Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC | ₹9.5 L | L1 | Accepted-AOC LOW Rate Quted |
| 2 | L2₹9.7 LRejected-Finance 16 1 SANJAY COMPLEX PHASE NO II NEAR HAJELA HOSPITAL BHOPAL DISTT BHOPAL M P | BHOPAL | BHOPAL | MADHYA PRADESH | ₹9.7 L | L2 | Rejected-Finance Hight Rate Quoted |
| Sl No | Description | Qty | Unit | MAA SHARDA ELECTRICALS L1 | SIDDHI VINAYAK ELECTRICAL L2 |
|---|---|---|---|---|---|
| 1.00As per BOQ data | |||||
| 1.01 | 3000012331-XLPE aerial bunch
Supplying & drawing/laying of PVC insulated XLPE aerial bunch
power cable conductor H2/H4 grade aluminium solid/stranded conforming to
IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of
approved make in air with necessary material as per specification of
required size as mentioned below – Single core cable(insulated neutral
messenger)2x25 sq.mm, 1x16(insulated neutral messenger) AS PER
MPPWD SOR
2024 | 410 | M | 221 ₹90,610 | 221 ₹90,610 |
| 1.02 | 3000012353-Spring loaded
Supplying &fixing of spring loaded busbar screwless connector with
enclosure of approved make including required clamp, nut, bolt,
connection, testing as per specification to complete the job.
Single phase 1Ph, 1In+2Out AS PER MP PWD SOR 2024 | 13 | Each | 1,700 ₹22,100 | 1,700 ₹22,100 |
| 1.03 | 3000012347-Suspension clamp
Supplying & fixing of aerial bunch cable accessories suspension
clamp i/c required attachment for single core cable of approved make on
pole with clamp, necessary material as per specification for required
size. AS PER MP PWD SOR 2024 | 13 | Each | 100 ₹1,300 | 100 ₹1,300 |
| 1.04 | 3000012348-Tension clamp (dead end)
Supplying &fixing of aerial bunch cable accessories tension clamp
(dead end) i/c required attachment for single core cable of approved
make in air with clamp, necessary material as per specification for
required size. AS PER MP PWD SOR 2024 | 6 | Each | 140 ₹840 | 140 ₹840 |
| 1.05 | 3000012349-Piercing connector
Supplying & fixing of waterproof insulation piercing connector for
aerial bunch cable i/c required attachment for single core cable of
approved make in air with necessary material as per specification of
required size as mentioned below – Main:16-95sq.mm, tap:1.5-50sq.mm
AS PER MP PWD SOR 2024 | 30 | Each | 130 ₹3,900 | 130 ₹3,900 |
| 2.00 | 1000007201-G.I pipe Bracket 1,1/2"dia5'
Supply and installation of G.I.pipe bracket 1 1/2" dia 5" long bend at
45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5
cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia | 15 | Nos. | 750 ₹11,250 | 750 ₹11,250 |
| 3.00 | 1000004965-90 watt LED
Supply and fixing of high efficiency LED street light luminaries with
high pressure die cast aluminum body (make embossing on body) with
toughened glass cover on existing electric pole. The fitting should be
IP66 and above, IK-08, with power factor >0.95 The color temp of the LED
should be 5000 K - 5700 K with color rendering index >70. THD less then
10%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 90 w ± 5W. The LED fitting
should have L70 life of more than 50000 burning hours at 35 degree
ambient temp. Surge protection should be more than 4 KV internal and
10KV external. housing internal diameter of LED Street light must be of
40-60mm Minimum weight of fitting should be 4 KG The LED should have
individual optic lenses and bat wing photometry suitable for street
light. length upto 2 mtr of connection cable The LED fitting should be
provided with 5 years guarantee for free repairing/maintenance or
replacement of LED light fitting, LED, driver, surge protector,
toughened glass/ and all type of physical/ technical damage etc. on
stamp paper with service center details. LM79-80 report with batch no.
of supply must be supply at the time of delivery, BIS certificate is
must be submitted with catalogue/ model no. Spare part list of driver,
cover and LED must be submitted before manufacturing, LED manufacturer
must be accrediated in house NABL. | 15 | Nos. | 3,600 ₹54,000 | 3,650 ₹54,750 |
| 4.00 | 3000004801-250 watt LED Flood light
Supply and fixing of high efficiency LED flood light luminaries with
high pressure die cast aluminum body (make embossing on body) with
toughened glass cover on existing electric pole. The fitting should be
IP66 and above, IK-08, with power factor >0.95 The color temp of the LED
should be 5000 K - 5700 K with color rendering index >70. THD less then
10%. The total system output should be not less than 110 lumens/ watt
& total wattage should not be more than 250 w ± 5W. The LED
fitting should have L70 life of more than 50000 burning hours at 35
degree ambient temp. Surge protection should be more than 4 KV internal
and 10KV external. housing internal diameter of LED Street light must be
of 40-60mm Minimum weight of fitting should be 4-5 KG The LED should
have individual optic lenses and bat wing photometry suitable for street
light. length upto 2 mtr of connection cable The LED fitting should be
provided with 5 years guarantee for free repairing/maintenance or
replacement of LED light fitting, LED, driver, surge protector,
toughened glass/ and all type of physical/ technical damage etc. on
stamp paper with service center details. LM79-80 report with batch no.
of supply must be supply at the time of delivery, BIS certificate is
must be submitted with catalogue/ model no. Spare part list of driver,
cover and LED must be submitted before manufacturing, LED manufacturer
must be accrediated in house NABL. | 16 | Nos. | 12,000 ₹1.9 L | 12,500 ₹2 L |
Tender Value
₹9.9 L
EMD Value
₹10,000
Closing Date
19 Dec 2024, 5:00 pmClosed
Ashish shrivastava
ISBT Govindpura Bhopal Electric Section
Lighting arrangement from Sabji mandi bagsewaniya adjacent to BCCL depo in Ward No. 54 Bhopal
2024_UAD_386387_1
2020224305
Open Tender
Electrical Works
30 days
ISBT Govindpura Bhopal Electric Section
as per as tender document
9 documents required · 9 mandatory
₹2,000
₹10,000
13 Jan 2026
5 Dec 2024
20 Dec 2024
5 Dec 2024
19 Dec 2024
5 Dec 2024
Amount
As per BOQ data
3000012331-XLPE aerial bunch Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below – Single core cable(insulated neutral messenger)2x25 sq.mm, 1x16(insulated neutral messenger) AS PER MPPWD SOR 2024
3000012353-Spring loaded Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job. Single phase 1Ph, 1In+2Out AS PER MP PWD SOR 2024
3000012347-Suspension clamp Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. AS PER MP PWD SOR 2024
3000012348-Tension clamp (dead end) Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size. AS PER MP PWD SOR 2024
3000012349-Piercing connector Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below – Main:16-95sq.mm, tap:1.5-50sq.mm AS PER MP PWD SOR 2024
1000007201-G.I pipe Bracket 1,1/2"dia5' Supply and installation of G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia
1000004965-90 watt LED Supply and fixing of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass cover on existing electric pole. The fitting should be IP66 and above, IK-08, with power factor >0.95 The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 10%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 90 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KV external. housing internal diameter of LED Street light must be of 40-60mm Minimum weight of fitting should be 4 KG The LED should have individual optic lenses and bat wing photometry suitable for street light. length upto 2 mtr of connection cable The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass/ and all type of physical/ technical damage etc. on stamp paper with service center details. LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/ model no. Spare part list of driver, cover and LED must be submitted before manufacturing, LED manufacturer must be accrediated in house NABL.
3000004801-250 watt LED Flood light Supply and fixing of high efficiency LED flood light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass cover on existing electric pole. The fitting should be IP66 and above, IK-08, with power factor >0.95 The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 10%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 250 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KV external. housing internal diameter of LED Street light must be of 40-60mm Minimum weight of fitting should be 4-5 KG The LED should have individual optic lenses and bat wing photometry suitable for street light. length upto 2 mtr of connection cable The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass/ and all type of physical/ technical damage etc. on stamp paper with service center details. LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/ model no. Spare part list of driver, cover and LED must be submitted before manufacturing, LED manufacturer must be accrediated in house NABL.
Bidder Name
Amount
MAA SHARDA ELECTRICALS (GSTN-23BHVPG8485Q2Z6) BID ID -1158330
SIDDHI VINAYAK ELECTRICAL (GSTN-23AQSPP6378G1Z8) BID ID -1158392
SIDDHI VINAYAK ELECTRICAL (BID ID -1158392)
SIDDHI VINAYAK ELECTRICAL (BID ID -1158392)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid