REPAIR MAINT OF HARD STANDING FLOORING ROOF JOINERIES AND PERIODICAL SERVICES TO CERTAIN BUILDINGS IN ZONED D AREA UNDER GE (EAST) MATHURA

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick cement concrete type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in levelling course etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

M&L for double charged Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 5 here in before but as in skirting/dado laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

S&F Vitreous China wash basin, white, (flat back or angle back type) any size including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling for 32mm bore pipe discharge pipe including waste pipe complete all as specified and as directed.

S&F in repair wash down water closet pan (Pedestal Pattern) complete (exlcuding flushing cistern and flush pipe) pedestal pan and trap including plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel hinge chromium plated including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete and 10 ltr capacity PVC valveless syphonic action type low level flushing cistern white, with inlet, bell valve, float, handle and 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern Low level of 10 litre capacity, white with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair Hand jet health faucet 15 mm bore with 8mm dia and 1.2 m long flexible tube and wall hook and connected fittings completed all as specified and as directed.

S&F in repair sink mixer 15 mm bore with extended swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and as directed.

S&F in repair bib taps cast copper alloy chromium plated fency type with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair angle cock cast copper alloy chromium pated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore dia iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs wall mixer 15 mm bore with connector, including hand shower and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower complete all as specified and as directed.

S&F in repair Basin Mixer 15mm bore dia without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed.

S&F in repair pillar taps, cast copper allloy, with capston heads, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shank and fly nuts, screwed fo iron pipe 15mm bore dia of pipe complete all as specified and as directed.

S&f in repair two way bib cock cast copper alloy chromium plated superior quality with wall flange fixing to 15 mm bore dia pipe complete all as specified and as directed.

S&F in repair stop valve cast copper alloy fancy type, chromium plated with long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle scrwed both ends for 15mm dia bore iron pipe or union complete as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat oil bound distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for providing 1mm thick wall care putty on plastered surfaces of walls complete as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster of any description from brick wall or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC as per manufacturers instructions finishing the surface even and fair complete all as specified and as directed. Note : Liquid WPC shall be mesured & paid separately under relavent item of this BOQ.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of Brick work or concrete surface in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on ceiling surface in cement mortar 1:3 finishing the surface even and fair complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls, providing 1mm thick wall care putty to achieve smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls and and applying two coats of weather proof acrylic exterior paint dark shade over a coat of primer (100% Acrylic) complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for 50mm thick sand stone slab as in chajja & cover slab set and jointed over joists in cement mortar 1:4 complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist,angle, channel section and sandstone slab in chajjas upto G+2 floors and finishing face of groove with cement mortar 1:3 complete all as specified and as directed.

S&F rolled mild steel in joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 W Gde E-250 quality 'B' including applying two coats of spynthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, kerbs, roof padding etc as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separatly, relevent item(s) of this BOQ.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Kg /Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit/STP/CICA as approved by GE.

M&L for repairing the edge/corner of chajja/roof projection, ceiling and similar work by removing plaster width/girth exc 200 mm but not exceeding 300 mm and making good with plaster in two coat, comprising 10 mm thick dubbing coat in cement mortar 1:3 and finishing coat 10 mm thick in cement mortar 1:3, including providing chicken mesh wire netting 25, gauge, 20 mm mesh, between dubbing coat & finishing coat, match with existing surface complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ceilings and applying one coats of weather proof acrylic exterior paint (100% Acrylic) with spray machine, spray hard to reach entire area to achieve excellent application using limited manpower, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note : (i) WPC exterior paint shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum pursue of 3300PSI. (ii) The work shall be got execute through approved applicater of paint manufactures.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork using old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 100mm cast iron sanitary connection 'S' branch with branch 370 to 450mm long excluding joint complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls with and including necessary clamps complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls with and including including necessary clamps etc complete all as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls preparation of surface and applying two coats of cement base paint complete all as specified and as directed.

S&F in repairs 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets, stops, rollers end caps etc. complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane including the old broken sheet glass complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking down shutters from frames) area exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sqm not exceeding 2.0 sqm each complete all as specified and as directed.

M&L for Pressed steel frames of size125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed complete all as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L cement concrete type C-0 1:3:6 (using 12.50mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of back of pressed steel frame etc. complete all as specified and as directed.

S&F 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel veneer type on both side complete all as specified and as directed.

S&F 35mm thick factory made IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium handles of size 150mm long fabricated type anodised complete all as specified and as directed.

S&F in repair 75mm long mild steel Butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue anodised overall length of cover plate 150mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars complete all as specified and as directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars complete all as specified and as directed.

S & F 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane including hacking the old broken sheet glass complete all as specified and as directed.

M&L for repairing steel windows and ventilators hinges, brackets, steel handle, etc by spot welding at site complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board fixed to aluminium grid with screw complete all as specified and as directed.

S&F solid PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame all as specified and as directed.

Taking down aluminium door shutter any size dismantiling stiles and rails refixing the same using same materials including glass sheet and partical board sheet with replacement of 6mm dia GI full screw to full width of shutter bolts 2 Nos one at each top and bottom with necessary cleats using screws and nuts etc. complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge or in cladding to walls, fixed with self tapping screw complete all as specified and as directed.

Taking down of old aluminium shutter of any description exc 1.50 Sqm n exec 4 Sqm each and re-securing after repair locking arrangement, floor spring, adjusting bottom and top pivot complete all as specified and as directed.

S&F in repair 100 mm size mortice lock of brass, vertical type, 4 levers, complete all as specified and as directed.

S&F Aluminium frame/Aluminium grills powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F 5 mm thick sheet glass ordinary quality and glazing with aluminium beading n exc 0.50 Sqm in each pane complete all as specidfied and as directed.

M&L Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F 75mm aluminium barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and as directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for sand cushioning 25 mm thick spreed over cement concrete surface complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

M&L for Precast cement concrete factory made road side kerbs block of mix 1:3:6 type C-1 (using 20 mm graded stone aggregate) n exc 100 mm in width and jointed in cement mortar 1:4 complete all as specified and as directed.

M&L for glossy finish chequred cement concrete tiles of size 30cm x 30cm x 25mm with grey cement and pigments, set jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Dismantling timber scantlings (framed work) 40 sqcm and over in section, in any position complete all as specified and as directed.

S&F rolled mild steel work in tubular trusses, verical posts including special shaped washer including purlins, rafters, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. using EWR or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F welded steel wire fabric of weight n exc 4 kg per Square metre supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks, hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) hanging also fastening and fixing complete of FE 410-W (Gde-E-250) qualit A complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

Supply and fix in repair rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) 1000 liters capacity white colour triple layer, hoisted and fixed on roof in position including all connections complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

S&F 15 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F 20 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20 mm iron pipe complete all as specified and as directed.

S&F in repair stainless steel Towel Rail 20mm bore dia and 600 mm long complete all as specified and as directed.

S&F waste coupling of cast copper alloy chromium plated for 32mm bore discharge pipe (half or full threaded) (minimum weight 45gms) complete as specified and as directed.

S&F stainless steel grating doom 100 mm dia (min weight 25 gms) complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

S&F in repair rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) 500 liters capacity white colour triple layer, hoisted and fixed on roof in position including all connections complete all as specified and as directed.

S&F 25 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair 20 mm bore GI Union complete all as specified and as directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 20 mm bore 6 inch long Nipple all as specified and as directed.

S&F in repair 20 mm bore 4 inch long Nipple all as specified and as directed.

S&F in repair 20 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore GI Tee complete all as specified and as directed.

S&F in repair 15 mm bore GI Union complete all as specified and as directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 15 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore 125 mm long Nipple all as specified and as directed.

S&F in repair 15 mm bore 100 mm long Nipple all as specified and as directed.

NAYYAR BUILDERS N ENGINEERS

B S ENTERPRISES

VASUNDHARA AND COMPANY

ARCHI ENGINEERS

Deepak Saxena

M/s Hoti Lal Contractor