GE/C-42/2024-25 WELCOME MAINT AND MISC B/R AND E/M WORKS AT PRATAP CHOWK, TAURAS ENCLAVE AND OTHER ADJOINING AREA UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt size exc 1 sqm but n exc 2 Sqm etc complete all as specified.

Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white lime wash on walls surfaces all as specified and directed.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth using paint brush by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint brush all as specified and directed.

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by using sand paper etc.for proper preparation and applying one coat of synthetic enamel paint all as specified and directed.

M&L removing existing old treatment from walls using mechanical grinder complete all as specified and directed.

M& L for prepration of old surface and applying a uniform thickness (average 2-3mm thickness) of cement based wall care putty of approved to the entire surface of walls surfaces finished even and smooth complete all as specified and directed.

M& L for applying two coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed.

M& L for applying one coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in double storey building etc incl taking down incl two coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:6 finished even and smoothe surface without using extra cement on wall in double storey building etc incl taking down and apply two coats of OBD complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces of walls and applying one coat of cement based paint all as specified.

S&F in replacement drappery curtain rods stainless steel 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod complete all as required and directed.

Cleaning and removing all scales and dirt etc. of the tank by scrapping with hard plastic/nylon wire brush and washing it with bleaching powder solution and thereafter washing the same with clean water from service water tank and mouth of circulating pipe of capacity of tank upto 1000 litre complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm long aluminum alloy anodised sliding door boll with hasp staple balt-type and fixing clips of sheet case or extruded sections and fixing bolls and sliding bolls extruded sections or case aluminum alloy complete all as specified and directed.

S&F in repair 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complete all as specified and directed.

S&F in repair 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete complete all as specified and directed.

S&F in repair to cupboard (Kitchen) area n exc 1 Sqm incl easing of cupboard shutters tightening of piano hinges fixing of handle/knob, hasp and staple etc (one unit self comprise of one CB irrespective of Nos of shutters).complete all as specified and directed

S&F in repair floor door stopper (150mm) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor in repair ,all as specified and directed by the Engineer in charge.

S&F in repairs continous piano hinges, mild steel bright finish or electro galvanized width of flap 30mm when open fixed with steel screws complete all as specified.

S&F in repairs 40 mm dia cup board knob fixed with nut screw and washer of mild steel bright finish.complete all as specified and directed.

S&F in repair MS 300mm size, door spring ordinary rat tail rod pattern springs (ISI marked) including roller and roller plate complete.all as specified and directed.

S&F in repair 100mm long aluminium anodized hasp and staple fixed with mild screws to shutters complete all as specified.

M & L for 600x600x08 to 09mm thick coloured vitrified tiles(joint less) (make of tiles as approved by GE)as in floor over and including 15mm thick screed bed in CM 1:6, including pointing in coloured cement to match the shade of tiles including hacking out the existing floor surface,cleaning with water and applying cement slurry @ 3 kg/sqm on prepared surface of floor and including cutting/adjusting of existing door shutter at required height after taking down and refixing complete all as specified directed.

All as per item No 23 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting/dado with screed/plaster on walls complete all as specified directed by Engr-in-Charge, and approved by GE all as directed.

S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top ) composite type or lid should be thread type) hoisted and fixed in position with flot valve and tank connection nipple including dismantling of pvc tank complete all as specified.

S&F Rotational moulded polythylene 500 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top) hoisted and fixed in position with float valve, tank connection nipple including of dismantling pvc water tank complete all as specified.

S&F in repair Prelaminated particle board 18/19 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing continuous Piano hinges, bright finish stainless steel, width of flaps when open 30mm with suitable size steel screws complete all as specified and directed .

Taking down chowkhats or frames n exc exc 1.5 Sqm (without taking off shutters from the frame).

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm(without taking off shutters from the frame).

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each, complete all as specified.

M&L for second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and two nos 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed by Engr-in-charge.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and two nos 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed by Engr-in-Charge.

S& F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats (incl two nos 100 mm long extruded aluminium tower bolts, two nos 75mm long medium weight MS butt hinges, 01 nos 125 mm long extruded aluminium handles and two coats synthetic enamel paint along with one coat of pink primer) all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

S&F Powder aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.

S&F 4.00 mm thick plain glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified.

M& L for non skid coloured rectified ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed for laying floor in CM 1:6 including dismantling the existing tiles with screed and removal of debries out of MOD Land complete all as specified and directed by Engineer in Charge, approved by GE.

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting /dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,including dismantling the existing tiles with screed and removal of debries out of MOD Land complete all as specified and directed by Engr-in-Charge, approved by GE.

M & L for 15mm bore GI tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc incl, cutting chases in wall where ever required and then making good including dismantling of old GI tubing complete all as specified and directed.

M & L for 20mm bore GI tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc incl, cutting chases in wall where ever required and then making good including dismantling of old GI tubing complete all as specified and directed.

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.

S&F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to rain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete complete all as specified .

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 580mm x 450mm complete including , CP Waste couppling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified.

S&F in repairs chromium plated toilet paper holder, complete all as specified.

S&F in repairs chromium plated soap dish, complete all as specified.

S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing Complete including fixing of granite slab with and including providing suitable size groove for adjusting top level ,moulding of slab each side and polished all as specified.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as spd.

S & F in repairs 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified .

S & F PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.

S&F in repairs angle valve 15mm dia fancy type chromium plated all as specified and directed by the Engr-n-charge .

S&F in repair 15mm dia CP bib tap fancy type chromium plated .

S&F in repairs PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips complete all as specified.

S&F in repairs fancy type PVC fibre body toilet cabinet size 600x450x6mm fixed with brass screw and cup and washer complete all as specified.

S&F in repairs aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S & F in repair brass chromium plated towel ring including a pair of CP brass bracket coplete all as specified and directed.

S & F in repair Glass Corner Shelf 10mm thick including CP railing radius 300mm radius complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe 15 mm bore of pipe screwed for iron pipe fancy pipe all as specified and as directed.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed.

S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Demolition of cement Concrete pavings exc 15 cm thickness (below or above ground level) for EWC & IWC removing out cinder/ concrete from sunken portion and and (a) M & L for sunken portion filled with Cinder or 40mm graded brick bats over finished with 50mm thick PCC 1:2:4 type B1 with water proofing compound including applying 2 layer of 85/25 Bitumen @ 1.20 Kg/Sqm each coat all as specified and directed (b) M & L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete Plus as specified .(c) M & L for providing 50 mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(d)Filling of sunken with brick bats as per requitrement.(e) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.all as specified and directed. Note : IWC/EWC Shall be measured and paid under relevant items seperately

Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through Existing non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings.

One light/fan point controlled by one way switch

One bell / buzzer point controlled by one bell push

One light point controlled by two Nos two way switches

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board

All as per item No 67 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through including non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings.

One light/Exh fan point controlled by one way switch

One bell / buzzer point controlled by one bell push

One light point controlled by two Nos two way switches

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board

All as per item No 69 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete.

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 1 module / 2 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 3 module / 4 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 6 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc. including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately

Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 8 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately

Supply only replacement white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 3/4 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 6 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 8 module complete all as specified and directed by Engineer in charge.

M&L switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified.

M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified.

M&L switch modular type 6 amp SP two way, 1 module complete all as specified.

M&L Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete.

M&L switch Modular type 16 Amps 1Way, 1 module with modular plat, 230V AC complete.

M&L Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete.

M&L modular stepped type electronic fan regulator 120W, 2 module complete .

M&L Switch piano flush button type single pole one way 6 Amps complete all as specified.

M&L switch piano flush button type single pole 16 Amps complete all as specified.

M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified.

M&L socket outlet 6 Amp flush button type complete all as specified.

M&L regulator electronic switch/socket type 5 steps suitable for 1200/1400 mm sweep 230 volts.

M&L bell electric (dingdong) 230 volt, SP all complete all as specified and directed .

M/L insulated body, angle holder (metal ring) with back plate complete.

S&F ceiling rose surface PVC type with three terminals complete all as specified and directed .

M&L Modular sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 10Amps complete with one single pole MCB 'C' series 10/20 A capacity complete all as specified.

Taking out existing and repair /replacement of Modular MCB upto 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S & F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S & F LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

S & F LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge .

S & F surface ceiling mounted, LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S & F 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 25 mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified.

S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified.

S&F Sub main wiring with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 4 sqmm cable shall be measured as one RM.

S & F Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed. Note: Three runs of 4 sqmm cable shall be measured as one RM.

S&F Sub main wiring with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 6 sqmm cable shall be measured as one RM.

S&F Sub main wiring with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface/ concealed in walls complete all as specified and directed. Note: Three runs of 10 sqmm cable shall be measured as one RM.

S & F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

S&F MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

S&F MCB DB SPN 02 way, single door 240 V AC 50Hz , with 10 Amps MCB SPN as incomer / out going complete.

S &F MCB DP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S & F MCB DP 40 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S & F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S & F and Replacement of Ventilating Fan upto 250 mm sweep, not less than 1200 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

S&F and replacement of wall mounted fan 400 mm sweep, aerodynamic designed, air delivery ≥ 70 CMM, thermal over load protected motor, 3 blade white colour, 230 volts, 50 Hz, 1420 RPM with 90 degree oscillation and having speed & oscillation control by two pull cords system complete all as specified .

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge.

S&F SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete.

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed.

supply only hole fastner madeup of MS 6" long with complete nut bolt all as specified.

Schedule of Credit

M/s S.G. BUILDERS (BID ID -3100143)

V M CONSTRUCTION (BID ID -3106093)

M/S Parmod Johar (BID ID -3109094)

M/s M M BAHL (BID ID -3108316)

POONAM ENTERPRISES (BID ID -3107244)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3120927)