PROVN OF EMERGENCY FIRE EXIT AT ADELPHI CSD HO UNDER GE (WEST) COLABA, MUMBAI

Amount

Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work at any position/height all as specified and directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like stair case including caps, bases, splices built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates all as specified and directed.

S&F Mild steel bolts (dia of neck exc 20 mm but not exc 25 mm) purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long all as specified and directed.

S&F rolled mild steel in stairs (Fe 410-w Gde E 250) quality A (framed) including stringers, treads, landings, balusters, hand rails etc, with cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts) fitting of angle cleats, fish plates, gusset plates all as specified and directed.

S&F chequered plates (Fe 410-w Gde E 250) quality A mild steel plate as in staircase landing and tread including necessary welding all as specified and directed.

S&F 2 mm thick mild steel preforted sheet as in staircase risers including necessary welding and necessary required fitting for fixing all as specified and directed.

S&F stainless steel (Grade 304) railing, newal post, ends, caps and balustars made of hollow tubes, channels, plates including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including tanking down existing fittings all as specified and directed.

M&L for applying two coats of anti rust PU enamel paint over a coat of red oxide on steel surfaces including preparation of new or previously untreated surfaces of any description and at any position all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding and removing rubbish all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft loose/hard dense soil all as specified and directed.

Excavation over areas, n exc 3.00 m deep and getting out in soft loose/hard dense soil all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors all as specified and directed.

M&L RCC M-30 Design Mix in foundations, including rafts, footings, foundation beams, bases for column, slab, under reamed pile and mass concrete (reinforcement to be measured separately) all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips all as specified and directed.

All as per item No 14 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders/tempreture bar including other works all as specified and directed.

Removal of excavated material exc 1.50 km & n.exc 5 km distance and depositing where directed all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers nexc 25 cm in soil all as specified and directed.

S&F 8 to10 mm thick rubber matting sheet fixed with adhesive as per manufactures instruction to mild steel work all as specified and directed.

S&F 10 to 12 mm thick toughned glass as in door shutters, plateform. partition including necessary cutting to shape, drilling holes as required, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, stainless steel snap beading & screws all as specified and directed.

S&F Solar control film or frosted film or sun film or logo 25 micron reflective type sticked to glass panes as per instructions of manufacturers in any type or design and size all as specified and directed.

M&L for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm x 8 to 9 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L coloured Vitrified tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L 40 mm thick PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in levlling course all as specifie and directed.

M&L 75mm thick PCC 1:3:6 type C 2 (using 40mm graded crushed stone aggregate) as in plinth protection all as specifie and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching/coping and sub base set in CM 1:6 all as specifie and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed.

M&L 15-25 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed.

M&L 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall ( internal surface ) and finished surfaces even and smooth without using extra cement all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specifie and directed.

M&L for Brick work with fly ash bricks old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two or more coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, or equivalent over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specifie and directed.

M&L for preparation of newly plastered surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each (without taking off shutters from the frame) all as specified by engr in charge

Taking down chowkhats or frames with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) all as specified & directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specifie and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

M&L Granite (of any type and size) 18 to 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over 10mm thick rendering in CM 1:4 on kitchen platform, Cill of Window/Ventilator/ flooring/border including rubbing, grinding and polishing and also in vertical support all as specified and directed.

M&L 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square area exc 0.5 sqm in each pane all as specified & directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Use & waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick Horizontal or sloping all as specified and directed.

Use & waste form work to sides of concrete foundation footing, bases of columns, rafters etc rough finished surfaces of concrete flat edges of footings all as specified and directed.

All as per above Item No 39 but to sides and soffits of floor and roof beams and lintels all as specified and directed.

Use & waste form work to sides of columns square/ trangular, or rectangular in section rough finished surfaces of concrete flat all as specified and directed.

S&F Fire safety Sign board glow in dark / Auto-luminescent (photoluminescent signs that use phosphorescent materials to absorb light and then emit it slowly over time) made of 3 mm thick hard board/acrylic sheet in various sizes, wall/ ceiling mounted with clear and legible lettering and necessary signs/arrow/drg, water resistance and fire / heat resistance fixed with necessary stainless steel screw, bolts as per manufacturer insturctions all as specified and directed.

Cutting holes in brick walls exc one brick but not exc two bricks built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exceeding half brick but not exc one brick all as specified & directed.

sri construction (BID ID -3104625)

HINDUSTAN BUILDERS (BID ID -3101224)

GANGAJAL (BID ID -3099803)

Bidder Name

HINDUSTAN BUILDERS

Nilesh Construction

GANGAJAL

sri construction