02(W)/EDCH/2022-23

Amount

FOR CONNECTING 11KV BHATIYANA FEEDER TO 33/11KV SUB-STATION-FAGOTA, BUSINESS PLAN-2022-23 (SUMMER PLAN 2022-23) IN THE AREA OF EDD-II HAPUR, UNDER EDC., HAPUR. (All work will be done as per sanctioned estimate.)

Carriage of line material (like conductor, chancel stay, earth rod etc.) from JE Store/Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of PCC Pole 8.5mtrs long support from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of ST Pole 13mtrs long support from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Erection & Fixing of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Erection & Fixing of ST. Pole 13 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Grouting of following STP/PCC Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow .

Fabrication & Fixing of T-Channel on pole by providing Holding Clamps, F-Clamps & Proper size nuts & bolts, as per RESPO/Norms.

Dismantling & removal of existing ACSR Conductor and opening of all accessories and bundling the same at various places.

Laying Stringging & Final Saggging of ACSR Weasel Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms.

Laying Stringging & Final Saggging of ACSR Rabbit Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms.

Carriage of old & used Conductor, from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road.,

Jumpering work properly as per RESPO/Norms.

AAYANSH ELECTRICAL SOLUTIONS

D S CONTRACTOR