Repair of Core of Lifts for installation of New Lifts at A2 South Block Bahu Plaza, Jammu 2nd Time

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqmand under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement basedpolymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade

Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Demolishing mud phaska in terracing and disposal of material within 50 meters lead

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

10cm thick (average) mud phaska of damped brick earth on roofs laid toslope consolidated and plastered with 25 mm thick mud mortar mixedwith bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1clay: 1 cow dung) and covered with specified tile bricks grouted withcement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of classdesignation 10.0

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent.

Carriage of mateial Sand upto 7 Km

Carriage of mateial Aggregates upto 7 Km

Carriage of mateial Bricks Tile upto 7 Km