23/EDC(BLP)/2024-25

Amount

Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, Shrawasti/Bahraich to the work site/dump site (Distance up to 70 km)

PCC Poles (8.5 mtr long)

ACSR Weasel Conductor

ABC 3X50+1X35+1X16 sq.mm

11 KV cable Al. 3x300sq.mm. XLPE.

11 KV cable Al. 3x185sq.mm. XLPE.

11 KV cable jointing kit 3x300sq.mm. XLPE.(I/D)

11 KV cable jointing kit 3x300sq.mm. XLPE.(O/D)

11 KV cable jointing kit 3x300sq.mm. XLPE.(S.through)

11 KV cable jointing kit 3x185sq.mm. XLPE.(I/D)

11 KV cable jointing kit 3x185sq.mm. XLPE.(O/D)

LT cable 1x630sq.mm.

LT cable 1x400sq.mm.

Distribution BOX.

400 KVA T/F

250 KVA T/F

63 KVA T/F

25 KVA T/F

Other line materials

Erection of single PCC Poles (8.5 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site

Erection of sectional double pole sectional PCC pole (8.5 mtr long PCC Pole) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site.

Pipe Earthing :- 40' depth bore Type earthing with all material provided by the contractor(Pipe 40' lenth with 2" dia & MS Strip etc.) (100,250,400 T/F) (Body+Nutral)

Earthing of PCC poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Grouting of PCC Pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All material would be provided by the contractor.

Laying, stringing, sagging & binding of weasel conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)

Laying, Stringing & Sagging of 3X50+1X35+1X16 sq.mm ABC Cable up to proper sag.

Laying of 11 KV cable Al. 3x300sq.mm. XLPE.(UG/OH)

Laying of 11 KV cable Al. 3x185sq.mm. XLPE.(UG/OH)

Fixing of 11 KV cable jointing kit 3x300sq.mm. XLPE.(I/D)

Fixing of 11 KV cable jointing kit 3x300sq.mm. XLPE.(O/D)

Fixing of 11 KV cable jointing kit 3x300sq.mm. XLPE.(S.Through)

Fixing of 11 KV cable jointing kit 3x185sq.mm. XLPE.(I/D)

Fixing of 11 KV cable jointing kit 3x185sq.mm. XLPE.(O/D)

Fixing of LT Cable 1x630sq.mm.

Fixing of LT Cable 1x400sq.mm.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories.

400 KVA T/F

250 KVA T/F

63 KVA T/F

25 KVA T/F

Dismounting of following capacity of T/F from double pole safly and safe cartage of T/F from work to Electricity Store Centre, Balrampur with loading & unloading.

250 KVA T/F

100 KVA T/F

25 KVA T/F

16 KVA T/F

10 KVA T/F

Decentralized materials:-Providing and fixing of following materials as per sanctioned Estimate/Package as per RESSPO U.P.P.C.L. drawing/ norms.(where is required).

Dropper Channel Holding clamp.

Dead end clamp

Suspension clamp

Nuts & Bolt. & washer all size.

F-Bracket with nut Bolt.

Alluminium lug Sutaible for Transformer

Copper L-piece various size.

FRP fencing (6feet. Height)

GI Pipe 6'dia

Fuse set.

clamp with nuts & bolts.

LT clamp

Control Cable 2x2.5mmsq

Battery Set 24Volt

Battery Charger

Cabinet of Battery Charger Set

GI Pipe 6" Dia

Copper L Piece 50x225x10mm

Copper L Piece 62x225x10mm

4 Core LT MCB Fuse Unit

3 Phase DO Fuse Set

11 KV TPMO Set

Structure of 33 KV VCB

Structure of 33 KV PT

Semens Argus/Avana Make Relay

Ashida ADR141A/Avana Make Relay

Alluminium lug Sutaible for Transformer

Boaring Type Erathing of All Required Material

Delta Earthing For 10/5 MVA Power T/F For Neutral & Body

LT Clamp With Eye Hook

MS Nut, Bolt All Size

Clamp All Type

F-Bracket

LT fuse set with Tailress unit 300amp.650V

LT fuse set with Tailress unit 500amp.650V

Copper fuse wire 23 SWG

Copper fuse wire 26 SWG

Copper 750x50x6mm.

FRP fencing (6 feet height)

PVC Tape

GI clamp

Lug crimping Tool.

Digital clamp Meter ( tong Tester)

Megar 5000V Motvani.

Tapariya tool kit.

Earth chane, discharge rod.

Tapariya player

Aluminum foldable ladder

HT Tape, empaere Tape.

Rubber Hand Gloves.

Ms Agarwal Electric Traders

SHRIMATI RUPWATI CONTRACTOR

R.S. INDUSTRIAL WORKS