SPL REPAIR/RE-WIRING OF BLDG NO. P1 and P38 ALONGWITH ITS ANNEXE AT AF STN RAJOKRI UNDER GE (AF) GURGAON

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level. Complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thicknessin floors laid bedded and pointed in any mortor , etc complete all as specified and as directed

Demolition of Brick work built in cement mortar etc complete all as specified and directed by Engineer-In-Charge

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement morter bedding (but not backing ) removing serviceable tiles to store & rubbish off the premises Complete all as specified and as directed

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar. Complete all as specified and as directed

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces, RCC Chajja , Fascia etc and finishing the surfaces even and fair without using extra cement complete all as specified

M&L Rendering 15 mm thick in CM 1:6 on brick work or concrete wall surfaces finished even and smooth (without using extra cement) complete all as spd.

M&L Rendering 10 mm thick in CM 1:3 on ceiling finished even andsmooth (without using extra cement) complete all as spd.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified.

M&L for Preparing newely plastered surface of walls and applying two coats of cement base paint over coat of primer complete all as specified and as directed.

M&L for Preparing newely plastered surface of ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for providing 3mm thick wall care putty on wall before applying Oil bound Distemper and making the surface uniform all as specified and directed by Engr-in-charge.

M&L for 25 mm thick PCC 1 :2 :4 type B-O (Using 12.50mm graded stone aggregate) as in floor complete all as specified & as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L 10 mm thick rendering in CM 1:4 on vertical surfaces for backing of tiles complete all as specifed and directed by Engr-in-charge all as specified.

M&L Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 7mm/450x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed.

M&L for ceramic coloured / non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and directed

M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 Sqm as in floors/Skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and directed

M&L for 18-20 mm thick kota stone (machine cut) slab flooring/skirting laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, to polishing and over complete all as specified and as directed

M&L for Granite (of any type) match the shade of granite stone 18-20mm thick pigment to white cement with admixure of pigment to match the shade of granite stone including grinding complete all as specifed and directed by Engr-in-chargeall as specified.

M/L Providing cement concrete 1:2:4 type B-1 using 20mm graded aggregate) in coping benching,bed plates and the similarincluding,wheathering,slightly rounded or chamferededges andthroatingas directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or any insulations boards/slabs/blankets, any thickness, including cover fillets.

M&L for clip metallic powder coated false ceiling with GI frame work made up of standard Tee, angle or any other section as in grid type ceiling frame work as approved by GE. Ceiling shall be hanged to roof trusses/purlin rafters with the help of GI wire not less than 4mm dia at an interval not exc 1 mtr the size of metallic powder coated ceiling tiles 600mmx600mm x 0.5 mm thick as approved by GE and as directed.

Taking down Chowkhat or frames notexceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames.

Complete all as item No. 26.00 here-in-before but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed

Taking down of shutters of any description exc 1 sq. m but n exc 2.00 sqm each complete all as specified and as directed

S&F 125X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 105X60 mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F2nd class hardwood 35mm thick panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face vineers. Complete all as specified and as directed

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glaed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series (Note : Glass and wiremesh shall be measured and paid separately under respectie items)

S&F galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed

M&L for 4.00 mm thick sheet glass ordinary quality and glazing each pane fixed with including neopune rubber gasket in windows complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed

S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply & Fixing 150 mm Extruded Aluminium alloy handle fabricated type, anodised complete all as specified and directed

Supply & Fixing 125 mm Extruded Aluminium alloy handle fabricated type, anodised complete all as specified and directed

S & F 100 size MS butt hinges medium weght complete all as specified and directed

Providing, cement concrete type C1:3:6 (20 mm graded stone aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed

M&L for 15 mm thick plaster in CM (1:3) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately

Supply only integral water profing compound ISI marked .

S & F in Repair UPVC Pipes (SCH-40) 150 mm

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store.

Complete all as item No. 49.00 here-in-before but 20mm dia .

S&F 3- layer PP-R polypropylene random copolymer )outer dia of pipe 16 mm concealed SDR 7.4 (PW-16)UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random copolymer fittings fixed complete to walls, ceiling or in floor complete all as specified

Complete all as item No. 51.00 here-in-before but 20mm dia.

Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out oftrenches/floors.

Complete all as item No. 53.00 here-in-before but bore of pipe 100mm dia.

M&L for cast iron soil waste and vent pipe sand cast any length with or without ears with cement joints fixed to walls 75mm dia complete all as specified and as directed

Complete all as item No. 55.00 here-in-before but bore of pipe 100 mm dia.

S&F cast iron waste and vent pipe in any length with or without ears with cement joints laid in floors bore of pipe 75mm dia.

Complete all as item No. 57.00 here-in-before but bore of pipe 100mm dia.

S&F in repairs cast iron bends (any radius) larger bore measured bore of pipe in 75mm fixed fitted withoval access doors.

S&F in repairs cast iron bends (any radius) larger bore measured bore of pipe in 100 mm fixed fitted with oval access doors.

M&L in repairs cast iron floor trap including jointing to waste pipe in cement mortar 75mm dia.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.

S & F in repair CI vent cowl 75mm bore

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, including cutting for and pinning in ends of brackets complete all as specified and directed.

S & F in repair 32 mm dia PVC Waste pipe for Wash hand Basin complete all as specified and as directed

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm long fixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed

S&Fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.

S & F in repair Towel ring of PTMT fixed with and incl chromium plated brass screwes and wooden/plastic cleats (miminum wight 90 gms) complete all as specified and as directed

S&F in repair 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and as directed

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed

S&F in repair Aluminium anodised Coat hooks 60cm long between flanges complete all as specified and as directed

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including connection to flushing pipe and outgoing pipes complete all as specified and as directed

Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of weather Coat Exterior Emulsion paint(Camouflage pattern) complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying two coats distemper oil emulsion, white or tinted complete all as specified and as directed

M&L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying two coats of white wash complete all as specified and as directed

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old decorated wood and wood based surfaces of any description not other wise described over 10cm width or girth and varnishing to wood based surfaces ,sizing,filler coat , staining and varnishing of under coat and finishing coat complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for sheet glass 3 mm thick glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and as directed

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking bending for hoping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed by Engr-in -charge.

M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto double story building Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified and directed by Engr-in -charge.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

S&F flameproof Exaust fan with cast aluminium alloy LM6 housing, IS 60079 light gray epoxy powder coated 12 " 240/415 Volt AC, 1440 RPM , 50 Hz complete all as specified and directed by Engr -in - Charge.

supply & fix in 60 watt CMRI certified LED flameproof Bulk head / well glass luminaire , die cast aluminium hosing with heat resistant toughened glass IP 65 protection complet with all accessories prewired and including connecting up with flameproof twin core twisted flexible copper conductor cable of sutable size complete all as specified and directed by Engr -in - Charge Make: Cat Pat No FWL1315-40-CDL/CG or equvilant in Syska / Havells

S&F in flameproof FLP/WP12 Way power Distribution Box with cast aluminium alloy LM6 Housing, IS 60079 light gray epoxy powder coated, with externaly oprated switch, complete all as specified and directed by Engr -in - Charge.

S&F in Switch flame proof rotary type with termination box in aluminium alloy LM6, 16A, 250V, single pole 250V, IS 60079 light gray epoxy powder coated, complete all as specified and directed by Engr -in - Charge.

S&F switch socket & plug combination with plug top 3 pin flame proof rotary type with termination box in aluminium alloy LM6, 16A/20A, 250V, 2P+earth, single pole 250V, IS 60079 light gray epoxy powder coated, complete all as specified and directed by Engr -in - Charge.

M&L for Painting of celing Fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler by taking down then hanging & connecting up including provision of cable from ceiling rose or connector to fan

Flame proof point wiring complete as specified with 1100 volts grade 1.5 Sqmm and using same size earth continuity conductor two single core PVC insulated unsheathed cable (FRLS) 1100 volts grade conforming to IS 694 with stranded copper conductor in and including ERW steel conduit with all accessories required for flame proof wiring such as FLP bends, elbow, unions, plug, junction box, flexible connecting pipe, glands etc concealed type in wall/ceiling/floor/roof etc, sunk pressed steel or cast iron flame proof terminal boxes including 1.5 Sqmm PVC insulated stranded copper conductor earth wire connected to common earth dolly for one light / fan / Exaust fan point controlled by one switch. Note:- All accessories required for point wiring shall be make: Sudhir Switchgear Pvt Ltd./Flexpro/Baliga.

Flame proof point wiring complete as specified with 1100 volts grade 2.5 Sqmm and using same size earth continuity conductor two single core PVC insulated unsheathed cable (FRLS) 1100 volts grade conforming to IS 694 with stranded copper conductor in and including ERW steel conduit with all accessories required for flame proof wiring such as FLP bends, elbow, unions, plug, junction box, flexible connecting pipe, glands etc concealed type in wall/ceiling/floor/roof etc, sunk pressed steel or cast iron flame proof terminal boxes including 2.5 Sqmm PVC insulated stranded copper conductor earth wire connected to common earth dolly for:-

Flame proof Submain wiring complete as specified with 1100 volts grade 4 Sqmm and using same size earth continuity conductor two single core PVC insulated unsheathed cable (FRLS) 1100 volts grade conforming to IS 694 with stranded copper conductor in and including ERW steel conduit with all accessories required for flame proof wiring such as FLP bends, elbow, unions, plug, junction box, flexible connecting pipe, glands etc concealed type in wall/ceiling/floor/roof etc, sunk pressed steel or cast iron flame proof terminal boxes including 4.0 Sqmm PVC insulated stranded copper conductor earth wire connected to common earth dolly for:-

Flame proof submain wiring complete as specified with 1100 volts grade 6 Sqmm and using same size earth continuity conductor two single core PVC insulated unsheathed cable (FRLS) 1100 volts grade conforming to IS 694 with stranded copper conductor in and including ERW steel conduit with all accessories required for flame proof wiring such as FLP bends, elbow, unions, plug, junction box, flexible connecting pipe, glands etc concealed type in wall/ceiling/floor/roof etc, sunk pressed steel or cast iron flame proof terminal boxes including 6.0 Sqmm PVC insulated stranded copper conductor earth wire connected to common earth dolly for:-

S&F in repair MCB, single pole & neutral, 240 Volts 32 Amps,10Ka complete all as specified and directed .

S&F in repair MCB, single pole, 240 Volts (05 to 30) Amps,10Ka complete all as specified and directed

S&F in repair MCCB63 Amp,4 pole, 415 V ,16kA all as specified and dirceted . Make:- L&T/Schneider/Legrand/Hager

M&L in for point wiring complete with stranded copper conductor 1.5 Sq. mm size (Nominal area) PVC insulated unsheathed cable 1100 volts grade conforming to IS drawn in and including medium duty concealed in PVC conduit conforming to IS and ISI marked not less than 19 mm dia with concealed box with cover plate and frame including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for :-

One light point , fan point controlled by one,one way switch.

All as per item No 104.00 above but 3 Pin 5 Amp Socket on the same board, complete all as specified.

All as per item No 104.00 above but 3 Pin 5 Amp Socket on independent board , complete all as specified and directed.

All as per item No 104.00 above but 3 Pin 15 Amp Socket on independent board with 2.5 sqmm PVC insulated unsheathed cable , complete all as specified and directed.

All as per item No 104.00 above but for 2 pin metal sheet enclosure 20 Amp Socket on independent board with 4 sqmm PVC insulated unsheathed cable , complete all as specified and directed.

S&F in repair double door VTPN 8 way suitable for 4 pole MCCB as incoming & sp /TP MCB as outgoing 200 Amp rated busbar , inter connection link , Cable ties, earth bar etc. complete all as specified& directed by Engr-in-Charge Note (MCCB, MCB to be measured and paid separetly ) Make L&T , Schneider / Legrand / Hanger.

M&L for socket 5 amp 5 pin flush type 240 Volts with polycarbonate body

M&L for socket out let , 6 pin 5 and 15 amp multi purpose 2in1 flush type 230 Volts with polycarbonate body

M&L for switch piano, flush butten single pole one way 5 amps, 240 volt with polycarbonate body complete all as specified and directed by Engr-in-Charge

supply & fix in repair switch piano type one way 15 amp ISI marked complete all as specified and directed by Engr-in-Charge

S&F in replacement of MCB DB sheet enclosure single pole and neutral 240 V with 200 Amp suitable size plate and comman neutral link all enclosed in standerd steel sheet flush mounting type Double door factory fabricated complete confirming to IP 42/43 without MCB and without enclosure blank plates for unused way suitable for 8 way complete all as specified and directed

S&F energy saving decorated box type betten light fitting surface mounted complete with high efficiency PMMA deffuser soft glaire free light LED lamp 1 x 18 watt 4 ft sutable for 120 volts to 270 volts of system efficiency not less than 90 lumen /watt with all accessories, pre wired, including lamp and provididng flexible copper wire , twin core cable complete all as speciafied and directed as Engr-in-Charge. Make : Phoilips /CG/Syska/ Havells.

S&F energy saving decorated box type betten light fitting surface mounted complete with high efficiency PMMA deffuser soft glaire free light LED lamp 2 x 18 watt 4 ft sutable for 120 volts to 270 volts of system efficiency not less than 90 lumen /watt with all accessories, pre wired, including lamp and provididng flexible copper wire , twin core cable complete all as speciafied and directed as Engr-in-Charge. Make : Cat pat No - LCTLRN-40-CDL )1x4)of CG and equvilant in /Syska/ Havells.

S&F inreplacement of sheet matel enclosure with socket plug top and MCB single pole and Neutral with two pin and plug with one SP MCB 20 amp 240 Volt for AC complete all as directed

Net Contract Sum will be after deducting Sch of Credit of Rs 57,405.00

Shiv Shakti Builders

JAIPAL AND BROTHERS

H.B. Traders

PARKASH ENTERPRISES

Commercial Traders