Sukhanwala

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 80 km 0 km to 80 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 260 km 0 km to 260 km

5.2 + 4.1 A/Earth,Surkhi, Sand, Earth, Fly Ash, Bajri with Stone (building or pitching) Sand, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Lead upto 0.5 km to 1.00 km

8.5 (b)/Dismantling brick work tile masonary or tile lining.

14.6/Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.

15.6 - 15.3/Extra for additional 4mm thick cement plaster in 1:5 on LPDE film on side slope and bed.

15.66/Cement pointing 1:2 flush on brick on edge flooring.

16.07/Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

16.13/Finishing walls with cement based water soluble paint such as Snowcem, Rubiacem etc. on new work two or more coats to give an evevn shade

17.10 (xvii)/Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) (ii)/35 mm thick

19.2/Dressing side slopes and preparation of sub grade for lining.

19.15/Extra allowence for scaffolding in till brick and concrete lining for side slops only.

24.5 Compaction :--(b) (i)/Extra for laying earth/fly ash as per specifications in 20 cm layers and dressing but excluding cost of rolling.

(b) (ii)/Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

(b) (iii)/Extra for rolling to specifications.

28.13/Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by mannual means and refilling in origional condition. PVC 10kg/Cm2 (less than 3 mtr street width). (iv)/110mm o/d pipe of 10 Kgf. / sqcm (Scour Pipe)

28.2 + 28.13 + 28.18/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2 (xii)/63mm o/d pipe of 6 Kgf. / sqcm

28.27 A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a)/80mm i/d Sluice Valves flanged

(d)/200mm i/d Sluice Valves flanged

28.31/Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. A/Class PN-1.0 as per ISI with rubber Flap (a)/100mm i/d Non-return valve

28.36/Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. A/20 mm I/d

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a)/Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.66/Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a)/Size 0.60 m. x 0.60 m.

(b)/Size 0.90 m. x 0.90 m.

29.27/First class brick on edge paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

29.34 A/Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). (a) (ii)/560mm i/d RCC man hole cover with frame as per ISI

34.14/COPPER EARTHING (Upto 8 metre in Length): Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length) (a)/Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)

NS/Silt Clearance from Collecting Sump

NS/Providing and fixing Angel Iron Pickets of size 40mm x 40mm x 6mm complete in all respect.

NS/Providing & streching Barbed wire 3 ply including cost of binding wire and aluminum painting complete in all respects.

NS/Providing and placing LDPE Film 250 micron on side slope and in bed including overlapping over 25mm thick mud plaster.

NS/Supplying and fixing 200 mm i/d 3.53 mtr. long Galvanized Iron Sheet Floating Arm including Sluice Valve complete in all respect.

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)/Top Layer

(b)/2nd to Bottom Layer

NS/Repair of Fall Slabs of Filter Beds

NS/Repair of Inside Ladder

NS/Providing and fixing MS Ledder of required length and design

NS/Repair of Plinth Protection for OHSR

NS/Provision for Repair of railling

NS/Providing and fixing Ceiling Fan

NS/Providing and fixing Led (20W)

NS/Providing and fixing Head Light including labour etc. (outside of Pump Chamber)

NS/Providing & streching Barbed wire including cost of binding wire and aluminum painting complete in all respects.

NS/Painting on Main Gate Pillers, Corner Pillers, Main Gate, Angle Iron Pickets etc.

NS/Repair of Corner Pillar

NS/Providing and fixing Angle iron Pickets of required size and length to strenthening barbed wire.

NS/Repair of Pump of Raw Water Motor 5 BHP for Raw Water collecting sump & Head works

N/SRepair of Clear Water Motor and Pump 12.50 BHP

NS/Providing and fixing Panel Board with fitting complete in all respect.

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)

NS/Provision for Painting on Sign Board

NS/Credit of Old Sluice Valves in Filter Beds.

NS/Credit of Old Sluice Valves in OHSR