TTPS Operation Circle CAD Complete Servicing of Electrical Panels of 10 Ton gantry crane including provision of control panels, renewal of wiring and worn out spares etc., at CWPH II

Charges for de terminating the power & control wiring from the local existing control panel, Dismantling the control panel and unloading from crane platform to ground.

Charges for Servicing of Electrical Panel of 10 T / 15 T Capacity electrical Hoist including renewal of wiring and renewal of spares.

Charges for transporting the newly fabricated control panel from ground to hoist elevation, fixing the same re termination power and control cable and checking the operation of the hoist to the satisfaction of field engineer in-charge.

Charges for fabrication of control panel outdoor type with 16 SWG CRCA, making proper entry for incoming and outgoing cables, front side opening with double door arrangement with lock and key rubber beads for door including consumables, T & P, hire charges etc.,

Releasing of existing damaged 3 c * 10 sq.mm LTUG. Copper armoured cable from main box at ground level to crane platform level main box (upto 15m is 10% extra)

Laying of new 3 c * 10 sq.mm LTUG. Copper armoured cable from main box at ground level to crane platform level main box ( upto 15m is 10% extra)

M.S. Sheet (1.6 mm thick)

3 c * 10 Sq. mm copper armoured cable

On- Off delay timer coil 110 v AC 50 hz 0.05 s to 60 s

Control transformer 415/110 V 500 VA 1 phase

Pendent box with push buttons and elements.

Limit switch (1 NO + 1 NC)

MCB 100 A 3 pole

MCB 63 A 3 pole, 415 V AC

MCB 16 A single pole 240 V AC

100 A TPN switch disconnector fuse unit in sheet steel enclosure with HRC fuses double break

Disconnector fuse switch 250A,415V,3Phase type:FN-TPN

Power contactor 110 A (2 NO+2 NC) 110 V AC

Lighting control transformer 415/230v AC 350 VA 1 phase

Terminal block 2.5 Sq.mm

A. SUDALAIMUTHU CONTRACTOR (BID ID -1113431)