REPAIR / MAINT OF CERTAIN ROADS / FOOTPATH IN THE AREA OF AGE B/R I UNDER GE (WEST) LUCKNOW

Amount

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg/10 sqm complete all as directed.

M & L for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) by using paving bitumen, VG 30 @ 4% by weight of total mix complete all as specified and directed.

Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud,or water, scoring sunken suface in roads, paths etc cutting around the edges to at least 25mm in depth marking good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8Kg per 10Sqm, blinded with 0.09Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and as directed.

M & L for 30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compactad to required camber and gradient complete all as specified and as directed.

Providing & fixing as in repair of "Cat Eyes " of size not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like n. exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

M/s Ram Singh Agarwal (BID ID -3122652)

M/s SHIVAM CONSTRUCTIONS (BID ID -3133660)

R K CONTRACTOR AND SUPPLIERS (BID ID -3133386)