SPL REP TO BLDG NO T-109 (DSC LINE), P-107, P-108, P-109 (SENTRY TOWER POST) AND ROOFING OF CONSOLE AREA AT NTS, PROVN OF TOILET AT CERTAIN LOCATION AT AFSSR, PROVN OF PARKING SHED AT VARIOUS LOCATIONS AT AFSSR, PROVN OF HARDSTANDING NEAR IMAC BLDG A

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed .

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm / 20mm dia bore complete all as specified and as directed .

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 20 mm agg. ) as in plinth protection / path/ any paved area complete all as spd and directed.

M&L for marble 18-20 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade of the floor slab / staircase / steps,riser incl rubbing and polishing incl rounding to edge of marble if any complete all as specified and directed.

M & L for Non Skid jointless,scratch proof& stain resistance ceramic printed coloured tiles 600x600x9-10mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M & L for Non Skid ceramic printed coloured jointless tiles 400x400x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.

M&L for Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed.

M&L for machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed.

M&L for for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with dash true nut and bolt complete all as specified and as directed.

S & F 75mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S&F 75mm bore PVC (SWR) Junction single,(single Y/T) equal or unequal complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed.

M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed wor of water tans and similar work etc complete all as specified and as directed.

S&F Mild steel, plain black sheet 1.6mm thick in door shutters,, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F factory made 30mm IInd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed.

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed.

S&F mild steel cup board 60cm depth & with sides,back& 3 shelves&partition,top bottom& mild steel door shutter Godrej pattern two leaves with frame,incl necessary fittings of 18gauge MS sheet with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings& two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

S&F 3ways sliding powder coated / anodized aluminium glazed window frame of size 88mm x 32mm x 2mm thick complete all as specified and as directed.

S&F 3ways sliding powder coated / anodized aluminium glazed window shutter with the following specification :- (a) Window Shutter with 18mm x40mm x 1.5mm section in stiles, rails (b) Supply and fix of rubber beading and with 4.8mm thick coloured glass pane one side mirror finished , area with aluminium handles and necessary locking arrangement. (c) S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed. Note : Rates are included for glass, stainless steel wire cloth and all other necessary accessoires etc.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as spd and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed ( in repair).

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick stainless steel butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed.

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed.

S&F Center hole basin mixer w/o Popup waste cat no F330014CP (HINDWARE) OR Equivalant out of makes specified in list of makes complete all as specified and as directed.

S&F Wall Mixer 15mm bore (dia), Chromium Plated, Telephonic type with Flanges including Telephonic Shower Tube 1.50 Metre long with Hook and fixing-in-repairs, complete all as specified and as directed. Cat Part No KUP-CHR-35115P of Make : JAQUAR, or equivalent out of makes specified in list of makes.

S&F wall mixer with 115 mm long bend pipe cat no F330019(HINDWARE) or equivalant out of makes specified in list of makes complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed.

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F in repair for 75 mm bore out let floor trap of cast iron with stainless steel gratings including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) concealled/surfaced complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F in repair for 75mm bore out let Nahani trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 110 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 75 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat after applying a coat of anticorrosion chemical coating upon exposed reinforcement etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) with wpc on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.

M&L for preparing plastered surface with 2mm thick Birla/Asian wall care Putty & applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.

M&L for complete removal of existing treatment and preparing of surface of wall and applying two coat of Camouflage paint over one coat of primer on plastered surface at any height complete all as specified and as directed. (Note : Pattern & Desgin of paint complete all as specified and as directed and rates are included for height upto 12 Mtr )

M&L for preparing of new surface of wall and applying two coat of Camouflage paint on plastered surface over one coat of primer at any height complete all as specified and as directed. (Note : Pattern & Desgin of paint as per direction of Engr-in-Charge and rates are included for height upto 12 Mtr ).

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed.

M & L for PCC 1:2:4 type C-2 (using 20 mm agg. ) as on roof flooring using WPC complete all as spd and directed.

M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

M&L two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent plain sheeting with self coach screw and rubber washer in roof, wall etc.or fixed with L-type or J-type or cranked hook bolts in lieu of screw and joints are to be covered with adhesive tape or sheet to be fixed in single sheet etc complete all as specified and as directed.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates complete all as specified and as directed.

S&F in repair, 3mm thick hylam sheet with screws on walls surfaces complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and inculding Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and two coat of Oil Bound Distemper over one coat of primer complete all as specified and as directed.

M & L for sand filling under floor or in foundation including watering and consolidation all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for Damp proof course 40mm thick in PCC (1:2:4), type B0 (using 12.5mm graded crushed stone aggregate) with WPC (WPC shall be measured and paid separately) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam etc complete all as specified and as directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work not exceeding 200 mm thick (horizontal or slopping ) etc complete all as specified and as directed.

M&L for formwork to soffits to edges of concrete flats, teads, breaks in floors, window, cills, concrete railing opening in concrete walls, floors and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide etc complete all as specified and as directed.

M&L for providing reinforced cement concrete M-20 design Mix (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, roof beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over, upto and including 10 mm dia as in stirrups, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63mm, with broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed including preparing of surface by removing existing treatment complete all as specified and as directed. Applications shall be done by approved applicater.

M&L for formwork to sides chullah hoods, chajja, trough and similar items including edges etc complete all as specified and as directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in chajja etc complete all as specified and as directed.

S & F 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and as directed.

S & F 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and as directed.

S&F 50 mm bore but fixed to walls including necessry GI stack clamps complete all as specified and as directed.

S & F cast iron cowls 50 mm complete all as specified and as directed.

S & F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S & F 75 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) complete all as specified and as directed.

S&F Vitreous China wash down water closet (EWC) (Pedestal pattern) white as approved including all accessories like seat cover, CP Health faucet and CP jet complete all as specified and as directed.

S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR SLS-WHT-6851S (WC) or eqivalent out of makes specified in list of makes.

S&F wash hand basin vitreous china white glazed oval type on RCC conter including, CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and as directed.

S & F toilet paper holder complete all as specified and as directed.

S & F Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S & F alive maze over head shower with shower arms of Cat Part No OHS-CHR-85859M of Make : JAQUAR, or equivalent as approved complete all as specified and as directed.

S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. MAKE : JAQUAR ALD-CHR-585 or equivalent out of makes specified in list of makes.

S & F glass self 600mm long with Cat Part No ACN-CHR-1171N of Make : JAQUAR, or equivalent out of makes specified in list of makes complete all as specified and as directed.

S & F soap dispenser with Cat Part No AKP-CHR-35735P1 of Make : JAQUAR, or equivalent out of makes specified in list of makes complete all as specified and as directed.

S & F soap dish holder with Cat Part No AQN-CHR-7731 of Make : JAQUAR, or equivalent out of makes specified in list of makes complete all as specified and as directed.

S & F towel ring with Cat Part No AQN-CHR-7721 of Make : JAQUAR, or equivalent out of makes specified in list of makes complete all as specified and as directed.

S & F Glass corner self chromium plated fancy type cast copper alloy with Cat Part No ACN-CHR-1173 of Make : JAQUAR, or equivalent out of makes specified in list of makes complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed.

S & F in repairs 4 mm thick designer Fibre cement board ( E-board) Tile of size 595x595 mm of approved texture, blossom, fixture and primer finished complete , complete all as specified and as directed. Note : Weight not less than 4.84 Kg /m2.

S&F Vitreous China Urinal of size 375x390x590mm flat back large including partation with CP waste coupling, waste pipe and CP spreader with CP connection pipe complete all as specified and as directed.

S&F Aluminium anodized powder coated Window/Ventilator Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for preparing Newly Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, complete all as specified and as directed.

S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, any type as per site requirement complete all as specified and as directed.

Spreading and levelling in well layers not exc 25 cm thick including watering as required etc complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars Salt glazed stoneware drain pipes 150mm size laid in trenches and jointed complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes 150mm bore size after they are laid and tested complete all as specified and as directed.

M&L for cement concrete 1:2:4 Type B2 using 40mm graded stone aggregate as in foundations of manholes etc complete all as specified and as directed.

M&L for Pre cast cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate set in cement mortar 1:4 as in Manhole covers , shelves and similar items complete all as specified and as directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mitred/ stopped ends etc complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base complete all as specified and as directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Excavation in post holes (or similar holes) in hard /dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

M&L for PCC (1:2:4), type B-2 (using 40 mm graded crushed stone aggregate), 100mm thick as in flooring finished even & smooth without using extra cement as all specified ) complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete , lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs , not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in ridge/ roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:5:10) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and as directed.

M & L for 100mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in sub base & mass concrete finish even and rough to receive further treatment complete all as specified and directed..

M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Supply only Plastic dividing strips of 38mm wide , 1.5 mm thick and complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Note : WPC shall be measured and paid seperately

M&L for providing RCC precast cement concrete (Type B0 1:2:4 using 12.5mm aggregate) and set in CM 1:4 louvres and jallies, 25mm thick (measured solid), with all mouldings / frame incl Reinforcement with 4.0mm dia mild steel bars/wire and setting inceent mortor 1:4 complete all as spd and as directed. Note : Cost of mild steel bar/wire as reinforcement will deem to be inculded in quoated unit rates.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc all as specified as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits,bends, tees/battens etc complete all as specified and as directed.

Taking down unserviceable MCB, MCCB DB's/AC's box with MCB/MCCB to deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any size/rating complete all as specified and as directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including concealed PVC conduit size of not less than 20mm concecled in wall including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and making good, disturb surface as it is, all as specified and as directed for the following:-

One light point controlled by one,one way switch.

One ceiling fan/exhaust fan/Air ciculator /bell point controlled by one way switch.

Socket 3 pin 5 Amps on the same board, complete all as specified.

Socket 3 pin 5 Amps on independent board , complete all as specified and directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 4 sqmm drawn through in and including concealed PVC conduit size of not less than 20mm concecled in wall including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 4 sqmm and making good, disturb surface as it is, all as specified and as directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including concealed PVC conduit size of not less than 20mm concecled in wall including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and making good, disturb surface as it is, all as specified and as directed.

S&F for switch piano flush type single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and as directed.

S&F for switch socket outlet 5 Amps, 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and as directed.

S&F for switch socket out let, 6 pin 5/15 Amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and as directed.

M&L for ceiling rose 3phase/PVC polycarbonate isolated body complete all as specified and directed

S&F For ceiling fan regulator stepped electronic type 300 watt rating, 230 volts with polycarbonate body complete all as specified and as directed.

S&F sheet metal enclosure single pole and neutral two pin and earth plug and socket complete with one MCB SP 20 Amps for geyser complete all as specified and as directed.

Supply and fix in replacement Exhaust fan 300 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply ( Old fans will be deposited to MES authorities) complete all as specified and as directed.

Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F Lamp holder insulated body with back plate for batten fittings.with polycarbonate body complete all as specified and as directed.

S&F in replaceent of MCB DB sheet enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 with enclosure blank plates for unused way suitable for 12 way complete all as specified and as directed.

S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA, B series complete all as specified and as directed.

S&F MCCB, three pole, 415 Volts, 100 Amps,16KA, C series complete all as specified and as directed.

S & F in replacement of LED building light luminaire 35 watt, pressure dia cast aluminium housing with heat resistance toughened glass & IP-66 protection complete all as specified and as directed.

S & F in replacement street light bracket made of 40mm bore GI light grade pipe 1.5mtr long bend to shape including necessary fixing arrangement with clamp of suitable size made of 35x4mm MS flat iron suitable shape to pole including nut, bolts 3 Nos with washers complete all as specified and as directed.

M&L in replacement for sub main wiring with two single core 6sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 4 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and as directed.

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 25 Sqmm nominal cross section x 4 core complete all as specified and as directed.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and as directed by Engineer-in-Charge. (Punned thickness shall be paid).

M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and as directed by Engineer-in-Charge.

ASHISH AND CO

M/S GEETANJALI ENTERPRISES

P R Constructions

Chaudhary Constructions

Shakashi Construction Co.

FAIR ENGINEERS & CONTRACTORS

M/s GANJOO AND CO