REPAIR MAINT OF JOINERY AND CERTAIN OTHER WORKS AT OTM AND MD ACCN IN NORTHERN SIDE AT MIL STN GAYA

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each completed all as specifed and directed.

Taking down chowket or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each completed all as specifed and directed.

Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqm each completed all as specifed and directed.

S & F for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) completed all as specifed and directed.

S & F for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top completed all as specifed and directed.

M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work completed all as specifed and directed.

S&F Magnet catch completed all as specifed and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube completed all as specifed and directed..

S&F of Aluminium powder coated(1/1.2 mtr size) door cills of Any size and descripton all as specified and directed

S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame completed all as specifed and directed.

S&F 100 mm size Stainless steel butt hinges type B-12 completed all as specifed and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

S&F 150mm long aluminium anodised handle cast type and fixed D Type

S&F 125mm long aluminium anodised handle cast type anodised allcompleted all as specifed and directed.

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long completed all as specifed and directed.

S&F 75 mm long Stainless steel butt hinges with steel hinge pin etc.

S&F in repair Mortice lock, vertical type, size 100 mm 2 levers aluminium type completed all as specifed and directed.

S&F in repair Aluminium locking bolts,anodised, with bolt not less than 10mm dia, 100 mm size completed all as specifed and directed.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long completed all as specifed and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) completed all as specifed and directed.

S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) completed all as specifed and directed.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 (Gde-E-165) completed all as specifed and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto two storey of bldgs) completed all as specifed and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto two storey of bldgs) completed all as specifed and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads completed all as specifed and directed.

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces completed all as specifed and directed.

M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces completed all as specifed and directed.

S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.completed all as specifed and directed.

Supply only rubber beading for repairing of existing door shutter

M&L for 1 mm thick Birla white putty/JK white wall care putty on walls/Ceiling surfaces.

M&L for Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed.

S&F sheet glass 5mm thick pin headd/froasted and glazing with clips in squaire . exc 0.50 sq m in each pane

S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165) completed all as specifed and directed.

M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc.completed all as specifed and directed.

M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., completed all as specifed and directed.

M&L for providing PCC (1:3:6), type C-1 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.completed all as specifed and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc completed all as specifed and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl for 110 mm bore pipe

PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed completed all as specifed and directed..

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. completed all as specifed and directed.

S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. completed all as specifed and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe including fittings such as bend,tee,l bow etc completed all as specifed and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe including fittings such as bend,tee,l bow etc complete all as specified and directed

Taking down of existing GI Tubing 15 mm dia complete all as specified and directed.

Taking down of existing GI Tubing 20 mm dia complete all as specified and directed.

Supplying and laying as in repair of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed.

Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed.

S & F of CPVC pipes MBTA/FBTA fittings such as tee, elbow, socket and Tank union etc of 16 mm outer dia complete all as specified and directed

S & F as in repair of CPVC pipes MBTA/FBTA fittings such as tee, elbow and socket etc of 20mm outer dia complete all as specified and directed.

S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long .completed all as specifed and directed.

S&F in repair 15 mm dia two way angle valves cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions completed all as specifed and directed.

S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions completed all as specifed and directed.

S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms completed all as specifed and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed.

S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe completed all as specifed and directed.

S & F as in repair 5/10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets completed all as specifed and directed.

S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position completed all as specifed and directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges completed all as specifed and directed.

S&Ftubular towel ring 165mm external dia completed all as specifed and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) completed all as specifed and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

S & F Century PVC boards Starke prime thickness 7to 8 mm with decoravtive century starline laminates gloss colour wenge brew 80675 G on front of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling and dismantling of existing wall panelling all as specified and directed

S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

M & L for preparation of newly plastered surfaces of walls and applying two coat of distempering over a coat of primer completed all as specifed and directed.