REPLACEMENT OF FAN RODS WITH ANIT-SUICIDE RODS AND CERTAIN MINOR / REVENUE WORKS AT AF STN BIHTA

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl. all quions, arches, pillars etc, complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (Old size bricks) straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (Old Size bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15 cm thickness (below or above ground level), complete all as specified and directed. Note:- All demolished items/ debris to be removed out side of MoD land.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. Note:- All demolished items/ debris to be removed out side of MoD land.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in floor/sub floor etc, complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor, complete all as specified and directed.

M&L RCC (Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) for beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces, complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with complete all as specified and directed.

All as per item No. 12 above but 5 mm dia & over upto & incl 10 mm dia in stirrups, complete all as specified and directed.

M&L for Rendering 10 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound, complete all as specified and directed. (WPC measured and paid separately)

Supply only ISI marked integral water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint over a coat of primer, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying 2 mm thick wall care putty in layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying 2 mm thick wall care putty in layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old painted surfaces of walls, chajjas, columns, beams etc. and finishing with two coats of acrylic smooth exterior paint (100 % acrylic) applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer (acrylic base) applied @ 2.20 kg/ 10 sqm in camouflage pattern by using different tints of irregular shape in any type of building/structure including RCC over head tank of any height, complete all as specified and as directed.

M&L Glazed ceramic premium quality designer coloured tiles in vertical surface such as skirting/dados etc. size 300X600 mm, 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with tiles including 15 mm thick cement plaster in 1:4 CM on brick or concrete surfaces complete all as specified and directed. Note:- Shade, colour and design shall be approved by GE.

M&L Non - skid premium quality Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm screed bed in Cement mortar 1:6 complete all as specified and directed. Note:- Shade, colour and design shall be approved by GE.

S&F Coloured Vitrified (dark shade) tiles 8-9 mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S&F Coloured Vitrified (dark shade) tiles 8-9 mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 sqm in walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl. 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations, complete all as specified and directed.

S&F in repair rimless single piece WC with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set of size 380x670x765 mm, complete all as specified and directed. Make:- Jaquar, Model No FSS-WHT-29853500UFSM or equivalent in Kohler/Roca

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device also making good to floor, complete all as specified and directed.

S&F in repair Wash hand basin (Counter top) of size 545x 450x180 mm complete all as specified and directed. Make:- Jaquar, Model No FSS WHT 29601 and equivalent range in Kohler/Roca as approved by GE.

S&F in repair vitreous china urinal of size 355 x 340 x 535 mm complete all as specified and directed. Make:- Jaquar, Model No - URS-WHT-13261H and equivalent range in Kohler/Roca as approved by GE.

S&F decorated type Bottle Trap chromium plated of size 3.20x25x19 cm complete all as specified and directed. Make:- Jaquar, Model No ALD-769L250x190 and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type bib cock chromium plated half turn with wall flange complete all as specified and directed. Make:- Jaquar, Model No FLR-5047N and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type pillar cock chromium plated half turn with wall flange complete all as specified and directed. Make:- Jaquar, Model No FLR-5011N and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type brass cromium plated Single lever Basin mixer without popup waste with 450 mm long braided hoses and fittings complete all as specified and directed. Make:- Jaquar, Model No KUP-35011 BPM and equivalent range in Kohler/Roca as approved by GE.

S&F in repair corner glass shelf decorated type of size 450x125 mm with toughened glass with brass bracket guard and railing complete all as specified and directed. Model No:- MARVEL011 and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type looking mirror 4 sqft round mirror 6 mm thick of make modiguard complete all as specified and directed. Model No:- MODOGUARD6MM and equivalent range in Kohler/Marc as approved by GE. Note:- Design and pattern shall be approved by GE.

S&F in repair decorated type looking mirror of area exceeding 1.5 sqm but not exc. 3 sqm, 6 mm thick of make modiguard complete all as specified and directed. Note:- Design and pattern shall be approved by GE.

S&F in repair decorated type towel ring square shape with round flange complete all as specified and directed. Make:- Jaquar, Model No- ACN-1121N and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type angular stop cock with wall flange complete all as specified and directed. Make:- Jaquar, Model No- FLR-5053N and equivalent range in Kohler/Roca as approved by GE.

S&F in repair towel rack 600 mm long with lower hanger complete all as specified and directed. Make:- Jaquar Model No- AQN 7781A and equivalent range in Kohler/Roca as approved by GE.

S&F in repair decorated type health faucet with 8 mm dia and 1.2 mtr long flexible tube and wall hook complete all as specified and directed. Make:- Model No- ALD-573 and equivalent range in Kohler/Roca as per approved by GE.

S&F decorated type soap dish holder complete all as specifiedand directed. Make:- Jaquar, Model No- AKP-35731 and equivalent range in Kohler/Roca as per approved by GE.

S&F decorated type toilet roll holder with stainless steel flap complete all as specified and directed. Make:- Jaquar, Model No- AKP-35753PS and equivalent range in Kohler/Roca as per approved by GE.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

Dismantling of existing cast iron soil vent pipe of 100 mm internal dia fixed to wall or laid in trenches and taking out from trenches and removal incl. all fittings and accessories, complete all as specified and directed.

Dismantling of existing cast iron soil vent pipe of 75 mm internal dia fixed to wall or laid in trenches and taking out from trenches and removal incl. all fittings and accessories, complete all as specified and directed.

S&F 100 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears fixed to wall with cement joints, complete all as specified and directed.

S&F 100 mm dia bore cast iron bends of any radius diminishing pieces or tappers (larger bore measured), complete all as specified and directed.

S&F 75 mm dia bore cast iron bends of any radius diminishing pieces or tappers (larger bore measured), complete all as specified and directed.

S&F cast iron cowls of 100 mm bore pipe, complete all as specified and directed.

S&F in repairs of 75 mm Cast iron floor trap, with chromium plated grating of 75mm size including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M&L for PVC (SWR) pipe including all fittings such as bend, tee etc. of 40 mm bore single socketed in any length with adhesive joint fixed to wall with suitable clamps of adequate numbers etc. complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth in Brick walls complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

Dismamtling water storage tanks and removing to store (capacity exc. 500 & n.exc 1000 ltrs) complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & fixing in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixing in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and directed.

M&L for powder coated of any colour anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for powder coated of any colour anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L anodised aluminium window and ventilator shutters, any type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F of door closer aluminium (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 0.61 to 0.81 Kg and fixed complete all as specified and directed.

S&F mortice lock of brass, 4 levers, vertical type, size 75 mm complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Sqm tube & fixed in position as per manufacturer's instruction complete all as specified and directed.

S&F solid PVC Moulded Door shutter 28 to 30 mm thick stiles with partical board core with 2,4,6, raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face complete all as specified and directed.

S&F for 100 mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodised handles, cast type complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F figured glass, pin head type in square exc. 0.50 Sqm each pane, 6 mm thick fixed to aluminium section complete all as specified and directed.

S&F figured glass, pin head type in square not exc. 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete all as specified and directed.

S&F Sheet glass, ordinary quality in square not exc. 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs of harrison rail mild steel chromium plated of 25 mm dia decorative type curtain rod fixed with two Nos. of brackets for each rod complete all as specified and as directed.

S&F 3 to 4 mm thick, wall panelling of PVC foam profile 100 to 200 mm wide with tongue and groove joints and ribs pattern of depth 10 to 12 mm incl. PVC beading at corner, bottom and at end of panelling, complete all as specified and directed. Framing shall be done from solid PVC foam batten / Metal section as per manufacturer's instructions. Note:- Design and pattern as approved by GE (Make : Accucel and equivalent).

M&L for brick work with old size fly ash brick class designation 75 (Kgf/cm2) straight or curved on plan exc. 6.0 mean radius built in CM 1:6, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc. complete all as specified and directed.

M&L rendering 15mm thick on fair faces of bricks cement concrete surface CM 1:4 finish fair & rough without using extra cement, complete all as specified and directed.

M&L for preparing new surfaces of steel of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for complete removing of existing treatment of wall surfaces and applying two coats of cement base paint, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.

S&F Framed work ( Fe 410-W, Gde E-250 Quality A) with modern pattern / Ornamental pattern ( Square hollow / rectangular hollow box pattern ) as in doors or gates with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. (Note:- Design of gate will be as per users requirement).

Taking down Fan, sealing cable end, dismantling blades, removing fan electrical connections complete all as specified and directed.

Hanging only ceiling fan, 230 V, 1200/1400 mm sweep any size/capacity including clamps, hooks, holdfasts and connected accessories (all new) etc. new smart fan rod/anti suicidal fan rod making electrical connections, testing and commissioning for smooth operation with connecting accessories including three core 1 sqmm of copper conductor cable from ceiling rose to fan connection with color coding, complete all as specified and directed. Note: New smart fan rod/anti suicidal fan rod shall be measured and paid separately.

S&F Smart rod/Anti suicide fan rod "Gold Life" and load on fan 22 kgs, then smart rod / pipe opens from its centre and spring in the pipe expands. Rod was tested at Govt of Inida MSME labs size of fan rod 10'' white/brown complete accesories 230 V, 1200/1400 mm sweep, function fans, nut bolts cutting of pipe including three nos. 1.5 sqmm of wires from ceiling rose to fan connection with color coding complete all as specified and directed.

S&F Smart rod/Anti suicide fan rod "Gold Life" and load on fan 22 kgs, then smart rod / pipe opens from its centre and spring in the pipe expands.Rod was tested at Govt of Inida MSME labs size of fan rod 18'' white/brown complete accesories 230 V, 1200/1400 mm sweep, function fans, nut bolts cutting of pipe including three nos. 1.5 sqmm of wires from ceiling rose to fan connection with color coding complete all as specified and directed.

Material and labour for concealed point wring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLSH PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 1 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLSH PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed for the following: -

One light/fan/exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

One 3 pin/5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

One 3 pin/5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on independent board.

S&F switch piano flush button single pole one way 5/6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and directed.

S&F for socket outlet, 5 Pin, 5/6 Amp flush type conforming to IS 1293 ISI marked complete all as specified and directed.

S&F ceiling rose, surface Bakelite, isolated body three terminals including taking down old one complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220 V, 4 ft, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED flood light 70 watt, 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including all fixing arrangements on mettalic sheets complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver with minimum 100 Lm/W, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED downlighter square shape PDC aluminium housing with 100 Lm/W efficacy with ordering code Crompton CDR2051257SLNWH or equivalent in Surya/Syska/Bajaj, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volts with 100 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, complete all as specified and directed.

S&F MCB’s single pole, 10 KA, 6 Amp to 32 Amp 240 Volts, and of ''C'' series with required wiring connections and lugs etc. and erecting in provided enclousre/distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, complete all as specified and directed.

S&F MCB’s DP, 10 KA, 32 Amp to 40 Amp, 240 Volts, and of ''C'' series with required wiring connections and lugs etc. and erecting in provided enclousre/distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996 complete all as specified and directed.

Material and Labour for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 sqmm single core 1100 volts grade FRLSH PVC insulated, unsheathed multistranded copper conductor with and including PVC concealed conduit pipe 20 mm medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white plate with frame of required module at site, fixed with chromium plated screws and washers for switches and sockets, on walls, surface on roofs and beam etc. including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including cutting chases in walls / floors for concealed conduit for one light, fan, bell point controlled by one switch and making good disturbed surface area by cement mortor (1:3) and to match with the existing surface / colour by using existing oil bound distemper / white wash complete all as specified and directed for the following :- Note:- Cutting chase to wall wherever required shall be included in the rate quoted for poing wiring.

One light point or one fan point controlled by one switch with cable 1.5 sq mm.

One 2pin/3pin switch socket outlet 5 amps on independent board with cable 1.5 sq mm.

One 5 Amps socket point on same board with other switches.

All as per item No.110 above but wiring complete with cable of 2.5 Sqmm for 3 pin 15/16 Amps socket outlet on independent board complete all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as directed by Engr-in-Charge.

M&L for Modular socket outlet 2 in 1, 5 pin, 6A, flush type white finish complete all as directed by Engr-in-Charge.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as directed by Engr-in-Charge.

M&L for Modular socket outlet 2 in 1, 6 pins, 6A and 16 A, combined 2 module white finish complete all as directed by Engr-in-Charge.

Material and Labour for ceiling rose surface bakelite 65x50 mm 3 terminals complete all as specified and directed by Engr-in-Charge..

Material and Labour for modular fan step regulator, 120W- 2 module complete all as spedified and directed.

M&L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100 Volts grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc. with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M&L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100 Volts grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc. with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

Supply and fixing post top lantern/gate light LED type 20 watt 230 Volts AC outdoor type conical aesthetic powder coated pipe mounting on 40/50 mm THD <10% and 90 Lm/w with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp with cutting chasing on pillar/road/PCC/Bituminous road for conduiting/pipe work and fixing of conduit 20 mm ISI mark and suitable size connecting wire upto switch/MCB and making good disturbed surface complete all as specified and directed.

S&F MCB’s DP, 10 KA, 6 Amp to 10 Amp 240 Volts, and of ''B'' series with required wiring connections and lugs etc. and erecting in provided enclosure/distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one complete all as specifie and directed.

S&F sheet metal enclosure 2 way single door IP-43 with complete including one single pole & neutral MCB 6A ,10 KA "C" series flush into walls and making good disturbed surfaces, complete all as specified and directed.

Supplying and Fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections 4 sqmm multi stranded, complete all as specified and directed.

M&L for GI tubing medium grade 15 mm dia with all fittings, fixed on walls/poles, complete all as specified and directed.

M&L for GI tubing medium grade 40 mm fixing in upright position on existing entrance gate pillar/embedded in PCC for fixing of gate light, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, using 20mm graded aggregate mechanically crushed stone including road/PCC cutting of street/road/path complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for under ground cable / erection of poles, stays etc, complete all as specified and as directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing of excavated material (soil) not exc 50 mtr away and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supplying and laying old size sub class 'B' burnt clay bricks, laid flat perpendicular to the cable adjoining each other as in protection to UG cables, complete all as specified and directed.

M&L for fine sand free from sharp material as in filling in trenches for cable protection incl necessary punning and consolidation as reqd, complete all as specified and directed. (Note: Depth of sand shall be measured after punning).

Supply, fixing & jointing galvanised iron water tubes 'light grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to poles/walls or laid under roads/ drain/ nallah/ floor etc including flat iron clamps, nuts, bolts and washers etc complete all as specified and directed for the following dia of tubing: - (a) 50 mm bore

(b) 80 mm bore

Supply, Laying, connecting and testing XLPE insulated, screened, PVC bedded galvanised steel strips or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 Volts grade, laid in trenches, ducts, encased in GI pipe, fixed to pole/wall, laid under road, path, drains, culverts, fixed bare, complete all as specified and directed for the following size of cables: - (excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately) of following sizes :- (a) Cross sectional area 10 Sqmm 4 core

(b) Cross sectional area 16 Sqmm 4 core

Material & Labour for fixing street light bracket made out of GI pipe light grade 40mm bore approx length not less than 120cm bent to shape without wielding including new clamps made out of MS flat of size 30x5mm thick including cutting, welding, drilling holes, nut bolts, washer, etc including two coats, aluminium paint over one coat of red oxide primer on MS work including taking down old UNSV one, complete all as specified and directed.

S&F PVC insulated and PVC sheathed 2.5 sqmm twin core round FR copper conductor industrial cable, 1100 Volt grade conforming to IS 694 and making necessary connections from Junction box to street light by using suitable size of aluminium thimbles/terminal etc and testing incl taking down old unsv cable of any size, complete all as specified and as directed.

S & F in replacement street light fitting 45 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiares, heat resistant toughened glass with frame, better optics for uniform distribution with high power LED as Light source including taking out old unserviceable street light fitting of any type/wattage, complete all as specified and as directed.

S&F astronomical time switch with minimum switching time of 1 minute weekly programmable including making necessary electrical connections, time setting and testing etc including taking out the old unsv one, complete all as specified and directed.

Supply and fixing LED Highway light, 200 Watt, 230 V AC, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with hanging in hanger of height upto 15 mtr, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED flood light energy saving & environmental friendly long life versatile pressure die-cast aluminum, IP66 flood light of 150 Watt 240 Volts single phase incl taking down old unsv flood light of any wattage complete with all necessary connection as required and complete all as specified and directed by Engineer-in-Charge.

S & F LED Decorative post top Gate Light for 360 degree indirect light with IP 65 protection incl taking down old unsv light fitting, complete all as specified and directed.

S&F LED Bollard light made up of extruded aluminium with PC diffuser with fitting on GI pipe, 10/12 watt with ordering code SLE BL 12W BLK800 OR equivalent as approved, complete all as specified and directed by Engr-in-charge.

Supply and fixing MCB SP rating 240V, 10KA 'C' curve, of capacity 5 to 32 amps, complete with connection complete all as specified and directed.

Supply and fixing MCB DP rating 240V, 10KA 'C' curve, of capacity 32 -63 amps, complete with connection, complete all as specified and directed.

M&L Point wiring using approved colour coding as per IS, with FRLSH smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for four light points controlled by one Switch, including FRLSH insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad for the followings:- (a) One light/fan point controlled by one switch

M&L Point wiring for socket point using approved colour coding as per IS, with FRLSH smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 2.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked, TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for four light points controlled by one Switch, including FRLSH insulated unsheathed unitary construction copper conductor 2.5 Sqmm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad .

M&L for flame proof switch-socket & plug combined point controlled by single pole one way 16 Amp ON-OFF rotary switch. Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth, complete all as specified and directed.

S&F in repair flame proof weather rotary switch with cable terminal box in cat aluminum alloy (LM-6) construction, epoxy powder coated, single pole 16 Amp ON/OFF type, 230 V AC, certified by CMRS for Group IIA & IIB complete including compression glands, complete all as specified and directed.

Supplying, laying connecting & testing PVC insulated sheathed, aluminium solid conductor cable of size 4 Sqmm twin core flat or circular, 1100 volts grade service connection from pole light to box with 15 mm flexible pipe connection on poles whereever reuired at site, complete all as specified and directed.

Supplying, laying connecting & testing PVC insulated sheathed, aluminium solid conductor cable of size 10 Sqmm twin core flat or circular, 1100 volts grade, complete all as specified and directed.

Supply and fixing LED light fitting 1x20/1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. complete with all accessories, prewired and including connecting up with three core flexible copper conductor cable, complete all as specified and directed.

M& L for fixing cable junction box LT 3 phase type having IP 66/69 weather proof for outdoor installation made of plastic material of size 350X250X138 mm with opaque cover, conical cable gland aluminium lugs, Protection Class IP 65, 04 Nos aluminium bus bar of size 25x4 mm for three phase and neutral including 01 no MCB SP 6 Amps for controlling street light and 2 Nos MS clamp of size 30x5 mm complete with nut, bolt and washers for mounting the junction box on street light pole complete incl taking down old one and all as specified and directed by Engineer-in-Charge. Make-Sintex Product Code-GSMB 3425 and Equivalent make and model.

Supply and fixing LED tube lights fitting 1x 18W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED tube lights fitting 1x 10W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaires (>120 Lumen/watt) 600 mm x 600 mm, 34/36 watt suitable for 230 volts, 50 HZ AC supply recessed type with high efficiency PMMA diffuser soft glair free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose incl taking down old one, complete all as specified and directed by Engr-in-charge.

SANJAY CONSTRUCTION COMPANY (BID ID -3139953)

RADHESHYAM PASWAN (BID ID -3127236)