in repairs plastic water closet seat white quality pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and directed by Engineer - in -Charge.
S&F in repairs hand shower (Health foucet) cast copper alloy chromium plated with and including 8mm dia 1.00 meter long PVC flexible tube and with hook complete all as specified and directed.
S&F in repairs mild steel chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories, Fixed in repairs, complete all as specified and directed.
S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.
S&F in repairs bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed , complete all as specified.
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.
S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified.
Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.
Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.
Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.
Dismantling PVC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre and stacking for issuing under credit, complete all as specified.
Dismantling water tanks exc 500 but n. exc. 1000 capacity in Ltr and removing from site, complete all as specified and directed.
M&L rotational moulded PVC, double layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified.
M&L rotational moulded PVC, double layered, white colour water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified.
M&L in repairs ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore,complete all as specified.
S&F in repairs PVC lid with clips, screws, locking device complete, suitable for 500 litre capacity PVC water storage tanks, cylindrical closed top, complete all as specified.
S&F in repairs angle stop valve of PTMT, 15 mm bore, any colour high pressure screwed for iron pipe (Minimum weight 90 gms), complete all as specified.
S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms). complete all as specified.
S&F door seal 50mm wide and 1 m in length built in aluminium black plate with nylon brush fixed with screws, complete all as specified.
S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed.
S&F in repair PVC waste pipe flexible for Sink/ WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.
S&F in repair pillar cock long neck, cast copper alloy, chromium plated fancy type , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and fixed, complete all as specified
S & F in 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, fixed in repair complete all as specified and directed.
S & F in 15mm dia Brass CP Sink mixer (wall mounted) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws as fixed in repairs, complete all as specified and directed.
S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed.
S&F soap dish brass, chromium plated fancy type fixed to plugs with chromium plated brass screws.
S & F in repairs CP shower roses with CP Arms 125 mm size, 15mm bore, complete all as specified and directed by Engineer-in-Charge
S & F in repair, Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe upto 0.50 sqm each overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm Complete all as specified and directed by Engineer-in-Charge. (Make: Neelkantha/Jaina/Diamond/Prayag/Nirali)
S & F in repair, Kitchen plate rack made of stainless steel 1 mm thick with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all accessories Complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC cabinet mirror of size 400mmx500mm as approved by Garrison Engineer.
S&F in repairs concealed stop cock regular body with flange, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed for 15mm bore iron pipe or for unions & fixed, complete all as specified.
S&F in repairs towel rail 600 mm long, 20 mm dia, ‘D’ type, brass chromium plated, fixed to walls with screws and plastic cleats, complete all as specified.
S&F in repairs brass chromium plated grating doom 125mm dia with or without hole complete all as specified and directed.
S&F in repairs 15mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Disconnecting existing tanks of capacity exceeding 250ltrs but n. exceeding 500ltrs, draining out of water, setting a side( or lowering if required) for repair/cleaning and removing accumulated sludge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words100mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and as directed by Engineer-in-Charge.
Disconnecting existing tanks of capacity exceeding 500ltrs but n. exceeding 1000ltrs, draining out of water, setting a side( or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words100mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and as directed by Engineer-in-Charge.
M&L for filling of white cement in gaps, joints of tiling,along side wash hand basin,EWC,sink and grating complete all as specified and directed.
S&F in repairs finials/Brackets for curtain rod of any size and shape as required at site complete all as specified and directed.
Welding in repair exc 2.5 cm but n exc 5.00 cm in length thickness of metal to be welded n.exc 6mm, including cleaning, preparing the surfaces and holding the member in true position for maintenance of steel items such as gates, grills, doors window etc. complete all as specified and directed.
Taking down and Refixing of WHB/SINK to existing position including change of rusted bracket/ fastener as required at site, including refixing of existing pillar tap/pvc /waste pipe/grating/bib tap etc and making good with white cement/grey cement to match existing surface complete all as specified and directed.
Fixing only in repairs, pedestal pan and trap, including connection to drain and to flushing pipe, anti syphonage pipe etc., complete all as specified and directed by Engineer-in-Charge.
Taking down old aluminum door and refixing in same opening after reparing to damaged/loosened aluminum rail sections, tightening of scerws,repairing/replacement of locking arrangement, repair/replacement of glass beading,repair/replacement of roller etc making door in serviceable condition complete all as specified and directed.
Harbhajan Singh Sandhu and Sons
MOHAMMAD RASHID
Baba Engineers and Contractors
M/S GOYAL ASSOCIATES
RAJESH KUMAR
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .