Renovation of occupied House Nos. 1180,1203,1203A, 1204, 1206A,2646,2647,2648, 2410, 2656,2137,2644,2644A,2647A, 2660,2922 and vacant House No. 1206,2658A,1181, 2407, 2639 (Type 13) (Old/I(New) (21 Nos. Houses) Sector 20 Chandigarh (IBM Scheme No. W4

Excavating trenches of required width for pipes, cables,etc. including excavation for sockets and dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating deposited layer by remming, watering, etc. and disposal of surplus excavated soil as directed, within a lead of 50 m DSR 2.10

Pipes cables etc. exceeding 80mm dia DSR 2.10.1.1

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia DSR 2.10.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4

Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1

12 mm cement plaster of mix : DSR 13.4

1:4 (1 cement: 4 coarse sand) DSR 13.4.1

Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. Low level white vitreous china flushing cistern & C.P flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever required DSR 17.3

W.C. pan with ISI marked white soild plastic seat and lid cera hirdware DSR 17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillars taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require: DSR 17.7

White vitreous china wash basin size 550 x 400 mm with aa pair of 15 mm C.P. brass pillars tap cera hirdware. DSR 17.7.3

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,cutting and making good the walls wherever required DSR 17.10

Kitchen sink without drain board DSR 17.10.2

610x460mm bowl depth 200 mm DSR 17.10.2.2

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28

32 mm dia DSR 17.28.2.1

40 mm dia DSR 17.28.2.2

Providing and fixing soil, waste and vent pipe DSR 17.35

100 mm dia DSR 17.35.1

Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.1.2

75 mm dia DSR 17.35.2

Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.2.2

Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Including cost of cutting and making good the walls and floors: DSR 17.60

100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS : 3989 DSR 17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work: Exposed on wall DSR 18.10

15 mm dia nominal bore DSR 18.10.1

20 mm dia nominal bore DSR 18.10.2

Providing and fixing of Gun-Metal Peat Valve, ISI Marked complete in all respect DSR 18.17A

size 20mm i/d DSR 18.17.1A

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18

15 mm dia. nominal bore DSR 18.18.1

Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

15 mm nominal bore DSR 18.21.1.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46

15 mm nominal bore DSR 18.46.1

20 mm nominal bore DSR 18.46.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 DSR 18.49

15 mm nominal bore DSR 18.49.1

Providing and fixing C.P. brass long body bib cock of approved DSR 18.51

15 mm nominal bore DSR 18.51.1

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52

15 mm nominal bore. DSR 18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 DSR 18.53

15 mm nominal bore DSR 18.53.1

Providing and fixing of Extension nippple upto 1-1/2" length DSR 18.53A

Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76

With F.P.S. bricks DSR 18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.DSR 18.77

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78

Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. of approved make

Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4" i/d of approved make

Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal

Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make

Providing and fixing of C.P. cup heavy duty of approved make

Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO

Conversion of OWC/Indian W.C to E.WC P/S trap complete including dismentling of Indian/OWC 4" & C.I P trap fixing og 4" C.I bend PVC collar drip seal joint & 4" PVC pipe 1'-6" average length 6kg cm2 pressure repair of dismental floors fixing of surface W.C complete including cost of WC all specials pipe lead hamp yarn cement sand bajri etc

Please Enable Macros to View BoQ information