SPECIAL REPAIRS/REPLACEMENT OF EXISTING DAMAGED WOODEN WINDOWS WITH ALUMINIUM SLIDING WINDOWS OF JCOs/OR MD ACCN OF BAIRD BARRACK UNDER GE (SOUTH) BANGALORE

Amount

Taking down chowkat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.

S&F aluminium anodised frame for doors, windows vetilators with one of more rebates including joining cleat for fixing etc, with powder coating in straight or curvead frame complete all as specified and directed.

M&L for powder coated aluminium window sliding on three tracks, including aluminium shutter of standard sections of approved make and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws, anodised aluminium fittings such as locking arrangements, rollers etc complete all as specified and as directed. Aluminium sections shall be smooth,rust free, staright, mitred and jointed mechnically wherever required. (Note - Minimum thickness of powder coating shall be 50 micron)

S&F sheet glass 4.8mm thick ordinary quality, not exc 0.5 sq. m in each pane in squares or curved / circular, complete all as specified and directed.

S&F sheet glass 4.8mm thick ordinary quality, exc 0.5 sq. m each pane complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 3 mm thick figured glass pin headed type and glazing with oil putty or fixed with metal frame in square and circular or curved n.exc 0.50 Sqm in each pane complete all as specified and directed.

Demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L precast cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in cement mortar (1:6)complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) including finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) including finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of Acrylic distemper of white or tint over primer with and including 1mm wall putty on plastered surface to match the existing adjacent surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer to match with the existing adjacent surface complete all as specified and directed.

S & F framed work such as grills, gratings, support brackets etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165 complete all as specified and directed.

Cutting holes in brick/stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete (1:2:4) Type B-1 using 20 mm graded crushed stoen aggregates not exc 300mm deep complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as specified and directed.

K. VENKATESH NAIDU (BID ID -3242513)

SRI LAKSHMI ASSOCIATES (BID ID -3242562)

K T ASSOCIATES (BID ID -3248427)