Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹32.9 L+₹4.9 L (17.7%)Rejected-AOC N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 3 | L3₹36.5 L+₹8.6 L (30.7%)Rejected-AOC DOOR NO 2 561 BEHIND HOINA HOSTEL MOOGAMBIKA NAGAR PERIYAPALAYAM ROAD THIRUNINRAVUR CHENNAI 602 024 | CHENNAI | THIRUVALLUR | TAMIL NADU | 602024 | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 4 | L4₹37.1 L+₹9.1 L (32.8%)Rejected-AOC 03 PATEL STREET GANDHI NAGAR AVADI TIRUVALLUR TAMIL NADU 600054 | THIRUVALLUR | TAMIL NADU | 600054 | L4 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 5 | L5₹37.5 L+₹9.6 L (34.5%)Rejected-AOC | L5 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
| Sl No | Description | Qty | Unit | M/s KM Marimuthu Achary L2 | Green Ray Technologies L5 | M/s.Sai Agency L1 | M RAMANAIAH L3 | BALA BUILDERS L6 | SIVA ENTERPRISES L4 | RD ENTERPRISES L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for preparing of old flexible /rigid surfaces by Wire brush and remove dust particles,etc by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete, after that applying one coat of aqua water based painting of any tint approved conforming to IS: 164-1981 as in lettering, dashes, arrows for preparation of old painted/new rigid surface applying complete all as specified and as directed by Engr-in-Charge
Note : one coat of aqua water based road marking/runways paint shall be applied as per manufacturers instructions along AAI specifications and specially by using mechanical sprayer complete all as specified and as directed by Engineer-in- charge. | 8,855 | Sqm | 50 ₹4,42,750 | 49 ₹4,33,895 Lowest | 60 ₹5,31,300 | 56 ₹4,95,880 | 50 ₹4,42,750 | 60 ₹5,31,300 | 65 ₹5,75,575 |
| 2.00 | All as per item No 01 here-in-before but on old painted/new flexible/bituminous surfaces. | 31,119.72 | Sqm | 45 ₹14,00,387.4 Lowest | 50 ₹15,55,986 | 50 ₹15,55,986 | 57 ₹17,73,824.04 | 49 ₹15,24,866.28 | 58 ₹18,04,943.76 | 55 ₹17,11,584.6 |
| 3.00 | Material and labour for one coat of retro reflective painting to runway, taxi way, centre line, apron markings etc. either continuous or broken lines to the required width and length over the existing painting surface/new surface on bituminous surface with water based road marking paint (Retro reflective paint) Brand : Berger or equivalent brand conforms to AAI specification 2/2006 including supply of paint material at the rate of 2.5 to 3.0 sqm per litre and glass beads at the rate of 0.25 Kg per Sqm (Reflective index 1.5),dry film thickness 180-240micron with self propelled airless spray painting equipment including , remove dust particles by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete,preparation of surface upto the requirements at site complete all as specified and as directed by Engineer-in-Charge.
Note : Retro reflective paint shall be applied as per manufacturers instructions along with AAI specifications. | 5,749 | Sqm | 225 ₹12,93,525 | 260 ₹14,94,740 | 110 ₹6,32,390 Lowest | 209.2 ₹12,02,690.8 | 280 ₹16,09,720 | 207 ₹11,90,043 | 261 ₹15,00,489 |
| 4.00 | M & L Racking out of old existing sealant compound, back up rod and filler board of the existing expansion joints by specia tools like racker/cutting blades/machines , widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant Thereafter filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified , over it filled with closed cell medium density, cross linked polyethylene foam backup rod of 30 mm dia for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of+/- 30% complete all as specified and directed by Engineer-in-Charge. | 60 | XRM | 2,500 ₹1,50,000 | 4,500 ₹2,70,000 | 1,200 ₹72,000 Lowest | 2,950 ₹1,77,000 | 3,650 ₹2,19,000 | 3,000 ₹1,80,000 | 3,352 ₹2,01,120 |
| 5.00Note for Serial item No. 1 to 4: Kind attention of tenders is invited to that runway will be available to execute the work on Saturday and Sunday or on holiday or as required by the user. The tenderer has to work as per user's requirement and unit rate quoted by the tenderer shall be deemed to include for this provision/condition. | ||||||||||
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
15 Sept 2025, 6:00 pmClosed
Garrison Engineer M NAS Arakkonam
Garrison Engineer M NAS Arakkonam 631006
PAINTING OF RUNWAY PTT AND DISPERSALS WITH WATER BASE PAINT AND RETRO REFLECTING PAINT AT AIRFIELD INS RAJALI ARAKKONAM
2025_MES_727398_1
8506E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer M NAS Arakkonam
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer M NAS Arakkonam
₹76,000
Yes
15 Oct 2025
25 Aug 2025
17 Sept 2025
25 Aug 2025
15 Sept 2025
8 Sept 2025
Amount
Material and labour for preparing of old flexible /rigid surfaces by Wire brush and remove dust particles,etc by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete, after that applying one coat of aqua water based painting of any tint approved conforming to IS: 164-1981 as in lettering, dashes, arrows for preparation of old painted/new rigid surface applying complete all as specified and as directed by Engr-in-Charge Note : one coat of aqua water based road marking/runways paint shall be applied as per manufacturers instructions along AAI specifications and specially by using mechanical sprayer complete all as specified and as directed by Engineer-in- charge.
All as per item No 01 here-in-before but on old painted/new flexible/bituminous surfaces.
Material and labour for one coat of retro reflective painting to runway, taxi way, centre line, apron markings etc. either continuous or broken lines to the required width and length over the existing painting surface/new surface on bituminous surface with water based road marking paint (Retro reflective paint) Brand : Berger or equivalent brand conforms to AAI specification 2/2006 including supply of paint material at the rate of 2.5 to 3.0 sqm per litre and glass beads at the rate of 0.25 Kg per Sqm (Reflective index 1.5),dry film thickness 180-240micron with self propelled airless spray painting equipment including , remove dust particles by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete,preparation of surface upto the requirements at site complete all as specified and as directed by Engineer-in-Charge. Note : Retro reflective paint shall be applied as per manufacturers instructions along with AAI specifications.
M & L Racking out of old existing sealant compound, back up rod and filler board of the existing expansion joints by specia tools like racker/cutting blades/machines , widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant Thereafter filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified , over it filled with closed cell medium density, cross linked polyethylene foam backup rod of 30 mm dia for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of+/- 30% complete all as specified and directed by Engineer-in-Charge.
Note for Serial item No. 1 to 4: Kind attention of tenders is invited to that runway will be available to execute the work on Saturday and Sunday or on holiday or as required by the user. The tenderer has to work as per user's requirement and unit rate quoted by the tenderer shall be deemed to include for this provision/condition.
M/s KM Marimuthu Achary (BID ID -3420936)
M RAMANAIAH (BID ID -3425325)
SIVA ENTERPRISES (BID ID -3423946)
Green Ray Technologies (BID ID -3425342)
BALA BUILDERS (BID ID -3425295)
RD ENTERPRISES (BID ID -3425037)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .