ADDITION AND ALTERATION OF OLD SPARK RANGE BUILDING IN ZONE-I AT TBRL RANGE RAMGARH UNDER GE (I) RnD CHANDIGARH

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge complete all as specified and directed.

M&L for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in CM 1:6 complete all as specified and directed.

Dismantling tile/stone slab work in floors and roofs laid in cement mortar any type including stacking material within 50 metres lead, thickness of tiles 10 mm to 25 mm complete all as specified and directed.

Providing and laying Vitrified tiles Double charge vitrified tile polished finish of size 600x1200 mm in floor in different sizes (thickness 8 mm to 10 mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Providing and laying Vitrified tiles in different sizes (thickness 6 mm to 8 mm), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 1000x1000 mm complete all as specified and directed.

Providing and fixing Ist quality ceramic glazed wall tiles size (450MM x 300MM) conforming to IS: 15622 (thickness 8 mm to 10 mm), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for steps thread , raiser window sills, facias, ramp, counter top for WHB and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, grove for ramp and polishing to edges to give high gloss finish etc. all levels.Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm complete all as specified and directed.

Providing and fixing 20-25mm thick pree polished kota stone slab flooring over 20 mm (average) thick screed base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) etc. complete all as specified and directed.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface with water including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

Providing and laying for 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) on ceiling complete all as specified and directed.

Distempering on Ceiling with oil bound washable distemper of approved brand and manufacture to give an even shade : New work/Old (two or more coats) over and including water thinnable priming coat with cement primer complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces fair and even (without using extra cement) complete all as specified and directed.

M&L applying two coats of oil bound distemper for new surface over one coat primer and coat of putty with machanically and using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose lenth of 30 mtr the spray machine should be reputed manufacture with pro guard rechnoly and capability of tracking pressure and paint for applying distemper should be able to spay in hard to reach areas and penetration of distemper on the surface complete all as specified and directedNote :- sandling of surface to be done by machnical sander with 1500-2700 rpm with internal dust extraction system for clean enviroment certified by paint manufacturer complete all as specified and directed.

M&L for complete removing existing treatment with machanically and applying two coats of oil bound distemper over one coat primer and coat of putty using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose lenth of 30 mtr the spray machine should be reputed manufacture with pro guard rechnoly and capability of tracking pressure and paint for applying distemper should be able to spay in hard to reach areas and penetration of distemper on the surface complete all as specified and directedNote :- sandling of surface to be done by machnical sander with 1500-2700 rpm with internal dust extraction system for clean enviroment certified by paint manufacturer complete all as specified and directed.

M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/Top layer, finished Fair and Even,surface complete all as specified and directed. NOTE : Integral Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply only Water proofing compound as specified.

Material and labour two coat water based premium acrylic smooth exterior emulsion of approved colour on new surface over one coat primer and coat of putty with machanically, silicon addive & colour stay technoogy, excellent dirt pick up resistance with lo VOC less than 50 gms /liter as per the LEEDS specification , anti algal properties in two coats @ 1.79 litre (undiluted) /10 sqm diluted with water as per manufacturer instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr minute having a pressureof 3300 PSI allow 6-8 hours to drt the surface in both the coats of paint complete all as directed.

Material and labour complete removing existing treatment with machanically two coat water based premium acrylic smooth exterior emulsion of approved colour on old surface over one coat of primer and coat of putty with machanically, silicon addive & colour stay technoogy, excellent dirt pick up resistance with lo VOC less than 50 gms /liter as per the LEEDS specification , anti algal properties in two coats @ 1.79 litre (undiluted) /10 sqm diluted with water as per manufacturer instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr minute having a pressureof 3300 PSI allow 6-8 hours to drt the surface in both the coats of paint complete all as directed. Note :- sandling of surface to be done by machnical sander with 1500-2700 rpm with internal dust extraction system for clean enviroment certified by paint manufactuerer.

Providing painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two coats on old work complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel/aluminimum or wood) shutter of area 3 sqm n.exc. including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) complete all as specified and directed.

Providing and fixing for For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) complete all as specified and directed.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) complete all as specified and directed.

S&F for 5 mm thick polycaronate multi wall sheet, both side UV coated, fixed with coach/shelf taping screws fixed and necessary silicon on MS framework as directed complete all as specified

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) complete all as specified and directed.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made 30 mm thick panel PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading Code on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification &drawing.

Providing and fixing pressed steel door frames conforming to IS:4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS :2202 (Part I) decorative type/pree laminated both faces, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands complete all as specified and directed.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking rrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and directed.

Providing and fixing bright finished brass handles 125 mm with screws etc. complete all as specified and directed.

Providing and fixing Brass tower bolt (barrel type) 250x10 mm complete all as specified and directed.

Providing and fixing ISI marked 125x65x2.12 mm oxidised SS. pressed butt hinges with necessary screws etc. complete all as specified and directed.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

S&F in repairs ventian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and as directed

Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mmthickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete all as specified and directed.

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

M&L for painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

M& L Two or more coats on Old/new wooden surface including a coat of wood filler French spirit polishing complete all as specified and directed.

S&F PVC wall Lining/panelling consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading all as per specified and directed by Engr -in -Charge.

Providing and fixing 12 mm thick prelaminated particle board with decorative laminaton both side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Demolishing of Brick tiles or terracing tiles in single layer on roofs complete as all as specified and as directed.

Demolition of Mud phuska of any thickness, including plastering and leeping complete as specified and as directed.

M&L for Ready Mix Concrete (low density thermal insulative concrete of density 1200 kg/cum) grade (M-25) obtained from plant approved with MES as in roofs, terraces, sunken and other locations as per site requirements laid through RMC with suitable arrangements of pumping etc complete all as specified and directed.

Material and labour for Cleaning (by use of wire brush, broom and high pressure jet) and preparation of roof/wall (RCC/BRICK/tiles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range 400% to 600%. (b) Tensile strengthof 8-12N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) Hardnes (Shore "A" ASTM D2240) of range 50-70.The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. A sample has to be prepared by applicator before starting of work on ground and this sample to be approved by GE.

M&L for cement concrete type B-0 , 1:2:4 (Using 12.5 mm graded aggregate) in roof kerbs, mud stops, rounded or chamfered on edges. Complete all as specified and directed by Engr-in-charge.

M&L for 0.71 mm thick Plain Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) for covering the crumple/expansion joints fixed with alluminium alloy screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 5540.55 suitable for use as squatting pan or European type water closet as per manufacturer's specifications

S&F in repair CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified of approved make complete all as specified and directed by Engr-in-charge

Providing and fixing in repair 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.complete all as specified and directed.

Providing and fixing in repair wash basin oval type fix with granite counter top incl C.I. brackets, 15 mm C.P. brass fancy type pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require counter top White Vitreous China Wash basin size 540x 360 mm complete all as specified and directed.

Providing and fixing in repair Rectangular shape 1500x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing in repair 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete all as specified and directed.

Providing and fixing in repair C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Supply & fixing in repair vitreous china bowl urinal flat back white size 465x355x265, with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar, including Urinal spreader of CP suitable for fixing with 15 mm dia pipe complete all as specified & directed by Engineer-in-charge.

S&F urinal glass 10 to 12mm thick partition wall 900x450x350mm design approved by Engr-in Charge

Providing and fixing in repair CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm

Dismantling C.I.,PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead ::75 to 80 mm dia PIPE

Dismantling C.I.,PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100/110 MM

S&F PVC (RWP) pipe 110mm bore single socket in any length with rubber ring joints, fixed to walls, complete all as specified and directed

Providing and fixing soil, waste and vent pipes Sand cast iron S&S pipe as per IS:1729 100mm dia dia PIPE complete all as specified and directed.

Providing and fixing soil, waste and vent pipes Sand cast iron S&S pipe as per IS:1729 75 mm dia dia PIPE complete all as specified and directed.

Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729 complete all as specified and directed.

Providing and fixing heel rest sanitary bend 75 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing M.S. stays and clamps for sand cast iron/ trifugally cast (spun) iron pipes of diameter 100 mm complete all as specified and directed.

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 75 mm complete all as specified and directed.

Providing & fixing S.C.I gully or nahani grating 100 mm dia complete all as specified and directed.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length

Providing and fixing C.P. brass toilet paper holder of standard size complete all as specified and directed.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink after taking down old one with drain board 510x1040 mm bowl depth 250 mmbowl depth 250 mm complete all as specified and directed.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” grooved of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ groved at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ grooved of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ grooved runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge

S&F 1000 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position and including 20 mm Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms )all as specified in SSR Part I complete all as specified.

Providing and fixing PTMT Ball cock 20 mm nominal bore, 120 mm long, weighing not less than 198 gms. of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball complete all as specified and directed.

S&F 20 mm nominal bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore complete all as specified and directed.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore complete all as specified and directed.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.20 mm dia nominal bore complete all as specified and directed.

Demolition Cement Concrete of any description and in any position complete all as specified and directed.

M&L PCC 100mm thick (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete complete all as specified and directed.

M&L for Providing and laying matt finished vitrified tile of size 400x400x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

M&L for Machine pressed precast conctete interlocking colour paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over a layer of polythene film ,fine river sand, watering and consolidating complete all as specified and directed. Note: Sand and polythene film will be measured paid for seperately under respective item supplied only.

M & L for Polythene film of 400 micron thick, white over sand cushionig complete all as specified.

Supply only Fine sand (zone IV) for screed bed min 50mm thick for paving flooring complete all as specified and directed.

M&L Cobblestone flooring grey cement colour pigment fully box type min 80mm thickness, area of each tile exceeding 0.01 sqm but n exc 0.04 sqm in floor, landscapping etc set and jointed in neat cement slurry over 25mm thick screed bed CM 1:6 complete all as specified and directed.

Excavating holes in any kind of soil more than 0.1 cum & upto 0.5 cum including getting out excavated soil , then returning the soil as required in layer not exceeding 20cm in depth , including consolidating each deposited layer by ramming watering etc disposing of surplus excavated soil as directed with in a lead of 50m and lift upto 1.5 m complete all as specified and directed.

Providing and laying cement concrete 1:3:6 in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing complete all as specified and directed.

Providing & fixing 0.56 mm, Aluminium Colour coated troughed profile with center to center pitch of 200 mm, depth of 32 mm at all heights, levels and locations colour finishAluminium alloy roofing sheets of alloy IS designation 31500, temperHx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. allinclusive of labour, scaffolding, T&P and sundries etc. complete asper directions of the Engineer-In-Charge. (Cost of truss/frame workshall be paid separately).

M&L for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete all as specified and directed.

M&L for painting steel work with deluxe multi surface paint to give an even shade two or more coat applied @ 0.9ltr/ 10 sqm over an under coat of primer applied @ 0.8 ltr/ 10 sqm of approved brand and manufacturer.

M&L for making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning and bituminius filler board for joint of surfaces complete all as specified.

Material & labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/Sqm) laid on primed surfaces by forced application complete all as specified.

M&L Aluminium Plain Strip edging 57x12x3 mm for cover to crumple joint with soft foam (thermacol) incl all necessary items to be covered crumple joint complete as directed by Engr-in-Charge.

Providing along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration complete all as specified and directed.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration complete all as specified and directed.

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

M&L for reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

S&F steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more complete all as specified and directed.

M&L for centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc complete all as specified and directed.

S&F Identification Signanges Wall Mounted for Individual Room Numbers of size 0'6" x 0'6" Design, Composition, Supply & Installation of 3 M Graphics printed on Vinyl & pasted behind 3mm Acrylic Sheet with Modular Signage’s using Aluminum extrusions frame (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat Indian standards with 5 years warranty under normal working conditions.First Class Aluminium corners used to create frame and clips to hold the front media complete all as specified and directed.

S&F Wall Mounted Auto Glow Fire Safety & Emergency Signages, Design, Composition, Supply & Installation of Digitally printed Jonson Night auto glow film on HP Latex Printer with gloss vinyl pasted on 3mm acrylic sheet with Modular Signage’s using Aluminum extrusions frame (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat Indian standards. With 5 years warranty under normal working conditions of following details & sizes: "Fire Exits" board of size 1'0" x 1'6" complete all as specified and directed.

Taking down existing old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and labour for Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS insulated copper conductor single core cable in recessed (concealed) medium class suitable size conduit as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Group C) Note: (i) The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, metal flush boxes, modular cover plate with frame, modular switches etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. (ii) Fan regulator will be measured and paid separately under relevant item.

S & F Modular switch one way 6 Amp,1 Module complete all as specified and as directed.

Supplying and fixing Modular socket, 6 amps-3 pin combined, 2 Module complete all as specified and as directed.

Supplying and fixing Modular switch , one way, 16 amps, one Module complete all as specified and as directed.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and as directed.

Supply and fixing Modular capacitive-based fan regulator 2 module suitable for BLDC fan complete all as specified and as directed.

Supply and fixing DBOXx MCB protected socket , single phase, with MCB 20 Amps 'C' curve with sheet metal enclosure 4 module recessed/concealed in wall suitable for AC and other electrical connection complete all as specified and directed.

Supplying and fixing 3 Module (100mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(For power socket and 5 A indp socket) complete all as specified and directed.

Taking down carefully by sub main wiring/service connection of any type complete all as specifed & as directed.

Supply and draw sub main wiring of two run with 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduit in concealed after cutting the chases of suitable size conduit as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked including conduit and accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. Note: (i) The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit,and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. (ii) Two runs of single core cable with one run of earth continuity conductor including PVC conduit and accessories shall be measured and paid as one unit (RM) including making good disturbed surface complete all as specified and directed. (for 5 Amp indp. socket/street light)

All as per Item No. 118 above but for 2x2.5 Sqmm+1x2.5 Sqmm earth wire,(for 15/16 Amp socket wiring)

All as per Item No. 118 above but for 2x4.0 Sqmm+1x4.0 Sqmm earth wire,(for AC socket)

All as per Item No. 118 above but for 2x6.0 Sqmm+1x6 Sqmm earth wire,(For VTPN/TPN DB to SPN DB 8/12Way)

Supply & Fix in repairs Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm two to three terminals.

Supply and fixing surface/wall mounted LED light fitting four feet long 20 watt with decorative end caps, rated voltage 220-240 volts, 50 Hz, Input voltage range 120 -265 Volt, IP 20 with system efficacy 100 lm/W, PF≥ 0.9, surge protection upto 2 kV, alumunium housing and connecting to ceiling rose with flexible conductor cable with suitable size complete all as specified and as directedall as specified and as directed.

Supply and fixing Recess mounting LED flat panel 2'x2', 36 Watt rated voltage 220-240 volts, 50 Hz, Input voltage range 120 -265 Volt, IP 20 with system efficacy 120 lm/W, PF≥ 0.9, alumunium housing and connecting to ceiling rose with flexible conductor cable with suitable size complete all as specified and as directedall as specified and as directed.

Supply and fix Surface mounted (Round) LED 15/18W downlighter with white powder coated aluminium die cast housing delivers high brightness & excillent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a separate electronic constant current driver with no UV & IR radiation, energy efficent surface mounted ready to use pack, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix street light 60 watt for Bldg security New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08.complete all as specified and directed by Engr-in-charge.

Supply and fix street light bracket upto 40mm bore GI pipe/tubing light grade suitable for fixing street light 1.5 Mtr long bend at 120 degree and fix with 2 x MS clamps made of 40x5 mm flat iron including suitable nuts, bolts and washers suitable for fixing on walls/poles etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 double door complete with 200 Amps rated bus bar, earth link and neutral link with provision for fixing incomer and outgoing MCBs as outgoing switchgears, fixed flush in wall including chases cutting in wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. Note: MCBs will be measured separately.

Supply and fixing Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 double door complete with 200 Amps rated bus bar, earth link and neutral link with provision for fixing incomer and outgoing MCBs as outgoing switchgears, fixed flush in wall including chases cutting in wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. Note: MCBs will be measured separately.

Supply and fixing sheet metal enclouser distribution board 415 volt, Vertical TPN 4 Way (MCCB+12 modules) with provision for suitable MCCB FP/TP up to 125 A as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar, earthing complete double door reccess mounting IP-43 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc all as specified as directed by Engr-in-Charge. Note:- MCCB & MCBs will be measured separately.

Supply & Fixing MCB SP 6 to 32 Amps 240 volts 10 KA ''C''Series complete all as specified and directed.

Supplyand fixingin repairs MCB SPN 40 to 63 Amps 240 volts 10 KA ''C'' Series complete all as specified and directed.

Supply & Fixing in repairs MCCB, 4-pole, adjustable breaking capacity 16 KA, 415 volts, 125 Amps including taking down unservicable one complete all as specified and as directed.

Supply and fixing Rigid non-metallic PVC conduit 25 mm dia concealed in wall exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc. Note: The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this.

Supply and fixing telephone sockets RJ 11 (4 wire) Modular type 01 Module suitable for telephone cable incl Jack, Gang box, face plate complete set all as specified and directed.

Supply and fixing LAN sockets RJ 45 Cat 6 Modular type 01 Module suitable for LAN cable incl Jack, Gang box, face plate complete set all as specified and directed.

Supply and fixing modular blanking plate, 1 module complete all as specified and directed.

Supply, installation and testing of ceiling mounted PIR occupancy senser, 230 volt ± 10% AC, 50 Hz, load 6 Amps, 360 degree detection, range 6-7 meter with LED indicator and switch off delay, IP 20 suitable for any type of electrical load complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanized iron wire of 4 mm dia earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point as directed and including cement concret pit with CI cover 10 mm thick hinged to CI frame all as shown under electrical plate No 3 SSR Pt - I 2009 including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all arround the electrode, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate of SSR part -I and testing on completion all as directed.

Supply and install Hi- wall split type Air conditioner adjustable inverter type (5 star rating ) indoor /outdoor unit complete with cordless remote control unit with batteries, operting on single phase 230 V ,50 Hz power supply and cooling function of capacity 2.0 TR, Rapid cooling 4 -way swing , 5-in-1 convertable, 100 % copper , Eco friendly refrigerent, R-32 (non ODS),ISEER ≥5 incl all accessories like 2 run of copper tubes upto 5 RM, wires between indoor and outdoor unit, drain pipe etc complete all as specified and directed. NOTE :- (i) Cost of making holes for necessary connections through the existing wall shall deemed to be included in quoted rates. (ii) Cost of PVC pipe for draining out the condensated water shall deemed to be included in quoted rates (iii) Quantity of copper tube with insulated material for the complete job shall deemed to be included in the quoted rate. (iv) Additional quantitites of refrigerant if required at site shell be charged by the contractor without any extra cost.

Supply and install Hi- wall split type Air conditioner adjustable inverter type (5 star rating ) indoor /outdoor unit complete with cordless remote control unit with batteries, operting on single phase 230 V ,50 Hz power supply and cooling function of capacity 1.5 TR, Rapid cooling 4 -way swing, 5-in-1 convertable, 100 % copper , Eco friendly refrigerent, R-32 (non ODS),ISEER ≥5 incl all accessories like 2 run of copper tubes upto 5 RM, wires between indoor and outdoor unit, drain pipe etc complete all as specified and directed. NOTE :- (i) Cost of making holes for necessary connections through the existing wall shall deemed to be included in quoted rates. (ii) Cost of PVC pipe for draining out the condensated water shall deemed to be included in quoted rates (iii) Quantity of copper tube with insulated material for the complete job shall deemed to be included in the quoted rate. (iv) Additional quantitites of refrigerant if required at site shell be charged by the contractor without any extra cost.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and direct

Supply and fixing wall mounted heavy duty metal stand (Set of 2) for split AC outdoor unit incl fastnesr, nut, bolts, washer etc for fixing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil complete all as specified and as directed by the Engineer in charge.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the Engineer in charge.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the Engineer in charge.

Supply,laying,jointing and testing, fixing to wall using clamps / pole/ floor or in air or passing through pipes /ducts / road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated, screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 95 sqmm complete all as specified and as directed by Engr-in-Charge.

Supply & fixing or laying HDPE (DWC) pipe of bore (inner dia) not less than 100 mm fixing on poles, walls under floors, laying on surface etc as reqd at site and as per direction of Engr-in-Charge. Note: The rates of required accessories, bend, joints, clamps, nut bolts, for fixing on wall / surface etc are deemed to be included in quoted rates .

KUKREJA ENGINEERS (BID ID -3355611)

M/S Mukesh Kumar Gupta (BID ID -3356467)