REPAIRS TO JOINERY AND SANITARY FITTINGS IN CERTAIN BLDGS AND REPAIRS TO ROAD/PATH, DRAINS ETC AT INS AGRANI COIMBATORE

Amount

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any,weight not exeeding 4 kg per sqm.

Taking down Chowkhats or frames with shutters not exc. 1.5 sq. m each, (without taking off shutter from the frame) removing to or from store

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutter from the frame)

Taking down shutters of any description exc 1 sqm not exc 2 sqm

Ditto but exc 2 sqm each

M&L Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight per sqm not exe 4Kg

M&L IInd Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L 2nd Class Hardwood Glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. but divided into square with plane chamfered or rounded, mitred and rebated squash bars any numbers ,edges of framing plain,beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L 2nd Class hard wood Plain, framed, panelled shutters 35mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

M&L 75 mm long Aluminium anodised, barrel tower bolts of extruded ection and fixed

ditto as above item no. 46 but 150 mm long

M&L 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

Ditto but 100mm ditto

S&F 75mm long Aluminium handles, cast type, anodised

ditto 150mm lomg ditto

S&F Aluminium Hat pegs, solid body,125mm to 175 mm,fixed in repair

S&F 100mm Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, fixed in repair

S&F Aluminium Tubular towel rail, 20mm dia, D type, 60cm long between flanges,fixed in repair

S&F cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and repair

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

Ditto in repair

Ditto but including hacking out old brocken glass of any description

S&F In repair double action spring hinges mild steel with steel wire spring stove enamelled, 150mm

S&F in repair Mortice lock, vertical type, size 100 mm mild steel 4 levers

M&L preparation of new painted wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer

S&F MS holdfast made out of flat iron 25X3mm size

M&L PCC type B0 1:2:4,12.5mm graded aggregate as in filling around holdfast

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair Vitreous China wash basin, white, flat back, size 550X400mm including brackets

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repair EWC (pedestal pattern) white water closet.(excluding flushing cistern and flush pipe)

S&F in repair PVC valveless 10 liters, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L 20m thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness below or above ground level.

M/L, 40 mm thick cement concrete type B-1, :2:4 (20mm graded aggregate), finishing even and smooth without using extra cement.

CAK Enterprises

SEMBA ELECTRICALS