Construction of Microbiological Lab at Dharmapuri DCMPU limited, Dharmapuri

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., complete complying with standard specifications.

Dismantling the existing Old damaged building and Clearing away the Dismantling materials from the site and to outside campus as directed by the federation engineer

Supplying and filling in foundation and basement and trenches with M. FILLING SAND in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., complete as directed by the departmental officers.

PLAIN CEMENT CONCRETE 1:5:10 (One cement, five sand and ten aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification and as directed by the departmental officers

Supplying and filling of Gravel in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., complete as per Standard Specification and as directed by the departmental officers.

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

a) Column Surface - Upto Basement

b) Column Surface - From 0.00m to 3.30m

c) Column Surface - From 3.30 m to 4.30 m

d) Plain Surface - Upto Basement

e) Plain Surface - From 0.00 m to 3.30 m

REINFORCED CEMENT CONCRETE 1:11/2:3 (One cement One and half sand and four aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., complete complying with standard specification and as directed by the departmental officers.

a) Upto Basement

b) Above Basement upto 4.5 m Height

Supplying fabricating and placing in position of reinforcement grill for all RCC works including cost of steel rod and binding wire, labour for bending, cutting and tying etc., complete as directed by dept. officers in all floors.

Brick work in cement mortar 1:5 (One cement and five sand) using best quality II class chamber burnt bricks of size 23x11x7cm (9" x 43/8" x 23/4" ) including curing etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost .).- 230 mm thk

a) Upto Basement

b) From Basement to 4.30 height

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

FLOORING with scratch proof premium grade VITRIFIED TILES of approved quality and colour OF SIZE 0.60 x 0.60 x 0.008m in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc., complete complying with standard specification.

Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.

PLASTERING with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors complying with standard specifications.

PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications.

PAINTING the wall surfaces with TWO COAT of Weather shield max exterior paint of the approved colour as per the Specification including ONE COAT OF PRIMER to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges. (The paint to be used should be got approved by the Departmental officer before us on work)

Painting the wall surface using best quality of PLASTIC Emulsion paint TWO COAT with ONE COAT OF PRIMER as per the Specification of the approved colour to give an even shade, including cost of brushes and all other materials required and the scaffolding charges. ( The paint to be used should be got approved by the Departmental officer before us on work.)

Indian Patent Stone Flooring (I.P.S) in cement concrete 1:2:4 using 10 to 12mm chips for 40mm thick and finished with CM 1:1, 10mm thick nearly etc. complete as per standard specification and as directed by the departmental officers.

Manufacturing, Supplying and fixing in position STEEL GRILLS. Square bars 12mm is welded to the inner face not exceeding 10cm spacing, All the members of the Grils shall be painted one coat with red oxide primer. The rate shall be inclusive of cost of all materials, labour charges including cost of welding electrodes, transportation to site of work loading, unloading and all other charges etc., complying with s.s.and as directed by the departmental officers.

Supplying and fixing in position of aluminium anodized partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical members are spaced at 90cm c/c and to horizontal members are spaced at 1.20m, 2.10m and 2.40m height and the bottom panels should be covered with 9mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass with necessary glassing clips, rubber beadings etc., including necessary dismantling holes in the RCC columns, beams masonry wherever necessary with power drill to the extent required and make good the dismantled portion to original condition after fixing as directed by the departmental officers. All the aluminium sections should be anodized to 1.5 microns as per ISI specifications 1868/1962 - Inculding - 7 Doors of Size - 1.00 m x 2.10 m

Supplying, fabricating and placing in position of three track ALUMINIUM SLIDING WINDOW natural colour mat finish. All the two shutters with sliding arrangements, the bottom shutter should have gutter arrangement so as to drain the water entering and made with extruded aluminium section for outer frames with necessary accessories such as rubber beading, aluminium clips, handle, rollers and fixing with 5.5mm thick glass pans including all materials, labour ,power consumption charges required for fabrication, including dismantling and making good the dismantled portion etc., complete as directed by the departmental officers.( The aluminium section must be anodised with matt finish under electrically controlled condition in accordance with IS specifications 1868 / 1962 of anodic fill thickness of not less than 15 microns for all sections)

ABS DOOR : Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Federation Engineer before use on work

Fabricating, supplying and fixing in position of modular wall table with GI powder coated cupboards of approved quality and colour at required shape & size of 0.75m height and cupboard width of 0.90m from the wall with finely polished 20mm thick granite on the top of the cupboard with rounded edges. Also providing electrical arrangements of 6 module plate with 5A/15A - 2 sockets & switches and fixing of PP sink with 3 way water tap, Rate including loading, unloading, transporting etc., complete as directed by the departmental officers and as per standard specifications

Media Preparation Room - L shaped wall table of size 3600mm+3000mm x 900mm width x 900mm height

Sterilisation Room - wall table of size 3000mm length x 900mm width x 900mm height

Inculation Room - wall table of size 3000mm length x 900mm width x 900mm height

Decontamination Room - L-shaped wall table of size (3000mm + 3600mm) length x 900mm width x 900mm height

Fabricating, Supplying and fixing of GI Powder Coated Storage Cupboard of length 6' x 1.5' width x 6' height with doors locking arrangements. Rate including loading, unloading, transporting etc., complete as directed by the departmental officers and as per standard specifications

Supplying laying and jointing of UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of various diameter including cutting, threading and fixing UPVC specials but excluding cost of such specials and fixing to wall with necessary teakwood plugs, pvc clamps and screws, making good the dismantled portins to original conditin with necessary brickwork and plastering wherever necessary with necessary scaffolding charges. etc., Complete as per Standard Specification and as directed by the departmental officers.- Internal Water Supply

25 mm dia Pipe - Above Ground level (Inculding all specials)

20 mm dia Pipe - Above Ground level (Inculding all specials)

External Water Supply - 25 mm dia Pipe - Above Ground level - Inculding all specials

Supplying laying and jointing various diameter PVC pipes of approved quality (FINOLEX) and best variety conforming to I.S.S and with I.S.I. Mark including cutting threading and fixing PVC specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to orginal condition including cost of special clamp with screws nails teak wood plugs and any other accessories necessary for fixing in position etc., complete as per standard specifications and as directed by the departmental officers - 4" Dia PVC Pipe (6Kg/cm2) for sanitary arrangements

Supplying laying and jointing various diameter PVC pipes of approved quality (FINOLEX) and best variety conforming to I.S.S and with I.S.I. Mark including cutting threading and fixing PVC specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to orginal condition including cost of special clamp with screws nails teak wood plugs and any other accessories necessary for fixing in position etc., complete as per standard specifications and as directed by the departmental officers - For Rainwater Disposal

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Moulded Chamber Burnt Bricks of size 9" x 4½" x 3"with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. CLEAR SIZE 0.60 X 0.60

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying, fixing in position of 1000 lts PVC water Tank over the roof top of the proposed building, Rate including all labour and lead etc. complete as directed by the departmental officers as per standard specification.

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB, 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5AFT switch with 3mm thick hylem sheet cover MS switch box with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion for concealed light point/fan point (for electronic regulator)

Supply and fixing of 3Nos. 5A (3pin and 2pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 20A Flush type Wall Socket 32ADP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply & run of 2 of 2.5 sq mm (36 / 0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade in suitable PVC rigid pipe on conceled & ceiling with continuous earth wire connection of 1.5sqmm (22/0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade and making good

Supply and run of 2 of 4 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection 2.5sqmm (22/0.3) PVC insulated SC unsheathed cu. conductor of 1100V grade and making good of the concealed portion with suitable colour

Supplying and fixing of single box square Type LED On false celing with suitable recessed fittings keen suspension fromt

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)