Provn of 03 x Storage shed for furniture of BSO (South) near bldg No.P-73 under AGE B/R-I (S) AND AGE E/M (S) of GE (South) Delhi Cantt-10

Amount

Excavating in trenches n.exc 1.50 m wide and n. exc 1.50 m in depth for foundation etc and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L M-25 Design Mix (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M&L formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed by Engr-in-Charge.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per item No.6 above but 8 to 10 mm in stirrups, spacers and binders

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long 5 to 10mm dia complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel in plates, channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conf to Fe 410-W (Gde E-250) quality 'A' complete all as specified and directed by Engr-in-Charge.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., conforming to Fe-410W-(Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge.

S&F mild steel bolts (Anchor bolts),purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long & 16 mm dia complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B' complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridge roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in floor complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete 1:2:4 type B-2 (using 20 mm graded stone aggregate) in floor complete all as specified and directed by Engr-in-Charge.

M&L brick work using sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering with redimix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs complete all as specified and directed by Engr-in-Charge. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. Note :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm using hard/ dense soil complete all as specified and directed by Engr-in-Charge.

Removing of excavated material exc 1.50 km but n.exc 5 km outside MD land complete all as specified and directed by Engr-in-Charge.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLSH 1100 volts grade electrical cable in and including concealed PVC conduit medium grade and sunk in pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer complete with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and directed by Engr-in-Charge. One light /fan/Bell point/security light controlled by one way switch

All as per item No 26 above but One 3 pin socket outlet 5 amps point independent board

All as Item No 26 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

S&F switch piano flush type 5/6 Amp complete one way single pole complete all as specified and directed by Engr-in-Charge.

S&F socket outlet 5 pin 5/6 Amp two in one complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15 Amp complete all as specified and directed by Engr-in-Charge.

S&F socket outlet 2 in 1, 5 pin 15/5 Amp complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and directed by Engr-in-Charge.

S&F of LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED complete all as specified and directed by Engr-in-Charge.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including fabrication of GI bracket 40mm dia suitable for fixing of Led light fitting duly fixed with clamps, nut, bolts, & washers etc and all as directed complete all as specified and directed by Engr-in-Charge.

S&F of metal body exhaust fan 450 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size including making provision of requisite hole/opening during construction of work for exhaust fan complete all as specified and directed by Engr-in-Charge.

S&F MCB DB SPN 12 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 200 Amps rated bus bar complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 'C' curve 40 Amps 240 Volts , 10 KA complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 25 sqmm, 2 core complete all as specified and directed by Engr-in-Charge.

M&L for excavation of trench not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for poles, stay assembly and laying cable etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Supply and laying old size brick coveringcommon burnt clay building bricks sub class 'B' designation 75 of size 230x115x75mm complete all as specified and directed by Engr-in-Charge.

Supplying and laying including taking out G.I. tubing light grade for encasing LT cables for mechanical protection, laid under plinth/ floors/ roads/ paths/ culverts or fixed on walls or concealed in walls or along the steel poles incl bends/clamps and all accessories size of 40 mm bore complete all as specified and directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and directed by Engr-in-Charge.

M/S.M.S.Devi.Const.Co

SARTHEE CONSTRUCTION CO.

P R Constructions

Chaudhary Constructions

Vipul Construction