Repir of playground Equipment Open Gym Painting Electrical Light Arragements at Muthu Nagar Beach for Pongal Holidays in East Zone

Amount

Dismantling Exisiting Damaged Tiles Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete complying with standard specifications SS 20B

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including mixing, laying concrete and labour charges and all incidential charges such as water , curing etc., complete as per standard specifications

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Chipping of concrete and roughening the surface work including all cost of conveyance charges etc., complete as per standared specification.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Hiring of JCB for Disposing Sand at disabled Persons Sea tack The Rate includes, cleaning, Pipe laying, Driver Charges, labour charges and all incidential charges cost and conveyance of all materilas charges etc,complete

Hiring of Tractor for Disposing Sand at disabled Persons Sea tack The Rate includes, cleaning, Pipe laying, Driver Charges, labour charges and all incidential charges cost and conveyance of all materilas charges etc,complete

Supply and erection of Street Light 48Watts LED Street light fittings with LED (LED OUTDOOR FITTINGS)(LIGHT EMITTING DIODE) includes all cost and conveyence of materials and labour charges etc.,

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator) (SD - 25)

Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour With priming coat for Exterior Emulsion Paint - Water Based Primer (Liquid )including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m S.No 358

Painting Two Coat with Ready Mixed Enamel Paint over the Old Iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Paving the floor with Vitrified Marbonite tiles of stain free nano polish approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

For Out Chamber 110 mm

110mm dia PVC. Door Elbow

Suppling and fixing in position Ball Valve of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Suppling and fixing in position CP Two Way Bib Cock with Health Faucet (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL including all cost and conveyance of material and labour charges etc complete., SD-83

Alteration of Existing Damaged Swing using MS Channels,Angles,Plates,Round bars including all Cost Such as Cutting,Welding,grinding, and Fabrication and red oxide With Primer and Two Coat of Enamel Paint Over Iron Work etc., Complete.

Alteration of Existing Damaged Dual Platform Slide using MS Channels,Angles,Plates,Round bars including all Cost Such as Cutting,Welding,grinding, and Fabrication and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint Over Iron Work) etc., Complete.

Alteration of Existing Damaged Double Seesaw using MS Channels,Angles,Plates,Round bars including all Cost Such as Cutting,Welding,grinding, and Fabrication and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint Over Iron Work)etc., Complete.

Alteration of Existing Damaged Waist Twister (Outdoor Fitness Equipment) using MS Angles, Cheq.Plates,Round bars including all Cost Such as Lathe,Cutting,Welding,grinding,and Fabrication, Fixing and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint Over Iron Work) etc., Complete

Alteration of Existing Damaged Leg Extension (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe, Cutting, Welding,grinding,and Fabrication, Fixing

Alteration of Existing Damaged Chest Press Gym Equipment (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and

Alteration of Existing Damaged Dual Walker (Outdoor Fitness Equipment) using MS Angles, Plates,Round bars including all Cost Such as Lathe,Cutting,Welding, grinding,and Fabrication,

Alteration of Existing Damaged Back Extension (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Double Stepper (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication, Fixing and Providing painting Arrangements (red

Alteration of Existing Damaged Aero Rider (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Two Wheel Shoulder Biulder/Arm Wheel(Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Rowing (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Double Hand Rotator (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Leg Press Double (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication,

Alteration of Existing Damaged Extension Cycle (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication, Fixing and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint Over Iron Work) etc., Complete

Alteration of Existing Damaged AB Board Double (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication, Fixing and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint

Alteration of Existing Damaged Sholder Press Single (Outdoor Fitness Equipment) using MS Angles, Plates, Round bars including all Cost Such as Lathe,Cutting,Welding,grinding, and Fabrication, Fixing and Providing painting Arrangements (red oxide With Primer and Two Coat of Enamel Paint Over Iron Work) etc., Complete

Rate for Existing Damaged Airoplane using Fipper Mate laying works including all Cost Such as Cutting,Welding,grinding, and Fabrication and red oxide With Primer and Two Coat of Enamel Paint Over Iron Work etc., Complete.

Rate for ExistingAir Walker /Stroller Single PUTEX using Fipper Mate laying works including all Cost Such as Cutting,Welding,grinding, and Fabrication and red oxide With Primer and Two Coat of Enamel Paint Over Iron Work etc., Complete.

Rate for Existing Double Surf Board using Fipper Mate laying works including all Cost Such as Cutting,Welding,grinding, and Fabrication and red oxide With Primer and Two Coat of Enamel Paint Over Iron Work etc., Complete.

Rate for Existing Painting of I Love TUTY Two Coat of Spray Paint Over Iron Work etc., Complete.

smthomaiyar and son

reflection