PROVN OF FALSE CEILING PANELLING AND ALLIED WORKS FOR ROOM NO 95, 97 AND 98 OF BLDG NO P 84 AT HQ CENTRAL COMD AND OTHER SANCTIONED WORKS AREA OF AGE B/R I UNDER GE (EAST) LUCKNOW

Amount

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over one coat of wall care putty of wall including preparation complete all as specified and directed.

M&L for preparation of old surfaces and applying one coat of oil bound distemper complete all as specified and directed.

S&F for anodized 50 micron powder coated aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (3 Nos), suitable handle (2 No.), hydraulic door closer etc complete all as specified & directed.

S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as specified & directed.

S&F of prelaminated particle board of 12mm thick, exterior grade, prelaminated both side with decorative choice lamination ,fixed with beading to aluminium frame work etc complete all as specified & directed.

S&F of powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed.

S&F aluminium body (Extructed section) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F anodised aluminium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass complete all as specified and directed.

S&F curtain rods, standard quality,bore not less than 25mm dia and thickness with 1.8 mm with head/ bulbs at both ends and middle support if necessary, rings etc. complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed.

S&F of 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F aluminium, anodised, barrel tower bolts 150mm of extruded section complete all as specified and directed.

M&L for preparation of old kota stone surfaces of flooring & applying Bees-wax polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

M&L of 0.9mm thickness decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in coping, benching of manholes etc and including necessary formwork complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as sub-base etc complete all as specified and directed.

S&F for vitrified ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile not exc 0.36 Sqm in floor etc laid over 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

S&F solid PVC wall lining, consisiting of 5mm thick panel with wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed

S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

M&L PU polish on wooden wall surface/wood based material of any description width of girth including removing/cleaning and preparation of the surface including a coat of wood filler with two or more coats as approved complete all as specified and directed.

S&F for rolled sections Fe-410 (Gde E-250) as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

S&F coloured prepainted GALVALUME aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering cladding to wall fixed with self taping screws including necessary washers etc all as per manufacture instruction complete all as specified and directed.

S&F false ceiling with 4mm thick E-board white prelaminated set embosed reinforced designer ceiling board of approved texture fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer complete all as specified and directed. (Note. All exposed surface of grid work shall be powder coated white).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of wall in cement motar (1:4) etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:4 with water proffing compound and finishing the surface even and smooth with using extra cement complete all as specified and directed. (Note:- WPC shall be measured & paid seperately 'Only')

M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of wall in cement motar (1:6) etc complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plaster of surfaces of wall and applying two coat of wheather proof coat with one coat of primer over 1 mm thick wall care putty on wall etc complete all as specified and directed.

M&L for preparation of newly/old surface of wall and applying two coats of plastic emulsion paint over a coat of putty over a coat of primer complete all as specified and directed.

M&L for preparation of newly/old surface of ceiling and applying two coats of plastic emulsion paint on ceiling over a coat of wall care wall putty over a coat of primercomplete all as specified and directed.

M&L for brick work old size brick sub class 'B' bricks,straight or curved on plan exc 6 m mean radius,built in in CM (1:6) etc complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan any radius half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slab supported on walls beams & columns in floors, roofs, landing complete all as specified and directed.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs & similar work not exc 200mm thick on rough finished surface of concrete complete all as specified and directed.

Use and waste of form work to edges on concrete flates, trades, breaks in floor, window cills, roof etc not exc 10 cm wide and sides RCC /PCC bend in wall, horizental or sloping and similar work exc 5 cm but not exc 15 cm wide fair finished surfaces of concrete complete all as specified and directed

M&L for stainless steel/CP/Brass letter of figure (not less than 2.5 mm thick) (block, roman,italic or Indian) size 300 mm long 50 mm width) including fixing complete all as specified and directed.

S&F for vitrified ceramic tiles double charge/dark shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm, not exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

All as per above item No. 44 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and as directed.

S&F 12 mm thick toughened glass door shutter/partition of opening size less than 4.00 Sqm in single leaf with necessary eatching including and pivot at top fancy type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom aluminium rail with suitable locking arrangement and all necessary fitting complete all as specified and directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and directed

Dismantling of timber boarding (wooden CB) any description fixed in any position fixed with nails etc complete all as specified and directed

S&F PVC cabinet shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings etc complete all as specified and directed. (Note:- Density of PVC solid sheet should not be less than 575 kg/cum.)

S&F 18/19 mm thick block boad grade 1 quality, exterior grade one side with decorative choice lamination & other side balancing white lamination including 1 mm thick sanmica fixed with screws to timber frame works etc complete all as specified and directed

S&F 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified and directed

S&F continous piano hinges of brass with width 30mm of flap complete all as specified and directed .

S&F hydraulic slider of size 8"x1"x1/2" with steel ball, Aluminium body and striking plate incld letting complete all as specified and directed

S&F stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed

S&F stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed

S&F stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed

S&F stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed

S&F stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and directed.

S&F stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and directed.

S&F stainless steel modular type basket of size 20x20x12 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0, complete, including taking down old unserviceable sink including 40mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed

S&F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc complete all as specified and directed

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situationcomplete all as specified and directed

Surface dressing not exc 15 cm deep any type of soil complete all as specified and directed

Excavating in trenches, not exc 1.5 m wide and not exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out any type of soil complete all as specified and directed

S&F 150mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints complete all as specified and directed

M&L concrete bed to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C2 and testing including necessary form work complete all as specified and directed

M&L for cement concrete1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete etc complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed

S&F for mild steel as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of Fe-410-W (Gde E-250) complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile str of 550Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed

M&L hardcore broken stone or boulder of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed

M&L for joint less non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non skid ceramic (coloured) jointless tiles of 7-8 mm (square or rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 350x250mm x 7mm thick/350x450mm x 7mm thick, laid over 15 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor/path/pavement complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (suing 40 mm graded stone aggregate) as in foundation of manholes complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in finished even and smooth witthout using extra cement as in plinth protection/path complete all as specified and directed.

S&F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F butt hinges 100mm, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F aluminium handles 150mm, cast type, anodised complete all as specified and directed.

S&F steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed.

S&F GI tubing of size 20 mm dia, medium grade, laid in floors/walls complete all as directred and speicified

S&F GI tubing of size 15mm dia, medium grade, laid in floors/walls complete all as directred and speicified

S&F vitreous china WHB White, size 450 x 300mm including cast iron brackets, 32mm bore chromium plated waste coupling waste pipe of 32mm dia all as specified and directed.

S&F vitreous china Squatting pan, indian pattern, size 580 x 440mm white, with integral foot rest in cluding 'P' or 'S' trap complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F PVC connection 450mm long with brass nuts and PVC washer complete all as specified and directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F 10 ltr capacity PVC low level flushing cistern including brackets complete all as specified and directed.

S&F bib taps 15 mm chromium plated fancy type, cast copper alloy screwed pressure,screwed both ends for iron pipe for unions complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F stop valves/angle volve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and directed.

S&F of 75mm dia PVC floor trap with grating fixed in position complete all as specified and directed.

M&L for PVC (SWR) pipes 110mm dia laid in floor or in trenches, single socketed with rubber ring joints including dismantling of old pipes complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F glass corner shelf with CP bracket fixed to wall complete all as per manufacturer's instructions complete all as specified and directed.

S&F health faucet for EWC CP hand hold with flexible pipe complete set complete all as specified and directed.

S&F 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union add if fixed complete all as specified and directed.

S&F tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash on wall complete all as specified and directed.

M&L hume pipe septic tank 10 users, exc in hard soil, foundation in PCC 1:2:4 including RCC precast manhole covers having 6mm plate embedded all around /fiber reinforce cover, RFR/Removal of soil etc complete all as specified and directed.

M&L for Soakage well, in hard soil, foundation in PCC 1:3:6 wells of honey combed bricks work in CM, RCC Cover slab Filling with bricks bats, complete of size 1.80M dia X 3.00M deep complete all as specified and directed.

Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified, drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal modular box for mounting of modular inner plates of thickness 1.6mm thick terminal boxes concealed on wall/fllor/ceiling, for fixing of switches/socket/regulator complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash complete all as specified and directed.

All as per item No 116 above but 1.5 sq mm wire for calling bell with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

All as per item No 116 above but 1.5 sq mm wire for one 5 Amps socket outlet same board with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

All as per item No 116 above but 1.5 sq mm wire for one 5 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

All as per item No 116 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.

Supply and fixing for socket outlet multipurpose 2-in-1, 5 pin 6 Amps, 230 Volts modular type complete all as specified and directed.

Supply and fixing for socket outlet multipurpose 2-in-1, 6 pin 6 /16 Amps, 230 Volts modular type complete all as specified and directed.

Supply and fixing for modular switch 1 way 6 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing for modular switch 1 way 16 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing inner plate & white cover plate with frame, 2 modules complete all as specified and directed.

Supply and fixing inner plate & white cover plate with frame, 3 modules complete all as specified and directed.

Supply and fixing inner plate & white cover plate with frame, 4 modules complete all as specified and directed.

Supply and fixing inner plate & white cover plate with frame, 6 modules complete all as specified and directed.

Supply and fixing inner plate & white cover plate with frame, 8 modules complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified

Supply and fixing MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and Fixing MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

Supply and fix Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed.

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 4 sq mm and one run of 2.5 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 6 sq mm and one run of 2.5 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

S&F call bell push ,modular type, 2 module 240 volt, complete all as specified and directed.

S&F Red and Green light including all necessaey fittings,bulbs and accessories and wiring complete all as specified and directed.

S&F ceiling fan regulator for 1200mm/1400mm sweep electronic rotary type single module 120/280 volts complete all as specified and directed.

S&F wall mounted fan, 400 mm sweep, 230 volt, single phase, complete all as specifiedand directed.

Supply and fixing LED tube light along with suitable fitting fixture including one number of 20 watt 4' LED tube complete all as specified and directed.

Supply and fixing 2'X2' 36 Watt LED Ceiling Light Fitting exquisitely designed luminaire which is bound to deliver extra lumen thruogh its pure form and glare-less light Recessed full open (120 lumen /watt).

S&F Wall mounted fancy lights single end brass coated 12-15 watt complete all as specified and directed.

S&F LED mirror light 10W along with fixture complete all as specified and directed

S&F sheet metal enclosure including MCB 20 Amp rating complete all as specified and directed.

Gaurav Enterprises

M/S KAUSHIK CONSTRUCTION

m/s raghubar dayal

ANIL CONSTRUCTION

M/S AADI ENTERPRISES

Rakesh Traders

KUMAR ENTERPRISES

QUALITY CONSTRUCTIONS CO

Abode Artisan Enterprises

M/S SWATI CONSTRUCTION