PERIODICAL SERVICES TO MD AND OTM ACCN AND CONNECTED WORK AT 7 AFH KANPUR CANTT

Amount

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder (machenical means) or by manual means as directed, washing, rubbing down including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for preparation of decorated surfaces of walls (plastered) by brooming down with coir wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Labour for cleaning only of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots, painting/ distemper drops etc from existing surface of doors, windows, ACP sheets, stone /granite/ tiles/marble surfaces through required cleaning arrangement without damaging existing surface complete all as directed by Engr-in-charge. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L applying one coat of white wall care putty (1 mm thick) (after complete removal of old finish/newly plastered surface) .complete all as specified and directed. 1) cost of complete removal will be paid in item no.1. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for applying two coat of exterior weather proof paint on already prepared surface of wall complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for applying one coat of exterior weather proof paint on already prepared surface of wall complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old wall surfaces and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation old surfaces of wall applying Two coats of Plastic emulsion paint of any description over 10cm width or girth, not otherwise described complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying one coat of oil bound distemper on old treated surface of ceiling etc complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying one coat of oil bound distemper on old treated surface of wall etc complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying two coat of oil bound distemper on prepared surface of wall etc complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for prepration of old surface of wall and applying one coat of white wash complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in CM 1:4 on fair face of brick wall mixed with water proofing compound complete all as specified and directed. Note :-water proofing compound to be measured and paid separately. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in CM 1:6 complete all as specified and directed. Note :-water proofing compound to be measured and paid separately. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Supply only Liquid water proofing compound complete all as spfd & directed.

Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) complete all as specified as directed. Notes - Rate included for necessary scaffolding and arrangments for working upto 20m height).

M&L Writing Letters or Figures (Block, Roman, Italic or Indian), etc. Height not exc. 150mm, complete all as specified and as directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Dismantling of Plain or corrugated AC/steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed..

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified

Dismantling of framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With semi perforated false ceiling tiles of Size 595 x 595 mm of approved texture, 12mm thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threadedhanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

M&L for removing/cleaning of existing painted surfaces of ACP board in wall, column, beam etc with help of hand held/long hand sander and preparing the surface smooth and applying one coat,100% Acrylic paint on ACP board complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L two coat of damp proof paint any tint on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

Providing and fixing factory made uPVC white colour sliding windows, area n exc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45.5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse).

S&F plain glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 1 sqm & n. exe 2 sqm each and refixing in same opening, all as specified and as directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele

S&F in repair door bottom seal with alluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

Supply and fixing in repairs 4.8 mm thick sheet glass, exc 0.50 Sqm in each pane, fixed to aluminium frame work with necessary glazing cips/rubber packeng/gasket screws etc complete all as specifed and as directed.

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

M&L for two coat of luxury Emulsion with silver Ion Technology recommended by Indian health Association, Whick kill 99% of infection causing bacteria on painted surface and inproves indoor air quality by reducing formaldehyde, a harm pollutants. including preparation of surfaces (Note : Painting will be done through authorised applicators only complete all as specified and directed. (Note:-Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for texure paint with base coat (as per manufacturer instruction) of approved tint & approved pattern on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as spfd & directed by Engr-in-charge. (Note:-Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for cartoon painting/design painting with base coat (as per manufacturer instruction) of approved tint & approved pattern on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy spots ets and preparation of plastered sufraces finally rubbed and smooth with sand paper complete all as spfd & directed by Engr-in-charge. (Note:- Rate included for necessary scaffolding and arrangements for working upto 20m height)

M&L for preparation old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), all as directed.

Taking down chowkats or frames exc 1.5 sqm but n.exec 4 sqm each complete all as spfd

Taking down shutters of any description but exc 1 sqm but n.exec 2 sqm each all as directed.

S & F Flush shutters,30 mm thick solid core construction, with block board board core & ply wood pannels commercial type on both sides all as specified and directed.

S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & as directed by Engr -in -charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

Taking down easing and adjusting wooden shutters of any description n.exec 1 sqm each refixing in same opening, all as specified and as directed.

Taking down easing and adjusting wooden shutters of any description exc 1 sqm and n.exc 2 sqm each refixing in same opening.

S&F in repairs MS galvanized wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F Butt Hinges medium weight stainless steel 100mm long complete all as specified.

S&F stainless steel sliding door bolts of 250 mm long with hasp and staple(bolt type) and fixing clips of sheets , complete all as specified and directed.

S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors , plateform and similar work including cutting to shape, drilling holes & required accessories for fixing complete all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with silicon sealant in square n. exec 0.5 Sqm in each pane complete all as directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F plain glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified.

M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 2 sqm each and refixing in same opening, all as specified and as directed.

S&F in repairs butt hinges medium weight stainless steel 100 mm long, complete all as specified and directed.

S&F in repairs Butt hinge medium weight stainless steel steel 75 mm long, complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 100 mm long, complete all as directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F in repair Aluminum anodized sliding door bolts of 250mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair Aluminum anodized sliding door bolts of 200 mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair mortice lock brass 4 levers vertical type, size 100mm complete all as specified and directed.

S&F in repair 100 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

S & F in repair 100 mm long stainless steel double action, heavy duty, self closing hinge for doors fixed with SS screw complete all as specified and directed.

Note:- (1)-Cost included in quoted rates for all taking down/refixing including internal electrification as per site requirement. (2) all painting/distempering/ preparation/removal/white wash etc works will be after proper covering of doors/windows/ventilators/ glasses/all type bath fittings & electric fittings etc.also cleaning of splashes will be done by contractor . (3) measurement will be done after complete removal of debris. (4) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same

M.M.V. CONSTRUCTIONS (BID ID -3466697)

JOG CONSTRUCTION (BID ID -3466360)

Khalil Ahmed and Sons (BID ID -3466901)

keerti trading corporation (BID ID -3465210)