Lake front development at Puzhal

Amount

Cutting and clearing heavy jungle including removal of stumps roots and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

Cutting and clearing light jungle including removal of stumps roots and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

Cutting and Clearing scrub jungle including removal of stumps roots and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

Cutting and clearing jule flora jungle with uprooting and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

Cutting and clearing jule flora jungle without uprooting and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling GRAVEL in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:3:6 (One Cement, three crushed stone sand and six hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Boring, Providing and installing bored cast -in-situ reinforced cement concrete pile of 450 mm dia and length top of pile cap in cement concrete M-30 grade using 20 mm size excluding the costs of steel reinforcement and the cost of boring with casing and /or benotonite solution and the length of the pile to be embeded in the pile cap etc. All completed. (length of pile for payment shall be measured top up shoe to the Top of pile cap).

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three crushed stone Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid Footing Centering

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid - Centering (Except Footing Centering)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

supplying and fixing of Hollow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of bottom thehold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.

Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick and 1 mm thick laminate on both faces including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300x12mm aluminium tower bolt 2nos. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (i) Manually Operated (up to 8 sqm. Area)

Supply, Fabrication and erection of Structural steel works including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" Super Structure including curing, etc., complete complying with standard specifiction.

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi-chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on wor.

Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing 50 mm GI pipe handrails for handicapped persons using 50mm dia GI pipe double handrail at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre as shown in CA Job No. 9123 / 1 including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Painting new wood/metal work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing and fixing 75mm thick Birla Aerocon Drywall Panel Partition, comprising of 1.0mm thick GI Floor track of size 76mm, having unequal flanges of 25mm and 14mm and fixed with nylon sleeves self expansion fasteners to the floor and 1.0mm thick Ceiling track of size 76mm, having two equal flanges of size 35mm and fixed to RCC soffit in plumb to each other with nylon sleeves and self expansion fasteners. Birla Aerocon Panel (Non-Asbestos) of width 600mm, height 2400mm/2700mm/3000mm as suitable which are made of two Fibre Reinforced Cement facing boards on either sides of a lightweight concrete core. These boards shall be of thickness of upto 4.5 to 5mm and shall conforms to IS 14862:2000 (Type A, Also recommended for Exposed weather condition). These panels shall have fire rating of 2 Hrs. or more, Thermal conductivity of 0.17 W/m.k , sound insulation of 40 db. and can able to take Axial load of 90 KN/m or more (tested as per ASTM E 72) and 75mm thickness will be inserted into floor and ceiling track in vertical position. Jointing of these Prefabricated fibre reinforced sandwich panels shall be done with a Birla Aerocon Smartbond Panel jointing compound in tongue & grove with a thin slurry of Water and Birla Smartbond Jointing compound in the ratio of 0.6:1 and surface joint shall be treated also with Birla smartbond jointing compound with a Thick paste of Water and Birla smartbond Jointing compound in the ratio of 0.35:1 and fibre tape. Finally 2-3mm wall putty will be applied at all surface of the panels to maintain the level. The paint as per choice with necessary surface preparation will be applied on the surface. (Further for detailing please follow the Birla Aerocon Panel Installation PSOP).

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Neat cement punning. 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Providing and fixing UniStone Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shade and thickness. Border Thickness: 40-50mm Inner Member: 25-30mm OR Overall 35mm thick seamless module pattern Note: GRC Screens will have 50% void and 50% solid area

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Moorum Pathway Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.

Brick on edge flooring Providing and laying Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)

Wash Grit flooring Providing and laying Washed stone grit floooring over a layer of 100 mm thick P.C.C., in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge. (100 mm thick P.C.C. shall be paid seperately)

Rubble stone flooring Providing and laying Rubble stone flooring 10 cm thick with cement mortar of 1:4 in between voids and a layer of 12 mm mortar bed below stones, including supply of stones, all complete to the satisfaction of engineer-in-charge.

75 mm thick Round Pebble stone flooring Providing and laying 75 MM THICK ROUND PEBBLES stone flooring with cement mortar of 1:4 in between voids and a layer of 12 mm mortar bed below stones, including supply of stones, all complete to the satisfaction of engineer-in-charge.

40 mm thick Round Pebble stone flooring Providing and laying 40 MM THICK ROUND PEBBLES stone flooring with cement mortar of 1:4 in between voids and a layer of 12 mm mortar bed below stones, including supply of stones, all complete to the satisfaction of engineer-in-charge.

Stamping on Concrete Applying stamping finish to the top surface of freshly laid plain/reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in-Charge. The process shall include the following:- • The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. • After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface. • The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.)

Cobble stone flooring Providing and laying 100x100x100mm thick minimum granite cobble stone pavers of steel grey colour or as specified , laid in the pattern as shown in the drawing laid on 75mm (average) thick base of cement 1:3:6 (1 cement : 3 coarse sand : 6 graded aggregate) of approved design/ shape including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with admixture of pigment to match the shade of stone. (Cost of 1:3:6 cement concrete shall be paid extra).

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in charge).

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Supply and fixing of Big Size Stone (Rocks) to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and fixing of Pre Cast Concrete Slab to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

External flooring for Elevated Pathway deck Flooring, With Aluminum Frame Work All Completet item be done in order as directed and specified by the Engineer-in-Charge :

Providing & fixing Pergola at Entry with Support of 150 mm x 100 mm 6 mm M.S. Hollow square section with horizontal support of indian teak wood section size of 50 mm x 100 mm & painted with oil paint as per design. Complete as per instruction of engineer-in-incharge.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. 50mm (+38mm) thick PUF roof panel

Supplying and fixing Polycarbonate roofing with 6mm thick sheets of approved colour of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed.

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/ shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately

Supply and fixing of Kingspan KingZip “SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-construction shall comprise of: (1) First Layer (Top layer) – Kingspan KingZip Aluminium 65/400 profile sheeting manufactured from aluminium self-supported standing seam roof system from aluminium alloy AA 3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with PVDF2 finish (standard colours ) on the exposed surface. The profiled roof panel should have 3 Nos of Mini ribs for extra strength Accessories, Fasteners. The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2.The roof panels shall follow the building profile . Halters to be fixed to the purlins with SS 304 screws All installation is to be carried out by approved trained roofing installer. The roofing system provider shall be certified with a British Board of Agreement and should have Factory Mutual (FM-4471) & UL Certification (UL-90), Thomas Bell Wright Certification and should have at least 2 roll formers not less than four years old in India. All installation is to be carried out by approved and trained roofing installer. (2) Second layer: Insulation – Layer of Rockwool insulation of 50mm thickness each minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20 degrees Celsius when tested to ASTM C518. (3) Third layer: Single layer of aluminium foil of minimum thickness 0.2 mm. (4) Fourth Layer - Aluminium Halters of suitable height with thermal barrier pads to be fixed to the sub purlins with SS 304 screws only 5) Fifth Layer: Welded Wire Mesh – GI welded Wire mesh of size 75x 75mm of dia 1.6mm

Aluminium Flashing 0.9mm thick: Flashings manufactured from aluminium alloy AA 3004(AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9 mm and Fluorocarbon PVDF finish on the exposed surface. The material shall be same colour& material as of roofing sheet. Girth – 400mm to 560mm Roofing Aluminium Sheet (Exhibition Centre)

Stylam or Fresca or Century Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door size width) made up of thermosetting resign treated high pressure ,self supporting decorative compact laminates with permanently incorporate anti-bacterial agents during manufacturing . Compact board should be resistance to water immersion through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification, Certification under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN:438-6. Pilaster to be supported with Stainless Steel (grade316) adjustable foot and intermediate panels will attached to the wall with the help of approved Stainless Steel (Grade 304) channels and all required hardware, made up of stainless steel (Grade 304)as per manufacturer’s specification and instruction of Engineer-in-charge like Door knob, gravity hinges,Thumb turn locksets with occupancy indicators ,coat hooks with door stoper , U channel, top rail with corner connector, adjustable foot/pedestal( all Stainless Steel Grade 316),Rubber noice deafening tape, screw & wall plugs. The top fitting should Stainless Steel metal top rail(as per manufacturer specification with Grade 304) which will directly get fixed with pilaster ,Stainless Steel 304 grade bend (connected with top rail ) will be use in corner of cubical in absence of brick wall, Stainless Steel (Grade 304)Tabular Connector wall fixing is used only on the wall which will hold the top rail. All screw will of 304 grade in SS with stain finish. Pilaster shoud be raised from the the floor with a clearance height upto 150 mm with the help of adjustable leg.Finish and colour of Toilet cubical should be approved under guidance of engineer-in-charge.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. INVERSION MACHINE (RE-016-GYM, of Arihant or equivalent) of size 1.78 x 1.05 x 1.72 m, Max user weight 120 Kg., with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. CROSS COUNTRY SKIER (RE-017-GYM, of Arihant or equivalent) of size 1.3 x 0.55 x 1.81 m, Max user weight 120 Kg., with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. ROLLER DRUM (RE-018-GYM, of Arihant or equivalent) of size 1.5 x 1.3 x 1.1 m, Max user weight 110 Kg., with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. ELLIPTICAL CROSS TRAINER (RE-019-GYM, of Arihant or equivalent) of size 1.3 x 0.5 x 1.82 m, Max user weight 110 Kg., with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. AIR WALKER (RE-20-GYM, of Arihant or equivalent) of size 1.3 x 0.5 x 1.55 m, Max user weight 110 Kg., with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor type Gym Equipment i.e. 4 SEATER SQUARE SPIRAL SEE SAW (RE-01-SS, of Arihant or equivalent) of ACTUAL EQUIPMENT SIZE: 7 X 7 X 3 FT. MINIMUM RECOMMENDED AREA: 10 X 10 X 5 FT, with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, Delivery, Installation and Commissioning of Outdoor kid's play Equipment i.e. 2 SEATER SWING RUBBER BELT (RE-02-SW, of Arihant or equivalent) of ACTUAL EQUIPMENT SIZE: 10 X 5 X 10 FT. MINIMUM RECOMMENDED AREA: 12 X 8 X 12 FT, with heavy duty bearings of reputed make and press fitted for smooth rotation, and not requiring re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. Including suitable foundation with its excavation, RCC, base plates bolts, anchors etc. duly protected from corrosion by suitable means. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Supply, delivery and Installation of Multiplay Station of (HM-09-MP, ofArihant / Equivalents make) ACTUAL EQUIPMENT SIZE: 42 X 22 X 16 FT. MINIMUM RECOMMENDED AREA: 50 X 28 X 20 FT. CHILDREN CAPACITY: 40 CHILDREN, including transportation, installation, commission, Loading and Unloading etc.including civil work. for complete finished item of the work. 1) Pipes: Material Specification: The Spiral Slide is made up of Fiber Reinforced Plastic (FRP) in 3 parts with holding having shell thickness of 3 to 4mm. The trader sand risers of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. 2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top.

Providing and fixing Outdoor grade Bench of Powder coated aluminium frame of Size - L 5' with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness, all complete as per views and to the satisfaction of engineer-in-charge. [P.C.C. shall be paid extra ]

Providing and fixing Bench of Composite base with SS frame and Acacia hardwood of Size -10’-0” x 6’-6” x ht 18” with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness, all complete as per views and to the satisfaction of engineer-in-charge. [P.C.C. shall be paid extra ]

BUILT SIT-OUTS - Construction of built sit-outs (1800mm x 600 mm, 450mm high) complete in all aspects with P.C.C. sub-base and brick masonry outer walls finished in wood finish material with suitable foundation, all complete as per views and to the satisfaction of engineer-in-charge.

SOLAR TREE FOR BUILT SIT-OUTS - Providing and fixing of Solar Tree, suitable for parks and recreational areas with aesthetic appeal, making it an ideal choice for parks. The solar tree shall be as per Architectural intent of the Architect and as finalised by client with canopy coverage of 4 m dia and height of 3.5 m. The Solar tree shall comprise of :- Efficient Solar Panels: featuring high-efficiency solar panels strategically positioned to capture maximum sunlight throughout the day, ensuring optimal energy generation. Modular Design: With a modular design, offering flexibility in installation and scalability, allowing for easy expansion as energy needs grow. Smart Tracking System: Equipped with an intelligent tracking system, the Solar Tree should be able to automatically adjust the orientation of solar panels to track the sun's movement, maximizing energy output. Storage Capacity: Integrated energy storage capability ensuring continuous power supply, even during periods of low sunlight or at night, offering reliable energy independence. The frame work of the tree should be able to sustain the wind-load and have a coating of suible marine paint to resist corrosive environment. Suitable foundation with capability to sustain the windspeed of the area. [P.C.C. shall be paid extra ]

Providing and fixing Outdoor grade Bench of Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness, all complete as per views and directions of Engineer-in-charge. [P.C.C. shall be paid extra ]

Providing and fixing Outdoor grade Single Person 48''Wide Polyester rope hammock. Made out of 100% UV Resistant Polyester rope 7mm thick, tightly twisted and high glossy finished hardwood spreader bars. Hammock to be highly comfortable and offer relaxation and comfort at the highest level. The hammock shall accomodates 1 adult comfortably. The polyester rope to be UV resistant and more durable than cotton. The hammock shall withstand a total weight capacity of not less than 250 lbs and to be mounted on a hammock stand of Suitable material and strength including complete set of hanging hardware to mount hammocks anywhere, with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness,all complete as per views and directions of Engineer-in-charge. [P.C.C. shall be paid extra ]

Providing and fixing Outdoor grade Bench with backrest, of Length 12 foot and width 2.5 foot, giving appearence of stone coping and comprising of Outdoor grade composite base hardwood slat Powder coated SS 304 handles with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness,all complete as per views and directions of Engineer-in-charge. [P.C.C. shall be paid extra ]

Providing and fixing Outdoor grade Landscape element of PU painted MS Pillar of height 12 foot and canopy dia of 10 foot dia with laser cut pattern with suitable foundation and capable of sustaining wind load, all complete as per views and directions of Engineer-in-charge.

Providing and fixing Outdoor grade Bench with backrest, with PU painted MS base with hardwood slat, Length - 8 foot with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness, all complete as per views and directions of Engineer-in-charge.

Providing and fixing Outdoor grade Metal trellis - Simple structure over bench with FRP planter on sides to train creepers and Cast Iron Bench, Length - 8 foot with suitable foundation bed of 1:3:6 P.C.C. bed of 125 mm thickness, all complete as per views and directions of Engineer-in-charge. [P.C.C. shall be paid extra ]

Providing and fixing Outdoor stainless steel dustbin made out of SS 202 grade materials, capacity of each bin 60+60 ltrs. sheet thickness 0.8 mm and pipe dia 38.0 mm, all complete as per views and directions of Engineer-in-charge.

Double Pole Information SignageProviding and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed to with 50 mm depth aluminiumframe for media signage mounting , with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Single Pole Directional and Information Signages Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed to with 50 mm depth aluminiumframe for media signage mounting , with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Single Pole Information Signages Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed to with 50 mm depth aluminiumframe for media signage mounting , with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Single Pole Directional Signages Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed to with 50 mm depth aluminiumframe for media signage mounting , with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Supply & Installation of a internal Wall/door mounted Department name Sign . The Sign is made up of printed Vinyl sheet over a backing of 3 mm thk ACP of size 118 x 426 mm will be installed with necessary screws on the wall/door, all complete to the satisfaction of Engineer-in-charge.

Supply Installation testing and Commissioning of Illuminated 3D Letter Signages to be installed with necessary screws/ fixing arrangement on the Ground/roof etc, all complete to the satisfaction of Engineer-in-charge. 450 mm high

Supply Installation testing and Commissioning of Illuminated 3D Letter Signages to be installed with necessary screws/ fixing arrangement on the Ground/roof etc, all complete to the satisfaction of Engineer-in-charge. 900 mm high

Supply & Installation of CNC LASER cut WPC signage in requisite design, to be installed with necessary screws/ fixing arrangement on the wall, all complete to the satisfaction of Engineer-in-charge.

Supply, installation, testing & commissioning of Pipe (HDPE) pipes PE 100 conforming to IS 4984-1995 6kg/cm2 complete hydraulic testing after laying the pipes including all fittings, tee, elbow, bends, clamps, flanges, saddles & required accessories to complete the work in all respect as per direction of PMC (underground piping). Make -Supreme pipes/Jain Pipes/ Oriplast Pipe HDPE PIPE 90mm

Supply, installation, testing & commissioning of Pipe (HDPE) pipes PE 100 conforming to IS 4984-1995 6kg/cm2 complete hydraulic testing after laying the pipes including all fittings, tee, elbow, bends, clamps, flanges, saddles & required accessories to complete the work in all respect as per direction of PMC (underground piping). Make -Supreme pipes/Jain Pipes/ Oriplast Pipe HDPE PIPE 65mm

Supply, installation, testing & commissioning of Pipe (HDPE) pipes PE 100 conforming to IS 4984-1995 6kg/cm2 complete hydraulic testing after laying the pipes including all fittings, tee, elbow, bends, clamps, flanges, saddles & required accessories to complete the work in all respect as per direction of PMC (underground piping). Make -Supreme pipes/Jain Pipes/ Oriplast Pipe HDPE PIPE 50mm

Supply, installation, testing & commissioning of Pipe (HDPE) pipes PE 100 conforming to IS 4984-1995 6kg/cm2 complete hydraulic testing after laying the pipes including all fittings, tee, elbow, bends, clamps, flanges, saddles & required accessories to complete the work in all respect as per direction of PMC (underground piping). Make -Supreme pipes/Jain Pipes/ Oriplast Pipe HDPE PIPE 40mm

Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level

Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level - 100 mm dia nominal bore Irrigation Line from Lake Pump

Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level - 80 mm dia nominal bore

Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level - 65 mm dia nominal bore

Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level - 25 mm dia nominal bore

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. - Gate Valve 25mm

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. - Wheel Valve 25mm

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT - Gun Metal Gate Valve-100mm Dia

Supply, Installation, Testing and Commissioning of Centrifugal Pump set (mono block). The capacity of each pump, Total Head-15.00m, Discharge-20 m3/hr with 3-phase 50 Hz, with electrical control panel suitable for the pump set including construction of concrete foundation, suction and delivery piping arrangements, fixing of required sizes and nos. of C.I. valves (pressure rating PN-1.0) like Sluice valves (rising spindle), Butterfly valves, NR valves with strainer etc. all complete as per the technical specification & direction of EIC

Providing all materials, labour and T&P required for construction of brick masonary valve chamber of following minimum size having strength 75 Kg/cm² and RCC M-20 confirming to IS-456/2000 and IS-3370 at all locations & heights using Fly ash bricks and for RCC using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, the minimum thickness of RCC base slab, all side walls and roof slab shall be not less than 200mm, 150mm and 125mm respectively, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed. PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing and fixing pre-cast factory made RCC man hole cover with frame of clear opening of 600mmx600mm and providing and fixing of Polypropylene Steel Reinforced Man Hole stps of approved quality and size in two parallel lines of 300mm spacing in vertical walls with center to center 375mm(staggered).Painting the chamber with 2 (two) or more coats of approved water proofing cement paint over a coat of cement wash. Printing and writing the wall sign board of approved size and specification including cost of all materials, labour, T&P, royalties, all taxes and hire & running charges of machineries with POL etc. all complete as per specification & direction of EIC.

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. External Work For 25 mm dia Pipe

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. External Work For 32 mm dia Pipe

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. External Work For 50 mm dia Pipe

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. External Work For 100 mm dia Pipe

Charges for cutting of pipes, cost of G.I specials. External Work. 25 mm nominal dia Pipes

Charges for cutting of pipes, cost of G.I specials. External Work. 32 mm dia Domestic Pipe

Charges for threading of pipes, cost of G.I specials. External Work. 25 mm dia Domestic Pipe

Charges for threading of pipes, cost of G.I specials. External Work. 32 mm dia Domestic Pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. . 25 mm nominal dia Gate Valve

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 32 mm nominal dia Gate Valve

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. . 25 mm nominal dia Wheel Valve

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 32 mm nominal dia Wheel Valve

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal.15 mm nominal dia pipes

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal..20 mm nominal dia pipes

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal . 25 mm nominal dia pipes

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Elbow - 15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Elbow - 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Elbow - 25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Elbow - 32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Tee - 15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Tee - 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Tee - 25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer Tee - 32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer -15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer - 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer- 25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Reducer -32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - End Cap - 15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - End Cap - 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - End Cap -25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - End Cap - 32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Tee- 15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Tee- 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Tee- 25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - Tee- 32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - BEND- 15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - BEND- 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - BEND- 25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - BEND- 32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - ELBOW -15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - ELBOW - 20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - ELBOW -25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - ELBOW -32 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - COUPLER -15 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - COUPLER -20 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - COUPLER -25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Internal Work - COUPLER -32 mm Dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. - 110 mm Dia Pipes

Supplying and fixing in position best quality PVC soil / waste pipes and Fitting of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level - 50 mm diameter

Supplying and fixing in position best quality PVC soil / waste pipes and Fitting of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level- 63 mm diameter

Supplying and fixing in position best quality PVC soil / waste pipes and Fitting of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level- 110 mm diameter

Supplying and fixing in position best quality PVC soil / waste pipes and Fitting of various dia having 10 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level 40mm diameter metre

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) Floor Trap (110X75)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) W.C. pan with ISI marked white solid plastic seat and lid

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

THIN RIM TABLE TOP BASIN SIZE: 420X420X150 MM SHAPE TOP BASIN

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore angle valve

HAND SHOWER (HEALTH FAUCET) (ABS BODY) WITH 8MM DIA, 1.0 METER LONG SPIROCHROME FLEX TUBE & WALL HOOK Health faucet/S.S Jet

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). Without Pedestal

Supply installation, testing & commissioning of TWIN ROOT AIR BLOWER including compressors, Pipes etc, all complete assembly, with mechanical seal arrangement, fixed on a base plate. All complete to the satisfaction of engineer-in-charge. Capacity : 20 meter cube per hour Type : Twin Lobe Moc : CI Make : AEW/ GWT/ AKASH

Supply, Installation, testing & commissioning of 3-phase, 50Hz Submersible pump set of required head & discharge including HDPE delivery pipes of 10 Kgf/cm2 of material grade P.E.-80, fixing of suitable size of G.M. NR valve (ISI mark) with required fittings & connect to existing pipe, laying of approved size of three core flat cable with Bore bunched copper conductor insulated sheathed with PVC for Submersible Motor with voltage grade up to 1100 Volt confirming to IS-694/1990 of required length, control panel & required accessories suitable for 200x150mm size Production Well. etc. all complete as per specification & direction of EIC. Capacity : 20 Meter Cube Head : 6 Rated Speed (RPM) : 2900 Pipe Size (mm) : 50 mm Moc : CI Make : Kirloskar / CRI

Supply installation, testing & commissioning of AGITATOR for mixing of coagulant in coagulation tank including motors strirrer shaft, blades all complete with frame and fixing arrangement, fixed on a base plate including bolts, nuts, washer. All complete to the satisfaction of engineer-in-charge. Power Rating : 1 Hp Shaft Length

HYPO DOSING SYSTEM Supply installation & commissioning of hypo Dosing Pumps for raw water Tank Quantity- 2.0 Nos (1w+1s) Capacity of Dosing Pumps- 0-20 LPH Types of Pumps – Electronic Metering Type MOC of Pumps- PP Pressure- 3.5 -4.0 Kg/cm2 Make of Dosing Pumps- E-Dose/Positive/Eq. Quantity of Dosing Tank- 1.0 Nos. Capacity of Dosing Tank -200 Liter MOC of Dosing Tank- HDPE Make of Dosing Tank- Sheetal/Jindal/Supreme/Eq

PIPING AND VALVES Providing all Piping and Valves (as described below) of required sizes and numbers with all accessories, fittings. supports, clamps, rubber gasket, nuts, bolts, washer's, flanges, NRV's, flow control valves, strainers at suction of clear water pumps for making the system complete in all respects. All Piping - As Mentioned Specifically a. WTP plant piping – MS B-Class Make - Jindal Hissar/Eqv Butterfly Valves: Zoloto/Kartar/Eqv. NRV-Zoloto/Kartar/Eqv. - Disc type, Single flap, MOC-C.I

BOTTLE TRAP (WITH INTERNAL PARTITION) 32MM SIZE WITH 250MM & 190MM LONG WALL CONNECTION PIPES & WALL FLANGE

ANGULAR STOP COCK WITH WALL FLANGE

THIN RIM TABLE TOP BASIN SIZE: 420X420X150 MM SHAPE-SQUARE

GRAB BAR VERTICAL SWING

GRAB BAR 692MM LONG, WHITE

THIN RIM TABLE TOP BASIN SIZE: 420X420X150 MM SHAPE

SINGLE LEVER BASIN MIXER WITHOUT POPUP WASTE WITH 450MM LONG BRAIDED HOSES

HAND SHOWER (HEALTH FAUCET) (ABS BODY) WITH 8MM DIA, 1.0 METER LONG SPIROCHROME FLEX TUBE & WALL HOOK

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. Gun Metal Valve

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. eXTERNAL phe Valve Chamber (300x300x500)

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. eXTERNAL Valve Chamber (600x600x750)

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. Internal Valve Chamber (600x600x750)

Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately). NP2 class 150mm Dia Sewer Line

Supplying and fixing in position 150mm dia stoneware tee of approved best quality and provding leak proof joints with cement, spun yarn, etc., including dismantling the brick work and re-doing the dismantled portion to the original condition, etc., complete complying with standard specifications (The stoneware tee shall be got approved by the Executive Engineer before use on work) NP2 class 150mm Dia Sewer Line

Constructing masonry Chamber 60x60 inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 13 Manhole

Supply, Installation, Testing & Commissioning MSEP Pre-Fabricated Packaged STP – 5 KLD Plant with Electrical and Mechanical Equipment of MS Thickness-3 MM with EPOXY PAINT Bar Screen ,Sludge Transfer Pump , Air Blower ,MBBR Media & Diffusers Clarifier Media Dosing Pump , Filter Feed Pump Multigrade Sand Filter FRP Activated Carbon Filter, FRP Filter, Feed Tank HDPE, Electrical Control Panel , Electrical Cables & Conduit Flexible, STP- Pipes & Valves etc.materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. STP -5 KLD Plant

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 50 litres

Planting of Korean grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Shade grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Maintenance of lawns: Lawn mowing with electric motor / portable cutter machine and edging & weeding of the lawns (once in 15 days from June - Nov and once in 30 days from Dec - May) with watering 10 to 15 ltrs /per Sqmt/per day basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides (once in a month) by manual excluding cost of fertilizers & water.

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Maintenance of shrubs, other ornamental foliage, foliage planting and Trees planting including watering, weeding, application of fertilizers and pesticides, trimming etc for One month 1 Sq.m/ Month Propossed Tree

Maintenance of shrubs, other ornamental foliage, foliage planting and Trees planting including watering, weeding, application of fertilizers and pesticides, trimming etc for One month 1 Sq.m/ Month Existing Tree

Maintenance of shrubs, other ornamental foliage, foliage planting and Trees planting including watering, weeding, application of fertilizers and pesticides, trimming etc for One month 1 Sq.m/ Month Ground covers

Development of Miyawaki Forest: (Dense Forest) Cost includes the following works: Soil assessment & study to determine most suitable soil nourishment Materials. Excavation of the soil up to a minimum depth of 1 meter with earth Movers. Mixing the organic Materials with the soil ( including Red Soil wherever necessary) like cocopeat, Paddy husk, vermi- compost, Hay Mixing the layout & fixing the tree locations, planting of 3 nos of Nativity tree saplings in one Sq.m. Adding of Organic fertilizer to the plants. The entire forest floor will be covered with mulch during forest creation with Most appropriate soil mulching material including Support Sticks for sapling that need support during initial growth and Manpower for all forest creation related work with necessary tools and equipments and including maintenance of One year

Preparation of Mounds of various size and shape by availlable excavated/ Supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer - in - charge.

Planting of Pandanus ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Lilly – Zephyranthus lilly (Rain lilly)shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Russelia foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge..

Planting of Costus Igneus shrub variety of height 50-60 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Planting of Hymenocallis Litorals shrub variety of height 50-60 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Planting of Hemerocallis Fulva shrub variety of height 50-60 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Planting of Pandanus Veitchii shrub variety of height 50-60 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Planting of Bamboo grass ornamental foliage shrub variety of height 30-45 cm in polythene bag of size6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Purple Fountain Grass – Pennisetum setaceum 'Cupreum' foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Canna indica varigated Plant foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Heliconium foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Saccharum Munja shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Bacopa Monnieri shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Arundinella Brasiliensis shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Bombax grass variegeta tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Bombax)

Supplying and Planting of Bamboo grass variegeta tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Bamboo grass variegeta tree)

Supplying and Planting of Black Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Black Bamboo tree)

Supplying and Planting of Budha Belly Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Budha Belly Bamboo tree)

Supplying and Planting of Cane Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. Cane Bamboo tree

Supplying and Planting of Golden Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Golden Bamboo tree)

Planting of Travellers palm ornamental foliage Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Bismarckia palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Caryota palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Cyrtostachys renda (Red Lipstick palm) palm variety of height 180-210 cm in polythene bag of size 16x16 inch, including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Dypsis lutescens (Areca palm) palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Kentia palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Livistona rotundifolia palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Picharidia palms variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Raphis palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Roystonea regia (Royal palms) palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Seaforthia elegans palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge..

Supplying and Planting of Witchie meril gold palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Supplying and Planting of Witchie meril green palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Supplying and Planting of Wodyetia bifurcata (Foxtail palms) palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying of plastic Potted plants Areca palms size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site incharge.

Supplying and Planting of Cypress Species variety of height 150-180 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Callistemon Species variety of height 150-180 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Morus Alba variety of height 150 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Moringa variety of height 240 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Colocasia Esculenta variety of height 30-45 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Alocaseia Species variety of height 30-60 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Rotala Indica variety of height 30-45 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Caltha Palustris variety of height 30-45 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Typha Angustifolia variety of height 30-45 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Typha Latifolia variety of height 30-45 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Cyperus Papyrus variety of height 120-160 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Cyperus Alternifolius variety of height 120-160 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Water Heliconia variety of height 60-90 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Nasturtium (Watercress) variety of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Acorus Calamus Variegatus variety of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Sagittaria variety of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Ludwigia variety of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Nymphoidies Indica of height 180-210 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Hydrilla Verticillata of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Vallisneria Natans of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Kyllinga Bulbosa of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Trapa Natan (Indian Water Chestnut) of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Calla Lilies of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Pistia Stratioties (Water Lettuce) of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Cabomba of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Heteranthera Reniformis of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Chamaegigas Interpid of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Phyllanthus Fluitans of height 30-60 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Nelumbo Nucifera of height 30-45 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Nymphaea Species of height 30-45 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Lemna Species of height 30-45 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Luronium Natans of height 30-45 cm in polythene bag of size 16x16 inch, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Stone Pitching in Side of pond

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)

Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables suitable for working voltage upto and including 1100 Volts complete as required and as per specifications. 2 x 6 sq.mm

Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables suitable for working voltage upto and including 1100 Volts complete as required and as per specifications. 4 x 6 sq.mm

Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor wires in existing conduits including end terminations with copper lugs. 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires

Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor wires in existing conduits including end terminations with copper lugs. 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper conductor wire

Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep including all accessories complete as required and as per specifications. 25 mm dia GI conduit

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 250mm dia

Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other accessories as required. 63 mm dia, 2mm thick

Supply, erection, testing and commissioning of M high Tubular pole as per Technical specifications and with following components :- Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double sheathed wire including terminations. 6 meters high tubular pole with single arm of length 1.5 meter, smoothly curved making an angle of 10 deg to 15 deg with the horizontal plane complete as required.

Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of WATER BODY LIGHT as per specifications,complete in all repects

SITC of 8W 1005mm LED bollard with options of 3000K, 4000K, 5700K 240Vac CRI >80 MacAdam step 3 Light Distribution 360° Electronic driver ON/OFF should be at least IP rating IP65, Should be made up of Extruded aluminium bottom pipe (grade 6063 with test certificate) Ø100 x 2.5mm thickness & die-cast aluminium top cover (grade ADC12 with test certificate). SS fasteners. clear silicone gaskets. Die-cast aluminium mounting plate (grade ADC12 with test certificate) Ø161 x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD 55 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Mechanical resistance IK08. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. Clear polycarbonate diffuser with controlled downward light emission. Lamp fixed position. This luminaire should contain built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 2.5KV. CE and BIS. K Lite Model KL-5568 or equivalent to LT/Unilamp/Ligman

SITC of decorative post top light made up Spun aluminium top cover Ø400 mm of 1.6mm thickness, die cast aluminium decorative knob on top, Mild steel ( Sand Blasting with zinc primer supporting arm integrated with die-cast aluminium base suitable for mounting Ø76mm OD pipe. SS fasteners. Luminaire should be given Acid treatment & then coated with pure polyester powder coating for long lasting paint. Should have minimum Dimension of Ø400 x 807mm, Clear acrylic diffuser with controlled downward light emission. Lamp at fixed position. Power consumption should be between 30W at steady state full intensity luminaire, the minimum delivered luminous flux of the luminaire should be 125 lm/W for 3000K Asymetric distribution. The ingress protection is IP65 and impact resistance of IK06. The luminaire should be integrated with high power module with CRI≥80, SDCM≤3. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire >56,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >88%, power factor >0.96, THD <10%, Surge protection 6KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, IES, LM 79, LM 80, & TTC certificates should be provided from in house/ 3rd party NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS. Approved. K Lite Model KL-4521 or equivalent to LT/Unilamp/LigmanT

Supply, Installation, assembling, connection, testing & commissioning of Static White 3000K surface mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 10W to 12W at steady state full intensity luminaire should have minimum luminous flux of 900 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, C3050Hz single phase ac supply. Luminaire dimension : 113mm length x 73 mm Dia x 330mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. TLuminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, IES, LM 79, LM 80, & TTC certificates should be provided from in house/ 3rd party NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS. K Lite Model KL-4267 or equivalent to LT/Unilamp/Ligman

Supply, Installation & Commissioning of Solar PV stand alone Street Lighting System comprising of two 37 Wp / one 74 Wp SPV module, one 12 V, 75 Ah Tubular Plate sealed maintenance free VRLA Gel Battery, one luminaries with inbuilt inverter, dusk to dawn circuit for automatic switching on & off at dusk & dawn and 24 W LED Light, pole, one charge-regulator, module mounting structure, Pole mounted Battery box, cables and other fittings along with 5 (five) years guarantee / warranty period (25 years for SPV Module).

SITC OF Surface Mounted luminaire Zing with LED (Light Emitting Diode) system power: 12 W, Luminous flux of luminaire 1320 lm, Colour temperature of 4000 K, neutral white, CRI > 80, , SDCM<3 , R9>0 , THD<10% 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, Opal protruded diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, electronic control gear, Protection class II, IP 20 Ø = 170 mm, H = 43 mm

SITC OF Recessed downlight Blaire with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 18W, Luminous flux of luminaire 1980lm, Colour temperature of 4000 K, Neutral white, CRI>80, , SDCM<3 , R9>0 , THD<10% 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in pre-cast die aluminium, Polyester powder-White coloured coat applied over a 5-stage pre-treatment trim,deep recessed Prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, electronic control gear. Protection class II, IP 20 Ø = 171 mm, DA(Ø) = 160 mm, H = 59 mm

Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 40W Luminaire on existing 4 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light fixture on pole.

Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 8W/MTR LED strip light as per specifications,complete in all repects including nipple for fixing of Light fixture on pole.

Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel fabricated with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure protection, as per IS-2137(Revised), floor mounting free standing on a suitable massanory pedestal outdoor type panel,provided with hinged detachable and lockable outer opening doors with the following incoming/outgong MCCB/ MCBs mounted therein including making connections/ interconnections, earthing, painting etc. as required.The panel shall have canopy arrangement on the top.All MCB to be C curve . Feeder Pillar - X The incoming shall comprise the following :-1 No 63 A FP MCCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT. Metering for incoming: Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459, with CT as required. Bus Bars 80 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 1.2 sq.mm./amp. Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral link ): 18 nos 25A DP MCB 10 KA breaking capacity controlled by and including providing 40 DP MCCB, 40 A DP contactor and Timer on each phase Feeder Pillar - X described as above and all as per specification.

MAIN PANEL Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel fabricated with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure protection, as per IS-2137(Revised), floor mounting free standing on a suitable massanory pedestal outdoor type panel,provided with hinged detachable and lockable outer opening doors with the following incoming/outgong MCCB/ MCBs mounted therein including making connections/ interconnections, earthing, painting etc. as required.The panel shall have canopy arrangement on the top.All MCB to be C curve . Incoming The incoming shall comprise the following :- 1 No 100 A FP MCCB, 25 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT.Metering for incoming: Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459, with CT as required. Phase indicating lamps RYB with 2 Amps SP MCB back up. Bus Bars 125 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 1.2 sq.mm./amp.Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral link ): 6 nos 63A 4P MCCB 16 KA breaking capacity controlled MAIN PANEL described as above and all as per specification.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories and effecting proper connections. Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories and effecting proper connections. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet

Supplying and fixing of RJ-11/RJ 45 (Both Twin socket)I/O Telephone outlet with shutters along with suitable base plate,key stone and surface/concealed back boxes of adequate module size, etc comple in all respect.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required 2 pair

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required 2 run of cable

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.(25 mm )

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required ( 25 mm)

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit.

Providing & lowering the following size PVC pipes with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC. (By DTH/ Rotary)

Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.

M.SARAVANAN (BID ID -1106620)